D
System Name | Ghetto Rigs z490|x99|Acer 17 Nitro 7840hs/ 5600c40-2x16/ 4060/ 1tb acer stock m.2/ 4tb sn850x |
---|---|
Processor | 10900k w/Optimus Foundation | 5930k w/Black Noctua D15 |
Motherboard | z490 Maximus XII Apex | x99 Sabertooth |
Cooling | oCool D5 res-combo/280 GTX/ Optimus Foundation/ gpu water block | Blk D15 |
Memory | Trident-Z Royal 4000c16 2x16gb | Trident-Z 3200c14 4x8gb |
Video Card(s) | Titan Xp-water | evga 980ti gaming-w/ air |
Storage | 970evo+500gb & sn850x 4tb | 860 pro 256gb | Acer m.2 1tb/ sn850x 4tb| Many2.5" sata's ssd 3.5hdd's |
Display(s) | 1-AOC G2460PG 24"G-Sync 144Hz/ 2nd 1-ASUS VG248QE 24"/ 3rd LG 43" series |
Case | D450 | Cherry Entertainment center on Test bench |
Audio Device(s) | Built in Realtek x2 with 2-Insignia 2.0 sound bars & 1-LG sound bar |
Power Supply | EVGA 1000P2 with APC AX1500 | 850P2 with CyberPower-GX1325U |
Mouse | Redragon 901 Perdition x3 |
Keyboard | G710+x3 |
Software | Win-7 pro x3 and win-10 & 11pro x3 |
Benchmark Scores | Are in the benchmark section |
The best way to improve your temps is by splitting the loop from a single "say ½ tube to two ½ tubes.how hot is to hot? like 60c?
ya it seems so but would be an improvement going to 1500/h ?
System Name | DadsBadAss |
---|---|
Processor | I7 13700k w/ HEATKILLER IV PRO Copper Nickel |
Motherboard | MSI Z790 Tomahawk Wifi DDR4 |
Cooling | BarrowCH Boxfish 200mm-HWLabs SR2 420/GTX>S 360-BP Dual D5 MOD TOP- 2x Koolance PMP 450S |
Memory | 4x8gb HyperX Predator RGB DDR4 4000 |
Video Card(s) | Asrock 6800xt PG D w/ Byski A-AR6900XT-X |
Storage | WD SN850x 1TB NVME M.2/Adata XPG SX8200 PRO 1TB NVMe M.2 |
Display(s) | Acer XG270HU |
Case | ThermalTake X71 w/5 Noctua NF-A14 2000 IP67 PWM/3 Noctua NF-F12 2000 IP67 PWM/3 CorsairML120 Pro RGB |
Audio Device(s) | Klipsch Promedia 2.1 |
Power Supply | Seasonic Focus PX-850 w/CableMod PRO ModMesh RT-Series Black/Blue |
Mouse | Logitech G502 |
Keyboard | Black Aluminun Mechanical Clicky Thing With Blue LEDs, hows that for a name?! |
Software | Win11pro |
Everything you just said is wrong and he already has a d5 pump. Wheres the face palm meme when you need it?The best way to improve your temps is by splitting the loop from a single "say ½ tube to two ½ tubes.
Doing it like this is going to cut the water flow by 50% (slowing down the waterflow) and this speed decrease is going to give your radiators more time to extract that heat from the water!!
!!VERY IMPORTANT!!
High flow/High head pressure pumps won't give you better temps in fact quite the opposite as I explained above!!
Bottom line is get a pump that has decent head pressure and flow you can go with either DDC/D5 both are good but if you choose DDC make sure to get a heatsink for it!
Avoid other knockoffs such as VPP...
I had a permanent tap to drain loop, but we moved so I no longer have it. Was good for 8700K at 5.4ghz HT off about 45f delta on average.Hi,
I never got around it but I was going to try dropping one of my mora 360's in bucket with circulating cold water off a tap and drain or like above with some ice.
System Name | Not a thread ripper but pretty good. |
---|---|
Processor | Ryzen 9 5950x |
Motherboard | ASRock X570 Taichi (revision 1.06, BIOS/UEFI version P5.50) |
Cooling | EK-Quantum Velocity, EK-Quantum Reflection PC-O11, EK-CoolStream PE 360, Alphacool NexXxoS ST25 360 |
Memory | Micron DDR4-3200 ECC Unbuffered Memory (4 sticks, 128GB, 18ASF4G72AZ-3G2F1) |
Video Card(s) | XFX Radeon RX 5700 & EK-Quantum Vector Radeon RX 5700 +XT & Backplate |
Storage | Samsung 2TB 980 PRO 2TB Gen4x4 NVMe, Samsung 2TB 970 EVO Plus Gen3x4 NVMe x 2 |
Display(s) | 2 x 4K LG 27UL600-W (and HUANUO Dual Monitor Mount) |
Case | Lian Li PC-O11 Dynamic Black (original model) |
Power Supply | Corsair RM750x |
Mouse | Logitech M575 |
Keyboard | Corsair Strafe RGB MK.2 |
Software | Windows 10 Professional (64bit) |
Benchmark Scores | Typical for non-overclocked CPU. |
How many is too many for a d5? I went from 2 to 6 90 degree rotary fittings when I got my distroplate and thought the pump noise was from a lack of vibration dampener that I had previously with EK-Quantum Kinetic TBE D5 PWM that was always quiet except at top speed. I tend to keep my pump speed now between 50% to 60% to minimize the noise.Hi,
Only time you hear a d5 is if it's under stress
Best way to avoid stress is limit the use of 90 degree fittings.
Use 45 degree if you need to use a rotary otherwise if bending pipe do nice graceful bends not sharp turns.
I personally just use straight barb fittings and soft hosing.
System Name | Ghetto Rigs z490|x99|Acer 17 Nitro 7840hs/ 5600c40-2x16/ 4060/ 1tb acer stock m.2/ 4tb sn850x |
---|---|
Processor | 10900k w/Optimus Foundation | 5930k w/Black Noctua D15 |
Motherboard | z490 Maximus XII Apex | x99 Sabertooth |
Cooling | oCool D5 res-combo/280 GTX/ Optimus Foundation/ gpu water block | Blk D15 |
Memory | Trident-Z Royal 4000c16 2x16gb | Trident-Z 3200c14 4x8gb |
Video Card(s) | Titan Xp-water | evga 980ti gaming-w/ air |
Storage | 970evo+500gb & sn850x 4tb | 860 pro 256gb | Acer m.2 1tb/ sn850x 4tb| Many2.5" sata's ssd 3.5hdd's |
Display(s) | 1-AOC G2460PG 24"G-Sync 144Hz/ 2nd 1-ASUS VG248QE 24"/ 3rd LG 43" series |
Case | D450 | Cherry Entertainment center on Test bench |
Audio Device(s) | Built in Realtek x2 with 2-Insignia 2.0 sound bars & 1-LG sound bar |
Power Supply | EVGA 1000P2 with APC AX1500 | 850P2 with CyberPower-GX1325U |
Mouse | Redragon 901 Perdition x3 |
Keyboard | G710+x3 |
Software | Win-7 pro x3 and win-10 & 11pro x3 |
Benchmark Scores | Are in the benchmark section |
Hi,How many is too many for a d5? I went from 2 to 6 90 degree rotary fittings when I got my distroplate and thought the pump noise was from a lack of vibration dampener that I had previously with EK-Quantum Kinetic TBE D5 PWM that was always quiet except at top speed. I tend to keep my pump speed now between 50% to 60% to minimize the noise.
