RBE - General information and discussion

Name Change · Mar 21, 2008

Which clocks should I change in RBE only 3d high or 3d high and low to same oc... When i change only 3d high my clocks don;t change... This in my stock clocks...

BAGZZlash · Mar 22, 2008

I usually change both 3D settings.

DonGeilo · Mar 25, 2008

DonGeilo said:
Hi, you have a nice tool there.

I have this Card, http://geizhals.at/deutschland/?a=294666&t=alle&plz=&va=nachnahme&vl=de&v=l#filterform

with the attached Bios

and i have these problem

My Card have an Fan Control, but i can´t go under 30%.

Sorry for Quote, but nobody answered me.

BAGZZlash · Mar 25, 2008

DonGeilo said:
Sorry for Quote, but nobody answered me.

Try v1.08. If it doesn't work, wait for v1.09.

DonGeilo · Mar 25, 2008

BAGZZlash said:
Try v1.08. If it doesn't work, wait for v1.09.

okay, V1.08 doensn´t work, i can fix the fancontrol, but the Fan doesn´t go under 30%. Did you need a Bios from my GeCube Card to Fix this ?

pnovack · Mar 26, 2008

PowerColor 3850 AGP problem

Hi,
I have a problem with 3850 AGP card. PowerColor card use good cooling system and that's why i bought this card (not Sapphire one). But then i realized it could be mistake. Fan is constantly working at 100%. It's sounds like a small hair dryier. From the other hand GPU has always temperature below 55 C... but i don't need that. Even in 2D mode fan works at 100%! Radiator is big and made of copper and fan is also big, so it hasn't work as fast as it is. Could RBE help with that? Unfortunately i'm a modding noob (have never changed BIOS).

This is problem has every user of this card... so fixing/changing this would be a great thing...

trog100 · Mar 26, 2008

pnovack said:
Hi,
I have a problem with 3850 AGP card. PowerColor card use good cooling system and that's why i bought this card (not Sapphire one). But then i realized it could be mistake. Fan is constantly working at 100%. It's sounds like a small hair dryier. From the other hand GPU has always temperature below 55 C... but i don't need that. Even in 2D mode fan works at 100%! Radiator is big and made of copper and fan is also big, so it hasn't work as fast as it is. Could RBE help with that? Unfortunately i'm a modding noob (have never changed BIOS).

This is problem has every user of this card... so fixing/changing this would be a great thing...

i have a gigabyte 3870 card that comes with a small zalman heatsink/fan.. the fan has no speed control and simply runs flat out all the time.. sounds similar to the way your card is done.. the only difference being the little salman cooler does a reasonable job and isnt noisy..

u might have to think about a cooler change.. the fan u have might not have any speed control.. just a simple two wire job..

trog

CrackerJack · Mar 26, 2008

DonGeilo said:
okay, V1.08 doensn´t work, i can fix the fancontrol, but the Fan doesn´t go under 30%. Did you need a Bios from my GeCube Card to Fix this ?

what temp did you set for 30%?

repsol23 · Mar 26, 2008

pnovack said:
Hi,
I have a problem with 3850 AGP card. PowerColor card use good cooling system and that's why i bought this card (not Sapphire one). But then i realized it could be mistake. Fan is constantly working at 100%. It's sounds like a small hair dryier. From the other hand GPU has always temperature below 55 C... but i don't need that. Even in 2D mode fan works at 100%! Radiator is big and made of copper and fan is also big, so it hasn't work as fast as it is. Could RBE help with that? Unfortunately i'm a modding noob (have never changed BIOS).

This is problem has every user of this card... so fixing/changing this would be a great thing...

I have the exact same card and mine seems to have been working properly when I had the fan. If I am not mistaken it would run 100% anytime it was above 45 - 50C. I have been able to cool my case to around 25C and my card temps never above 40 C and fan never broke more than 80% or so and would run as low as 40% with no load. I now use chilled water and temps never reach more than 21-22C.

BAGZZlash · Mar 27, 2008

Please everyone try v1.09!

DonGeilo · Mar 27, 2008

BAGZZlash said:
Please everyone try v1.09!

Hi, I have try it.

When i juse this

settings, my fan doesn´t go under an doesn´t go over 30%.

I was fixed at 30%.

Now i will try the table settings.

But the fan doesn´t go under 30% there to.

CrackerJack · Mar 27, 2008

DonGeilo said:
Hi, I have try it.

When i juse this settings, my fan doesn´t go under an doesn´t go over 30%.

I was fixed at 30%.

Now i will try the table settings.

But the fan doesn´t go under 30% there to.

Try to keep an eye out for the temps. What's the temps during gaming?

DonGeilo · Mar 27, 2008

The problem is that the fan doesn´t go under and over 30% when I create a bios with the editor.

VuurVOS · Mar 27, 2008

I got a smilair problem with RBE 1.09. I can't get the fan speed at min 30%

BAGZZlash · Mar 27, 2008

VuurVOS said:
I got a smilair problem with RBE 1.09. I can't get the fan speed at min 30%

What card do you have and did that happen with older RBE versions as well?

VuurVOS · Mar 27, 2008

BAGZZlash said:
What card do you have and did that happen with older RBE versions as well?

I have a (Build By ATI/RED PCB/DUAL SLOT) Sapphire HD3870. With the older version I lowered the thresshold to 55 degrees and it worked. I didn't try this with the newer version. I only tried to raise the min fan speed. I first tried 30% and a reboot later I tried 50%. 50%must create some more noise and lower the temps. Temps are also the same like before

BAGZZlash · Mar 28, 2008

VuurVOS said:
I have a (Build By ATI/RED PCB/DUAL SLOT) Sapphire HD3870. With the older version I lowered the thresshold to 55 degrees and it worked. I didn't try this with the newer version. I only tried to raise the min fan speed. I first tried 30% and a reboot later I tried 50%. 50%must create some more noise and lower the temps. Temps are also the same like before

So what is the problem, do you want your minimum fan speed above or below 30%? First of all, you should try reading your actual fan duty using RivaTuner's hardware monitor. Then, you should find out if the settings made using RBE do any change at all. If they do, try the settings "duty cycle min" and "Tmin". If the settings' meanings are somewhat unclear to you, you should click the blue hint link for some explanation. Then come back again and tell me what's the problem.

Tim_HKG · Mar 28, 2008

To: BAGZZlash

Firstly, thanks for your wonderful program! I'd like to change the clock settings from 777/1126 to 830/1200, which parts on the picture should I modify? Besides, will it affect the power-saving function of "PowerPlay" after the modification? Please "circle" the parts to be modified on the below picture.

Thanks in advance!

VuurVOS · Mar 28, 2008

@TIM_HKG
You only need to change the State 2 - mode 3 - "high 3D" speeds. Your Powerplay stays the same except that your card is running 830/1200 in 3D mode

AsRock · Mar 28, 2008

BAGZZlash said:
What was the matter? Can you explain a little more?
You should try v1.08. I's completely rewritten!

Ok, found the issue. Happy to say it was not due to your program.

Issue is in the ram on top side of the card ( Heat ). Been meaning to make a cooler for it just not got around to it lol..

intel igent · Mar 28, 2008

Any possible mods for 3850 AGP cards?

BAGZZlash · Mar 28, 2008

intel igent said:
Any possible mods for 3850 AGP cards?

Did you try?

Tim_HKG · Mar 28, 2008

VuurVOS said:
@TIM_HKG
You only need to change the State 2 - mode 3 - "high 3D" speeds. Your Powerplay stays the same except that your card is running 830/1200 in 3D mode

Thanks for your help and BAGZZlash, his program!

Raven · Mar 28, 2008

Tried with RBE 1.09, x1950pro AGP version. I saved the bios with Atiwinflash 2.0.0.7

I receive this error message:

Thanx!

CrackerJack · Mar 28, 2008

Raven said:
Tried with RBE 1.09, x1950pro AGP version. I saved the bios with Atiwinflash 2.0.0.7

I receive this error message:

Thanx!

This is for HD 2k series and up! Use Rabit for the 1k series, it works great.

System Name	money pit..
Processor	Intel 9900K 4.8 at 1.152 core voltage minus 0.120 offset
Motherboard	Asus rog Strix Z370-F Gaming
Cooling	Dark Rock TF air cooler.. Stock vga air coolers with case side fans to help cooling..
Memory	32 gb corsair vengeance 3200
Video Card(s)	Palit Gaming Pro OC 2080TI
Storage	150 nvme boot drive partition.. 1T Sandisk sata.. 1T Transend sata.. 1T 970 evo nvme m 2..
Display(s)	27" Asus PG279Q ROG Swift 165Hrz Nvidia G-Sync, IPS.. 2560x1440..
Case	Gigabyte mid-tower.. cheap and nothing special..
Audio Device(s)	onboard sounds with stereo amp..
Power Supply	EVGA 850 watt..
Mouse	Logitech G700s
Keyboard	Logitech K270
Software	Win 10 pro..
Benchmark Scores	Firestike 29500.. timepsy 14000..

Processor	i9 10900x @ 4.6 GHz w/ 1.266 V
Motherboard	Asus Prime x299 - Deluxe
Cooling	320 (x2) and 220 (x2) Rads single loop w/ ML120 pros (x12) ML140 pros (x3)
Memory	G.Skill Trident (4x8) DDR4-4000 CL15 @ 1.50V
Video Card(s)	EVGA FTW3 3080 Ti @ 1900 MHz w/ 900 mV
Storage	Samsung 970 500 GB & 1 TB NVME's
Display(s)	Dell 27" 144Hz (x2)
Case	TT Core x71
Power Supply	Corsair RM1000x

System Name	Ryzen5900X
Processor	AMD Ryzen 5900X
Motherboard	Gigabyte B550 AORUS PRO AC
Cooling	NZXT Kraken X62
Memory	4x G.Skill F4-3600C17D-8GTZ
Video Card(s)	AMD Radeon RX 6800XT Midnight Black

System Name	Ryzen5900X
Processor	AMD Ryzen 5900X
Motherboard	Gigabyte B550 AORUS PRO AC
Cooling	NZXT Kraken X62
Memory	4x G.Skill F4-3600C17D-8GTZ
Video Card(s)	AMD Radeon RX 6800XT Midnight Black

System Name	Ryzen5900X
Processor	AMD Ryzen 5900X
Motherboard	Gigabyte B550 AORUS PRO AC
Cooling	NZXT Kraken X62
Memory	4x G.Skill F4-3600C17D-8GTZ
Video Card(s)	AMD Radeon RX 6800XT Midnight Black

Processor	AMD 3900X \ AMD 7700X
Motherboard	ASRock AM4 X570 Pro 4 \ ASUS X670Xe TUF
Cooling	D15
Memory	Patriot 2x16GB PVS432G320C6K \ G.Skill Flare X5 F5-6000J3238F 2x16GB
Video Card(s)	eVga GTX1060 SSC \ XFX RX 6950XT RX-695XATBD9
Storage	Sammy 860, MX500, Sabrent Rocket 4 Sammy Evo 980 \ 1xSabrent Rocket 4+, Sammy 2x990 Pro
Display(s)	Samsung 1080P \ LG 43UN700
Case	Fractal Design Pop Air 2x140mm fans from Torrent \ Fractal Design Torrent 2 SilverStone FHP141x2
Audio Device(s)	Yamaha RX-V677 \ Yamaha CX-830+Yamaha MX-630 Infinity RS4000\Paradigm P Studio 20, Blue Yeti
Power Supply	Seasonic Prime TX-750 \ Corsair RM1000X Shift
Mouse	Steelseries Sensei wireless \ Steelseries Sensei wireless
Keyboard	Logitech K120 \ Wooting Two HE
Benchmark Scores	Meh benchmarks.

System Name	old school / new school
Processor	3.0e C0 @ 3.6 / e5200
Motherboard	p4p800e-dlx / p5q-DLX
Cooling	custom water see sig / air
Memory	2x1g oczPC4000EbPl / 2x2g ocz2rpr1066
Video Card(s)	3850AGP / 4890vaporX
Storage	36g raptor+120g wd / wd 1001fals 1tb
Display(s)	BenQ / sharpAQUOS LC-37D64U
Case	modded antec plusview / generic
Audio Device(s)	audigy 2zs / ASUS Xonar HDAV1.3
Power Supply	fan/cable modded powerstream 520 / OCZ 700mxsp
Software	Xp pro SP2 / VISTA ultimate OEM

RBE - General information and discussion

New Member

RBE Author

New Member

RBE Author

New Member

New Member

Attachments

RBE Author

New Member

New Member

RBE Author

RBE Author

New Member

TPU addict

New Member

RBE Author

New Member

New Member