Rammsteiner
New Member
- Joined
- Feb 5, 2005
- Messages
- 168 (0.02/day)
Processor | AMD Phenom X4 9850BE (DENEB, where art thou!?) |
---|---|
Motherboard | DFI Lanparty UT 790FX-M2R (waiting on 790FX/SB750) |
Cooling | TRUE |
Memory | 4x 1GB Transcend AxeRAM DDR1066 'D9GMH' |
Video Card(s) | Sapphire HD 4870X2 |
Storage | 2x WD 74GB Raptor + 3Ware 9650SE @ RAID 0 |
Display(s) | Samsung SyncMaster 245B |
Case | Silverstone TJ-10 |
Audio Device(s) | Creative Sound Blaster X-Fi Fatal1ty FPS |
Power Supply | PP&C Quad Silencer 750W |
Hello,
Im new to this site, I was watching the mods whole the time lol. And after long thinking I decided to do it. Got my Vcore upto 1,45, VDD 2,12 and VDDQ 2,22(maybe the VDDQ should be a little lower?).
I screwed my case open, build a stupid frame of LEGO(its finally good for something lmao) and laid two fans in it. With a pretty 'hot' room(20/25 degrees), case open, and these two fans it wont go over the 65 degrees at 540MHz. I did the Pipelines mod(with BIOS, have a ViVo) so I know I dont should expect much more from core, its running also at 555Mhz, but the problem now is the memory....
As you guys can see some lines above, the Volts are pretty 'normal'(ok, can go higher lol), the degrees are pretty low but I just cant get my memory without artifacts at 600Mhz...!?
Should i do the IGPU and higher the VGPU? Or sometihing else? Right now its pretty cold in my room(10 degrees), window open, case open, all fans busy, my memory isnt getting much hotter than 20 degrees... What do you guys think to do? Ill do a 'mod project' in a few months, so watercooling will be there too probably, but my card is already pretty good cooled...
Thx in advance
Im new to this site, I was watching the mods whole the time lol. And after long thinking I decided to do it. Got my Vcore upto 1,45, VDD 2,12 and VDDQ 2,22(maybe the VDDQ should be a little lower?).
I screwed my case open, build a stupid frame of LEGO(its finally good for something lmao) and laid two fans in it. With a pretty 'hot' room(20/25 degrees), case open, and these two fans it wont go over the 65 degrees at 540MHz. I did the Pipelines mod(with BIOS, have a ViVo) so I know I dont should expect much more from core, its running also at 555Mhz, but the problem now is the memory....
As you guys can see some lines above, the Volts are pretty 'normal'(ok, can go higher lol), the degrees are pretty low but I just cant get my memory without artifacts at 600Mhz...!?
Should i do the IGPU and higher the VGPU? Or sometihing else? Right now its pretty cold in my room(10 degrees), window open, case open, all fans busy, my memory isnt getting much hotter than 20 degrees... What do you guys think to do? Ill do a 'mod project' in a few months, so watercooling will be there too probably, but my card is already pretty good cooled...
Thx in advance