System Name | Not a thread ripper but pretty good. |
---|---|
Processor | Ryzen 9 5950x |
Motherboard | ASRock X570 Taichi (revision 1.06, BIOS/UEFI version P5.50) |
Cooling | EK-Quantum Velocity, EK-Quantum Reflection PC-O11, EK-CoolStream PE 360, Alphacool NexXxoS ST25 360 |
Memory | Micron DDR4-3200 ECC Unbuffered Memory (4 sticks, 128GB, 18ASF4G72AZ-3G2F1) |
Video Card(s) | XFX Radeon RX 5700 & EK-Quantum Vector Radeon RX 5700 +XT & Backplate |
Storage | Samsung 2TB 980 PRO 2TB Gen4x4 NVMe, Samsung 2TB 970 EVO Plus Gen3x4 NVMe x 2 |
Display(s) | 2 x 4K LG 27UL600-W (and HUANUO Dual Monitor Mount) |
Case | Lian Li PC-O11 Dynamic Black (original model) |
Power Supply | Corsair RM750x |
Mouse | Logitech M575 |
Keyboard | Corsair Strafe RGB MK.2 |
Software | Windows 10 Professional (64bit) |
Benchmark Scores | Typical for non-overclocked CPU. |
I suppose if you consider the input/outputs to my distroplate then the count is really 6 (fittings) + 8 (connections) (14 total 90 degree angles)Hi,
Think you found how many is to many I'd try and cut them in half at the least
Distro plates are really just for looks if at all possible switch to some 45 degree and soft tubing if need be
If you had a flow meter you'd also see some difference as well
But yeah D5 don't like restriction but then again not sure any pumps do/ dcc/..
I run my pwm pumps full blast with pwm wire disconnected never hear a peep out of them
But my loops are like an octopus I really don't care what they look like just how they perform but I also run 2 D5's
System Name | Ghetto Rigs z490|x99|Acer 17 Nitro 7840hs/ 5600c40-2x16/ 4060/ 1tb acer stock m.2/ 4tb sn850x |
---|---|
Processor | 10900k w/Optimus Foundation | 5930k w/Black Noctua D15 |
Motherboard | z490 Maximus XII Apex | x99 Sabertooth |
Cooling | oCool D5 res-combo/280 GTX/ Optimus Foundation/ gpu water block | Blk D15 |
Memory | Trident-Z Royal 4000c16 2x16gb | Trident-Z 3200c14 4x8gb |
Video Card(s) | Titan Xp-water | evga 980ti gaming-w/ air |
Storage | 970evo+500gb & sn850x 4tb | 860 pro 256gb | Acer m.2 1tb/ sn850x 4tb| Many2.5" sata's ssd 3.5hdd's |
Display(s) | 1-AOC G2460PG 24"G-Sync 144Hz/ 2nd 1-ASUS VG248QE 24"/ 3rd LG 43" series |
Case | D450 | Cherry Entertainment center on Test bench |
Audio Device(s) | Built in Realtek x2 with 2-Insignia 2.0 sound bars & 1-LG sound bar |
Power Supply | EVGA 1000P2 with APC AX1500 | 850P2 with CyberPower-GX1325U |
Mouse | Redragon 901 Perdition x3 |
Keyboard | G710+x3 |
Software | Win-7 pro x3 and win-10 & 11pro x3 |
Benchmark Scores | Are in the benchmark section |
Hi,I suppose if you consider the input/outputs to my distroplate then the count is really 6 (fittings) + 8 (connections) (14 total 90 degree angles)
System Name | Not a thread ripper but pretty good. |
---|---|
Processor | Ryzen 9 5950x |
Motherboard | ASRock X570 Taichi (revision 1.06, BIOS/UEFI version P5.50) |
Cooling | EK-Quantum Velocity, EK-Quantum Reflection PC-O11, EK-CoolStream PE 360, Alphacool NexXxoS ST25 360 |
Memory | Micron DDR4-3200 ECC Unbuffered Memory (4 sticks, 128GB, 18ASF4G72AZ-3G2F1) |
Video Card(s) | XFX Radeon RX 5700 & EK-Quantum Vector Radeon RX 5700 +XT & Backplate |
Storage | Samsung 2TB 980 PRO 2TB Gen4x4 NVMe, Samsung 2TB 970 EVO Plus Gen3x4 NVMe x 2 |
Display(s) | 2 x 4K LG 27UL600-W (and HUANUO Dual Monitor Mount) |
Case | Lian Li PC-O11 Dynamic Black (original model) |
Power Supply | Corsair RM750x |
Mouse | Logitech M575 |
Keyboard | Corsair Strafe RGB MK.2 |
Software | Windows 10 Professional (64bit) |
Benchmark Scores | Typical for non-overclocked CPU. |
Hi,
Yeah all fittings matter
Well if you're not trying to set any oc records it won't make a lot of difference leaving things as is
To much money to change things now, they don't give those rotaries away pricey darn things
My expertise is in fluid dynamics!Everything you just said is wrong and he already has a d5 pump. Wheres the face palm meme when you need it?
System Name | 1.FortySe7en VR rig 2. intel teliscope rig 3.MSI GP72MVR Leopard Pro . |
---|---|
Processor | 1.3900x @stock 2. i7 7700k @5. 3. i7 7700hq |
Motherboard | 1.aorus x570 ultra 2. z270 Maximus IX Hero |
Cooling | 1.Hard tube loop, cpu and gpu 2. Hard loop cpu and gpu |
Memory | 1.Gskill neo @3600 32gb 2.hyperxfury 32gb @3000 3. 16gb hyperx @2400 |
Video Card(s) | 1.GIGABYTE RTX 3080 GAMING OC WaterForce WB 2. Aorus RTX2080 3. 1060 3gb. Arc 770LE 16 gb |
Storage | 1 M.2 500gb , 2 3tb HDs 2. 256gb ssd, 3tbHD 3. 256 m.2. 1tb ssd |
Display(s) | 1.LG 50" UHD , oculus rift S.2 MSI Optix MAG342C UWHD. SONY bravia 1080p, . 3.17" 120 hz display |
Case | 1. Thermaltake P5 2. Thermaltake P3 |
Audio Device(s) | 1 Onboard 2 Onboard 3 Onboard |
Power Supply | 1.seasonic gx 850w 2. seasonic gx 750w |
Mouse | 1 ROG Gladius 2 Corsair m65 pro |
Keyboard | 1. ROG Strix Flare 2. Corsair F75 RBG 3. steelseries RBG |
VR HMD | rift and rift S and Quest 2. |
Software | 1. win10 pro 2. win10 pro 3, win10 home |
Benchmark Scores | 1.7821 cb20 ,cb15 3442 1c 204 cpu-z 1c 539 12c 8847 2. 1106 cb 3.cb 970 |
thats not very nice is it bud. expertise is fluid dynamics i think not.Also I'm not american which makes me instantly smarter
Everything you just said is wrong and he already has a d5 pump. Wheres the face palm meme when you need it?
System Name | Ghetto Rigs z490|x99|Acer 17 Nitro 7840hs/ 5600c40-2x16/ 4060/ 1tb acer stock m.2/ 4tb sn850x |
---|---|
Processor | 10900k w/Optimus Foundation | 5930k w/Black Noctua D15 |
Motherboard | z490 Maximus XII Apex | x99 Sabertooth |
Cooling | oCool D5 res-combo/280 GTX/ Optimus Foundation/ gpu water block | Blk D15 |
Memory | Trident-Z Royal 4000c16 2x16gb | Trident-Z 3200c14 4x8gb |
Video Card(s) | Titan Xp-water | evga 980ti gaming-w/ air |
Storage | 970evo+500gb & sn850x 4tb | 860 pro 256gb | Acer m.2 1tb/ sn850x 4tb| Many2.5" sata's ssd 3.5hdd's |
Display(s) | 1-AOC G2460PG 24"G-Sync 144Hz/ 2nd 1-ASUS VG248QE 24"/ 3rd LG 43" series |
Case | D450 | Cherry Entertainment center on Test bench |
Audio Device(s) | Built in Realtek x2 with 2-Insignia 2.0 sound bars & 1-LG sound bar |
Power Supply | EVGA 1000P2 with APC AX1500 | 850P2 with CyberPower-GX1325U |
Mouse | Redragon 901 Perdition x3 |
Keyboard | G710+x3 |
Software | Win-7 pro x3 and win-10 & 11pro x3 |
Benchmark Scores | Are in the benchmark section |
Hi,If I rerun my tubes I might be able to eliminate up to 6 90's but I did this this way specifically to minimize the number of tubes I needed to run horizontally since I'm doing soft tubing.
Anyway I don't mean to highjack this thread so I'll end it here.
System Name | 1. Glasshouse 2. Odin OneEye |
---|---|
Processor | 1. Ryzen 9 5900X (manual PBO) 2. Ryzen 9 7900X |
Motherboard | 1. MSI x570 Tomahawk wifi 2. Gigabyte Aorus Extreme 670E |
Cooling | 1. Noctua NH D15 Chromax Black 2. Custom Loop 3x360mm (60mm) rads & T30 fans/Aquacomputer NEXT w/b |
Memory | 1. G Skill Neo 16GBx4 (3600MHz 16/16/16/36) 2. Kingston Fury 16GBx2 DDR5 CL36 |
Video Card(s) | 1. Asus Strix Vega 64 2. Powercolor Liquid Devil 7900XTX |
Storage | 1. Corsair Force MP600 (1TB) & Sabrent Rocket 4 (2TB) 2. Kingston 3000 (1TB) and Hynix p41 (2TB) |
Display(s) | 1. Samsung U28E590 10bit 4K@60Hz 2. LG C2 42 inch 10bit 4K@120Hz |
Case | 1. Corsair Crystal 570X White 2. Cooler Master HAF 700 EVO |
Audio Device(s) | 1. Creative Speakers 2. Built in LG monitor speakers |
Power Supply | 1. Corsair RM850x 2. Superflower Titanium 1600W |
Mouse | 1. Microsoft IntelliMouse Pro (grey) 2. Microsoft IntelliMouse Pro (black) |
Keyboard | Leopold High End Mechanical |
Software | Windows 11 |
You're not hijacking anything. I'm learning something too. Very helpful for someone preparing to go water.If I rerun my tubes I might be able to eliminate up to 6 90's but I did this this way specifically to minimize the number of tubes I needed to run horizontally since I'm doing soft tubing.
Anyway I don't mean to highjack this thread so I'll end it here.
View attachment 259541
System Name | Silent |
---|---|
Processor | Ryzen 7800X3D @ 5.15ghz BCLK OC, TG AM5 High Performance Heatspreader |
Motherboard | ASUS ROG Strix X670E-I, chipset fans removed |
Cooling | Optimus AMD Raw Copper/Plexi, HWLABS Copper 240/40+240/30, D5, 4x Noctua A12x25, Mayhems Ultra Pure |
Memory | 32 GB Dominator Platinum 6150 MHz 26-36-36-48, 57ns AIDA, 2050 FLCK, 160 ns TRFC |
Video Card(s) | RTX 3080 Ti Founders Edition, Conductonaut Extreme, 18 W/mK MinusPad Extreme, Corsair XG7 Waterblock |
Storage | Intel Optane DC P1600X 118 GB, Samsung 990 Pro 2 TB |
Display(s) | 32" 240 Hz 1440p Samsung G7, 31.5" 165 Hz 1440p LG NanoIPS Ultragear |
Case | Sliger SM570 CNC Aluminium 13-Litre, 3D printed feet, custom front panel with pump/res combo |
Audio Device(s) | Audeze Maxwell Ultraviolet, Razer Nommo Pro |
Power Supply | Corsair SF750 Platinum, transparent custom cables, Sentinel Pro 1500 Online Double Conversion UPS |
Mouse | Razer Viper Pro V2 Mercury White w/Tiger Ice Skates & Pulsar Supergrip tape |
Keyboard | Wooting 60HE+ module, TOFU Redux Burgundy w/brass weight, Prismcaps White & Jellykey, lubed/modded |
Software | Windows 10 IoT Enterprise LTSC 19053.3803 |
Benchmark Scores | Legendary |
I've had this argument with a heathen before, I was saying "the cooler the better due to voltage leakage" they were saying as long as it wasn't throttling it didn't matter. Lol. Lmao even.I had a permanent tap to drain loop, but we moved so I no longer have it. Was good for 8700K at 5.4ghz HT off about 45f delta on average.
Using the same loop, 2700x at defaults, the cpu pinned all core 4.3ghz except under heavy load, defaulted to 3.9ghz any ways. But was interesting to play with reaching a max clock of 4.5ghz.
The tap to drain also really spectacular for TEC chilling. I accomplished 2700x all core 4ghz at 1.190v at load. Seems the cooler they run, the less they leak, seemingly dramatic results on a chip that typically needs 1.40v to achieve the same clock with any stability.
Obviously not practical. I had (still have and in use) delidded the processor and had to use an enlarged cold plate to achieve such results.
But worth it for thrills imo.
System Name | Ghetto Rigs z490|x99|Acer 17 Nitro 7840hs/ 5600c40-2x16/ 4060/ 1tb acer stock m.2/ 4tb sn850x |
---|---|
Processor | 10900k w/Optimus Foundation | 5930k w/Black Noctua D15 |
Motherboard | z490 Maximus XII Apex | x99 Sabertooth |
Cooling | oCool D5 res-combo/280 GTX/ Optimus Foundation/ gpu water block | Blk D15 |
Memory | Trident-Z Royal 4000c16 2x16gb | Trident-Z 3200c14 4x8gb |
Video Card(s) | Titan Xp-water | evga 980ti gaming-w/ air |
Storage | 970evo+500gb & sn850x 4tb | 860 pro 256gb | Acer m.2 1tb/ sn850x 4tb| Many2.5" sata's ssd 3.5hdd's |
Display(s) | 1-AOC G2460PG 24"G-Sync 144Hz/ 2nd 1-ASUS VG248QE 24"/ 3rd LG 43" series |
Case | D450 | Cherry Entertainment center on Test bench |
Audio Device(s) | Built in Realtek x2 with 2-Insignia 2.0 sound bars & 1-LG sound bar |
Power Supply | EVGA 1000P2 with APC AX1500 | 850P2 with CyberPower-GX1325U |
Mouse | Redragon 901 Perdition x3 |
Keyboard | G710+x3 |
Software | Win-7 pro x3 and win-10 & 11pro x3 |
Benchmark Scores | Are in the benchmark section |
Hi,I've had this argument with a heathen before, I was saying "the cooler the better due to voltage leakage" they were saying as long as it wasn't throttling it didn't matter. Lol. Lmao even.
Other friends have said delidding is "extreme", uhhh, no sweaty, liquid nitrogen xoc is extreme. Delidding is something I've literally done by hand on an 8700k once, in a general tools vice, using a dishtowel hahahahaha
You know what really grinds my gears tho? Noone makes waterblocks for twin dimm ram kits, only quad dimm, and who tf overclocks hard with 4 dimms?
Daddy wants to push 1.8 V+ as his 24/7 OC but is limited by thermals on the B Die. So I'm forced to be satisfied with 1.6/1.65 V with active airflow.
1.8v on b-die isn't that big of a deal. It's probably running warm because you left the heat sinks on which are attached by shit ass pads probably rated less than 3mk/h......I've had this argument with a heathen before, I was saying "the cooler the better due to voltage leakage" they were saying as long as it wasn't throttling it didn't matter. Lol. Lmao even.
Other friends have said delidding is "extreme", uhhh, no sweaty, liquid nitrogen xoc is extreme. Delidding is something I've literally done by hand on an 8700k once, in a general tools vice, using a dishtowel hahahahaha
You know what really grinds my gears tho? Noone makes waterblocks for twin dimm ram kits, only quad dimm, and who tf overclocks hard with 4 dimms?
Daddy wants to push 1.8 V+ as his 24/7 OC but is limited by thermals on the B Die. So I'm forced to be satisfied with 1.6/1.65 V with active airflow.
System Name | Not a thread ripper but pretty good. |
---|---|
Processor | Ryzen 9 5950x |
Motherboard | ASRock X570 Taichi (revision 1.06, BIOS/UEFI version P5.50) |
Cooling | EK-Quantum Velocity, EK-Quantum Reflection PC-O11, EK-CoolStream PE 360, Alphacool NexXxoS ST25 360 |
Memory | Micron DDR4-3200 ECC Unbuffered Memory (4 sticks, 128GB, 18ASF4G72AZ-3G2F1) |
Video Card(s) | XFX Radeon RX 5700 & EK-Quantum Vector Radeon RX 5700 +XT & Backplate |
Storage | Samsung 2TB 980 PRO 2TB Gen4x4 NVMe, Samsung 2TB 970 EVO Plus Gen3x4 NVMe x 2 |
Display(s) | 2 x 4K LG 27UL600-W (and HUANUO Dual Monitor Mount) |
Case | Lian Li PC-O11 Dynamic Black (original model) |
Power Supply | Corsair RM750x |
Mouse | Logitech M575 |
Keyboard | Corsair Strafe RGB MK.2 |
Software | Windows 10 Professional (64bit) |
Benchmark Scores | Typical for non-overclocked CPU. |
Distroplate did not come with washers and if it did it would have been a real PITA to install over the PITA it already was.Hi,
Nice build
Thread is about pumps and we're just adding what causes pump noise
The disro plate should of came with plastic washers to add between plate and case
Indeed those places you show are easy to change and improve flow and reduce pump noise a bit
The distro plate 90's will be the most fun couple 45's on one loop and straight barbs on the other might not be to bad
Or just leave one as is and straight barbs on one even you said 2 90's wasn't bad is was only when you added 4 more is when noise started.
There is a water cooling thread around here somewhere
A few but I think this one is good one to continue on if you wish to
Your cooling setup and why did you choose/go that route?
I have been thinking about the pro's and cons about air vs. Aio vs. Custom water cooling vs. Face cooling. I don't think I will take dry ice or ln2 in this thread as that is extreme cooling and not very usable for every day use. So to simply sum it up. This thread is to discuss what cooling...www.techpowerup.com
System Name | Silent |
---|---|
Processor | Ryzen 7800X3D @ 5.15ghz BCLK OC, TG AM5 High Performance Heatspreader |
Motherboard | ASUS ROG Strix X670E-I, chipset fans removed |
Cooling | Optimus AMD Raw Copper/Plexi, HWLABS Copper 240/40+240/30, D5, 4x Noctua A12x25, Mayhems Ultra Pure |
Memory | 32 GB Dominator Platinum 6150 MHz 26-36-36-48, 57ns AIDA, 2050 FLCK, 160 ns TRFC |
Video Card(s) | RTX 3080 Ti Founders Edition, Conductonaut Extreme, 18 W/mK MinusPad Extreme, Corsair XG7 Waterblock |
Storage | Intel Optane DC P1600X 118 GB, Samsung 990 Pro 2 TB |
Display(s) | 32" 240 Hz 1440p Samsung G7, 31.5" 165 Hz 1440p LG NanoIPS Ultragear |
Case | Sliger SM570 CNC Aluminium 13-Litre, 3D printed feet, custom front panel with pump/res combo |
Audio Device(s) | Audeze Maxwell Ultraviolet, Razer Nommo Pro |
Power Supply | Corsair SF750 Platinum, transparent custom cables, Sentinel Pro 1500 Online Double Conversion UPS |
Mouse | Razer Viper Pro V2 Mercury White w/Tiger Ice Skates & Pulsar Supergrip tape |
Keyboard | Wooting 60HE+ module, TOFU Redux Burgundy w/brass weight, Prismcaps White & Jellykey, lubed/modded |
Software | Windows 10 IoT Enterprise LTSC 19053.3803 |
Benchmark Scores | Legendary |
Nah I used thermal grizzly pads when repadding. The heat is also an effect of very tight timings.1.8v on b-die isn't that big of a deal. It's probably running warm because you left the heat sinks on which are attached by shit ass pads probably rated less than 3mk/h......
But it really depends if you want to call pulling heat sinks off as crazy as delidding.
But delidding is my thing. I've been an AMD soldered delidder for many years.
In fact, a certain someone, pretty darn popular, likes the type of razors I used in conjunction with a tutorial from some decade ago. I won't say any names though, but I'm sure you know about some other delidders outhere on YouTube.
The De-Lidding of Phenoms I-&-II Tutorial. - EXTREME Overclocking Forums
The De-Lidding of Phenoms I-&-II Tutorial. Essential Tutorials, Guides, & Infoforums.extremeoverclocking.com
But for sure delidding is great. 8700k 15 to 20c drop in core temps right off the bat.
Don't even get me started on how many hours wasted on lapping before DING!!! Let's just remove the fuckin plate. Then we can use a larger one. Or a smaller one. Or just stick the damn block on the die and be done with it.
But everyone has a different outlook. I'm really good with hardware modification cause I can work with my hands. A lot of people are not good with their hands but have other fantastic talents like hip shot to the head with the awp in css/go. Lol
Yeah. 38c limit at 1.60v and up.Nah I used thermal grizzly pads when repadding. The heat is also an effect of very tight timings.
System Name | Silent |
---|---|
Processor | Ryzen 7800X3D @ 5.15ghz BCLK OC, TG AM5 High Performance Heatspreader |
Motherboard | ASUS ROG Strix X670E-I, chipset fans removed |
Cooling | Optimus AMD Raw Copper/Plexi, HWLABS Copper 240/40+240/30, D5, 4x Noctua A12x25, Mayhems Ultra Pure |
Memory | 32 GB Dominator Platinum 6150 MHz 26-36-36-48, 57ns AIDA, 2050 FLCK, 160 ns TRFC |
Video Card(s) | RTX 3080 Ti Founders Edition, Conductonaut Extreme, 18 W/mK MinusPad Extreme, Corsair XG7 Waterblock |
Storage | Intel Optane DC P1600X 118 GB, Samsung 990 Pro 2 TB |
Display(s) | 32" 240 Hz 1440p Samsung G7, 31.5" 165 Hz 1440p LG NanoIPS Ultragear |
Case | Sliger SM570 CNC Aluminium 13-Litre, 3D printed feet, custom front panel with pump/res combo |
Audio Device(s) | Audeze Maxwell Ultraviolet, Razer Nommo Pro |
Power Supply | Corsair SF750 Platinum, transparent custom cables, Sentinel Pro 1500 Online Double Conversion UPS |
Mouse | Razer Viper Pro V2 Mercury White w/Tiger Ice Skates & Pulsar Supergrip tape |
Keyboard | Wooting 60HE+ module, TOFU Redux Burgundy w/brass weight, Prismcaps White & Jellykey, lubed/modded |
Software | Windows 10 IoT Enterprise LTSC 19053.3803 |
Benchmark Scores | Legendary |
HHHHH but my capellix RGB looks so good in dominator platinum
View attachment 259717
Bad photo, side panels are off as I cleaned recently, ram fans are attached to side panel hence the disconnected headers.
Also cable management needs doing... but who has time for that when you can make the pc go faster instead?
System Name | Silent |
---|---|
Processor | Ryzen 7800X3D @ 5.15ghz BCLK OC, TG AM5 High Performance Heatspreader |
Motherboard | ASUS ROG Strix X670E-I, chipset fans removed |
Cooling | Optimus AMD Raw Copper/Plexi, HWLABS Copper 240/40+240/30, D5, 4x Noctua A12x25, Mayhems Ultra Pure |
Memory | 32 GB Dominator Platinum 6150 MHz 26-36-36-48, 57ns AIDA, 2050 FLCK, 160 ns TRFC |
Video Card(s) | RTX 3080 Ti Founders Edition, Conductonaut Extreme, 18 W/mK MinusPad Extreme, Corsair XG7 Waterblock |
Storage | Intel Optane DC P1600X 118 GB, Samsung 990 Pro 2 TB |
Display(s) | 32" 240 Hz 1440p Samsung G7, 31.5" 165 Hz 1440p LG NanoIPS Ultragear |
Case | Sliger SM570 CNC Aluminium 13-Litre, 3D printed feet, custom front panel with pump/res combo |
Audio Device(s) | Audeze Maxwell Ultraviolet, Razer Nommo Pro |
Power Supply | Corsair SF750 Platinum, transparent custom cables, Sentinel Pro 1500 Online Double Conversion UPS |
Mouse | Razer Viper Pro V2 Mercury White w/Tiger Ice Skates & Pulsar Supergrip tape |
Keyboard | Wooting 60HE+ module, TOFU Redux Burgundy w/brass weight, Prismcaps White & Jellykey, lubed/modded |
Software | Windows 10 IoT Enterprise LTSC 19053.3803 |
Benchmark Scores | Legendary |
It's UGLY AF right now, no GF since 4 months so doesn't need to look pretty - I'll eventually make a custom distro for the front panel so the res/pump combo isn't just stuck out the front panel, whcich I removed.