- Joined
- Apr 19, 2009
- Messages
- 1,045 (0.19/day)
- Location
- Romania
Processor | i7-9700 |
---|---|
Motherboard | Gigabyte Z390 AORUS PRO |
Memory | 32GB DDR4 |
Video Card(s) | msi 1080 |
Storage | Samsung SSD 850 pro 2TB+1tb hdd 7200rpm+ 1tb 970pro |
Software | Mageia 6 + Windows 10 |
Hi, I have SAPPHIRE HD 4850 512MB GDDR3 PCI-E Dual Slot Fansink, with RBE I want to change fan speed in 2d(idle), to make the cart more silent, now it stay at 37% with activity 0% , 41C, from sapphire support I received " Slow down the fan speed in 2D mode will still have rick to cause the GPU damage.
23% fan speed is low enough and balance with GPU temperature.
Less than 20% will cause above issue to damage the GPU , so even under CCC , it only starts from 20%.", k I want 25%, but when I change this valor in bios with RBE , others settings change too, although I want to keep it the others settings (I have latest bios from here http://www.techpowerup.com/vgabios/...del=HD+4850&interface=PCI-E&memSize=512)..any ideea were i'm wrong...
23% fan speed is low enough and balance with GPU temperature.
Less than 20% will cause above issue to damage the GPU , so even under CCC , it only starts from 20%.", k I want 25%, but when I change this valor in bios with RBE , others settings change too, although I want to keep it the others settings (I have latest bios from here http://www.techpowerup.com/vgabios/...del=HD+4850&interface=PCI-E&memSize=512)..any ideea were i'm wrong...