joinmeindeath417
New Member
- Joined
- Jul 6, 2006
- Messages
- 2,007 (0.31/day)
- Location
- New Jersey
System Name | SINNAH |
---|---|
Processor | AMD Phenom II x4 955 3.8ghz AIR |
Motherboard | ASUS M4A79XTD EVO |
Cooling | 3 fans of MADNESS |
Memory | 4GB ADATA XPG DDR3 1600G |
Video Card(s) | ATI 4890 1GB GDDR5 memory |
Storage | 500gb SATAII |
Display(s) | 23" 1080p Acer H233Hbmid |
Case | Antec Three Hundred |
Audio Device(s) | Onboard |
Power Supply | OCZ StealthXStream / 600W / Active PFC |
Software | Windows 7 Professional 64bit |
okay...so this is hard to explain but i'll try
i bought a dual channel kit of PQI ddr2 800....my motherboard supports ddr2 800 ...
put the stick of ram in...slots 0 and 2 like im suppose to..boot up and hear the "NO/BAD ram post...0.o so at this point im getting alittle agitated...so i SPEED MY ASS TO COMPUSA cough::ripoff:cough but HOLY SHIT! they have a 512 dual channel of PNY ram for 39 dollars...DEALLLLLLL score yeah whatever...put the ram in...it works (ddr 667) whola! but now im pisssssed! cause i just spent 100 bucks on ddr2 800...so i was like why not put all 4 sticks in...and for some reason NOW!!! it reads 1.5 gigbytes of ram!!! running at ddr 667 ...and i know this board supports ddr 800 0.o my processor is an AM2 Athlon 3800+ x2 ...
anyone can help or am i stuck running my ram at DDR667 vs DDR800 0.o
or did PQI mess up..and well you know...try putting the timing too high and it cant read at that speed?
thanks in advance!
i bought a dual channel kit of PQI ddr2 800....my motherboard supports ddr2 800 ...
put the stick of ram in...slots 0 and 2 like im suppose to..boot up and hear the "NO/BAD ram post...0.o so at this point im getting alittle agitated...so i SPEED MY ASS TO COMPUSA cough::ripoff:cough but HOLY SHIT! they have a 512 dual channel of PNY ram for 39 dollars...DEALLLLLLL score yeah whatever...put the ram in...it works (ddr 667) whola! but now im pisssssed! cause i just spent 100 bucks on ddr2 800...so i was like why not put all 4 sticks in...and for some reason NOW!!! it reads 1.5 gigbytes of ram!!! running at ddr 667 ...and i know this board supports ddr 800 0.o my processor is an AM2 Athlon 3800+ x2 ...
anyone can help or am i stuck running my ram at DDR667 vs DDR800 0.o
or did PQI mess up..and well you know...try putting the timing too high and it cant read at that speed?
thanks in advance!