- Joined
- May 14, 2004
- Messages
- 27,034 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
This voltmod applies to:
The blue Sapphire PCB has the same layout as the red ATI PCB, so it will work on all those models no matter which manufacturer.
On most cards (like in our picture) there is no resistor installed in the VGPU location.
Solder to both contacts of the empty pad then, otherwise solder to the contacts of the resistor.
If there is no resistor installed (like in our picture) you have to make a pencil bridge between the contacts of the empty solder pad, otherwise draw directly on the resistor.
The picture shows a card with VID code 01101, which is 1.35V.
- X800 Non-Pro, X800 XL and X850 PCI-Express using PCB #A474
- X850 AGP using PCB #A475
The blue Sapphire PCB has the same layout as the red ATI PCB, so it will work on all those models no matter which manufacturer.
Overview
Mods to solder
On most cards (like in our picture) there is no resistor installed in the VGPU location.
Solder to both contacts of the empty pad then, otherwise solder to the contacts of the resistor.
Pencil mods
If there is no resistor installed (like in our picture) you have to make a pencil bridge between the contacts of the empty solder pad, otherwise draw directly on the resistor.
Modifying the VID input of the VGPU controller
The picture shows a card with VID code 01101, which is 1.35V.
Last edited: