manofthem
WCG-TPU Team All-Star!
- Joined
- Jan 9, 2011
- Messages
- 10,960 (2.27/day)
- Location
- Florida
Processor | 3900X @ 4.0 |
---|---|
Motherboard | Asus ROG Strix X570-E |
Cooling | DeepCool Castle 360EX |
Memory | G Skill Trident Z Neo 32GB 3600 |
Video Card(s) | RX 5700 XT Pulse |
Storage | Sabrent Rocket Q 1TB |
Display(s) | LG 34UC88 |
Case | Thermaltake P3 |
Power Supply | Super Flower Leadex III 750w |
Mouse | Logitech G900 |
Keyboard | G Skill KM570 MX Silver |
Software | Windows 10 Pro |
Hello all,
I just received my Corsair H60 kit, and I'm getting ready to install it. But before I do, I would appreciate some of your insight with the following:
1) Use pre-applied thermal compound or Artic Silver5? (I read pre-applied is shin-etsu x2/3, supposedly good stuff, not sure)
2) My understanding is that it's pre-filled so I don't need to worry about water levels or air trapped, right?
3) Anything else I should know or be aware of as this is my first water-cooling adventure?
I appreciate the help from you all very much. I hope this goes well and is a fine replacement for my Zalman CNPS9700 110mm!
I just received my Corsair H60 kit, and I'm getting ready to install it. But before I do, I would appreciate some of your insight with the following:
1) Use pre-applied thermal compound or Artic Silver5? (I read pre-applied is shin-etsu x2/3, supposedly good stuff, not sure)
2) My understanding is that it's pre-filled so I don't need to worry about water levels or air trapped, right?
3) Anything else I should know or be aware of as this is my first water-cooling adventure?
I appreciate the help from you all very much. I hope this goes well and is a fine replacement for my Zalman CNPS9700 110mm!
Last edited: