- Joined
- Jul 27, 2011
- Messages
- 125 (0.03/day)
System Name | ----- |
---|---|
Processor | INTEL I5 2500 @ 3.3Ghz |
Motherboard | GIGABYTE Z68XP-UD4 Bios F6 |
Cooling | ----- |
Memory | G.SKILL 8192 DDR3 9-9-9-27 @ 2T |
Video Card(s) | EVGA NVIDIA 560 GTX |
Storage | CRUCIAL SSD M4 64gb Firmware 000F |
Display(s) | ----- |
Case | ----- |
Audio Device(s) | Onboard (use headphones) |
Power Supply | COOLER MASTER 1000w GOLD 80+ |
Software | WINDOWS 7 Ultimate 64 bits |
Hi all, finally i´m trying to configure the bios on my motherboard, but i have a few questions
about a settings:
1) i have this cpu intel 2500, no K version @ 3.33, i see an option called Multi step load line
line, i research in google thiss and i found multiple opinion but i can understand what choose,
this option in my motherboard have ten levels, this is where i go ¿wich level i should choose
or i should leave disabled if i no oc the cpu?
2) i fix a vcore to my cpu to 1.060 and enable all this settings
C1E, C3\C6, CPU thermal monitor, CPU eist, BI-directional, but when go to windows desktop
only drop the multiplier to x15 and not the vcore, ¿this happend because i fix the vcore?,
and the other option i see is a DVID (i cant remember this is the exact name), my question
is ¿can i fix a vcore to full load and another to idlle?
3) this option i leave at deafult:
PWN frequency AUTO, CPU over current AUTO, Internal CPU PLL DISABLED
¿change something or leave it like this?
I hope can help me and sorry for my bad english
Bye all M@rcos
about a settings:
1) i have this cpu intel 2500, no K version @ 3.33, i see an option called Multi step load line
line, i research in google thiss and i found multiple opinion but i can understand what choose,
this option in my motherboard have ten levels, this is where i go ¿wich level i should choose
or i should leave disabled if i no oc the cpu?
2) i fix a vcore to my cpu to 1.060 and enable all this settings
C1E, C3\C6, CPU thermal monitor, CPU eist, BI-directional, but when go to windows desktop
only drop the multiplier to x15 and not the vcore, ¿this happend because i fix the vcore?,
and the other option i see is a DVID (i cant remember this is the exact name), my question
is ¿can i fix a vcore to full load and another to idlle?
3) this option i leave at deafult:
PWN frequency AUTO, CPU over current AUTO, Internal CPU PLL DISABLED
¿change something or leave it like this?
I hope can help me and sorry for my bad english
Bye all M@rcos
Last edited: