• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

RC Clubhouse!

D

Deleted member 24505

Guest
Have fun with that chopper :),i'm starting to get used to mine now,i can hover it about 3 feet off the floor now.

I'm thinking of getting this as a basis for my full channel chopper

http://www.nitroplanes.com/exi450arfrar.html
.
 
Last edited by a moderator:

Mediocre

New Member
Joined
Jun 11, 2006
Messages
1,237 (0.19/day)
Processor C2D E8400 @ 3.60GHz
Motherboard ASUS P5Q-Pro w/ extra Vreg HS
Cooling Apogee GTX, 2x120mm DD, MCP-1000P Res/Pump, all 3/8" 7x80mm (4x push/pull, 2x exhaust, 1x side)
Memory 2 x 1GB Corsair Dominator DDR2 1066 @ 800 (4-3-3-6)
Video Card(s) EVGA 9800GTX+
Storage 3 x 80 GB WD SATA300 (2x RAID 0)
Display(s) Scepter x37 1080p 37" LCD & Samsung 204B
Case CoolerMaster HAF932
Audio Device(s) Onboard
Power Supply Mushkin HP-580AP (C/O TPU!)
Software Vista Ultimate (32-bit)
Sweet 450, that'll be fun...Checked the weather and it should be calm winds this weekend, so going to fly the crap outta the lama (lol llama heheh)...can't wait til tomorrow, going to skip out on work a tad early and give it a go

hopefully I don't break anything major before the weekend, then I'll be stuck with only the simulator :laugh:

I'll let ya know how it goes, I hear co-axials are the way to go for beginners. Not expecting anything besides hovering and a higher degree of control than the air hog 2-ch's.
 

Skitzo

New Member
Joined
Apr 3, 2008
Messages
720 (0.12/day)
I've been thinking I'd enjoy an RC electric boat. I talked with the owner of the local hobbyshop and he told me that kits arn't really available anymore. Most boats are made rtr. I really enjoy building and don't want to start that way. I'm interested in the deep-v and deep-v modified hulls uo 36". A few months ago I found a website for a company in California that makes some really nice aftermarket gear and offered some hulls. I've been unable to find the site again and was wondering if anyone knows of it?
 

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
I've been thinking I'd enjoy an RC electric boat. I talked with the owner of the local hobbyshop and he told me that kits arn't really available anymore. Most boats are made rtr. I really enjoy building and don't want to start that way. I'm interested in the deep-v and deep-v modified hulls uo 36". A few months ago I found a website for a company in California that makes some really nice aftermarket gear and offered some hulls. I've been unable to find the site again and was wondering if anyone knows of it?

just the first one I hit......http://www.funrcboats.com/category.aspx?categoryID=165

Also bring a fishing pole and about 2 ounces of sinkers, just in case something goes wrong while out in the water. Unless you have a boat to chase it!
 

Skitzo

New Member
Joined
Apr 3, 2008
Messages
720 (0.12/day)
Thanks, I appreciate it. i must be blind, I don't know how i can miss things sometimes. I need something for fly fishing, so I'm considering a float chair with an electric motor. I think it would work well for both applications.
 

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
I have to agree. The chair is a great idea.

I used to run a twin electric motored boat, was about 3 foot long. It was a blast chasing ducks and gulls with it, untill the batteries went dead...lol
 
Joined
Mar 5, 2007
Messages
1,372 (0.22/day)
Location
Chicago, IL
System Name Stealth 2 Duo Turbine
Processor Intel e6850 @ 3.8ghz
Motherboard Asus Striker Extreme
Cooling CoolerMaster V8 Modded With 2 white LED's & 100CFM fan
Memory OCZ DDR2 1066_ SLI Black-4GB
Video Card(s) 2xMSI 8800GT"s SLI
Storage <<HDD For OS>> 2x150GB_Western Digital Raptor_Raid 0. <<HDD For Storage>> 3 x 1TB
Display(s) ACER B273HU 27" LCD 2048x1152
Case Apex SuperCase_Custom 7 month Build
Audio Device(s) Striker Extreme Add-In Card HD-Audio
Power Supply EnerMax INFINITI 720watt
Software SE7VEN ULTIMATE 64bit
Benchmark Scores 3DMark01=NTTA, 3Dmark06=NTTA 3Dmark_Vantage=NTTA, Core Temp v0.99.5=28C

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
D

Deleted member 24505

Guest
coaxials are pretty good for beginners it seems.You just cant do banked turns,they just seem to turn level.As long as it is a proportonal control system,its pretty easy to get the hang of,just try to do small movements on the sticks.Its fun though. :)

Also on mine i have the blades slightly loose so if they hit anything thay are less likely to break.

Hey infrared,i found a place that sells small jets too,the real mccoy :)

Specification
Thrust: 120 N - 170 N
Weight: 1570 g
Diameter: 112 mm
Length incl. starter: 288 mm
Rotor speed: 30,000 - 123,000 rpm
Fuel consumption: 580 ml / min
Fuel type: Jet A1, kerosene, petroleum plus 5% turbineoil
Maintenance interval: 50 hours or 500 million revolutions
Unit Price: £2,895.00 (Incl. Vat):eek:
http://www.gliders.uk.com/products.asp?dept=12
 

Bytor

New Member
Joined
Jun 27, 2007
Messages
1,051 (0.17/day)
System Name "The Dark Spider"
Processor AMD Phenom 9850 @ 3.0
Motherboard Asus M3A79-T
Cooling Water: CPU and GPU's, 2 pumps, 2 BIX Rads, D-Tek Fuzion v1, 2 Swiftech MCW60
Memory 4 gigs Crucial Balistix Tracers (1066 @ 1256)
Video Card(s) Sapphire 4870x2
Storage WD SATA 640 Gig HDD
Display(s) Acer 24" beast...
Case Modded Rocketfish
Audio Device(s) Onboard (only use head phones)
Power Supply 700 watt
Software a bunch
Benchmark Scores 3D Mark 06: 9859 on 2-X1950 pro's Xfire 3D Mark 06: 12794 on 1-3870 3D Mark 06: 16484 Xfire
Looks like we need some Sailplanes in the thread..

I started flying RC in 1977 and started off on Sailplanes and never looked back. I did try a power plane for a summer along with my Soaring, but they didn't stay up that long and didn't fly that fast. And then you had the gunk on your hands and transmitter... yuck..

Mainly I fly Thermal Duration, but have flown some slope planes while stationed in Germany and also added a Discus launch glider (DLG) to the hanger.

The large white sailplane below is a Windsong and carries a Camera and Altimeter. I have flown her to 3740 ft AGL and took some great pic's with it inflt.

All of these sailplanes carry 6 servos and are controlled by JR 347 and 8103 radios...

Dodgson Designs Windsong and Camano



Camano being launched



Camano lined up for a spot landing in full crow config.



Me and my Cal. Condor



Condor on the winch..

 
Last edited:

Skitzo

New Member
Joined
Apr 3, 2008
Messages
720 (0.12/day)
the more i think about adding control rods to the plane, the less I want to. i put 3 drawings together real quick to explain what I'm thinking.
In the first pic, it demonstrates what it would look like if I just added an extra line. because the tail shaft isn't centered on the gear, control surface movements would not be equal
the second pic, i could add a piece of carbon fibre tube cut from the old fusalage and attach it to bring the enry point to center on the gear
the third pic, i could use a peice of rigid wire to elevate the lines

I think that the rigid wire would be better for balance but the tube would stand up to crashes better. If the wire bends, it could be a pain to straighten.

I still have all my busted parts so there are some materials here. The original fishing line had metal crimps at the gear end to hold it in place, they were replaced by fake salmon eggs cause well ... i had some lol. My goal is to not screw up the balance too bad so i dont have to use much weight to correct it.


Any thoughts?
 

Attachments

  • 2line.jpg
    2line.jpg
    3.3 KB · Views: 416
  • 2line2.jpg
    2line2.jpg
    10.5 KB · Views: 419
  • 2line3.jpg
    2line3.jpg
    10.4 KB · Views: 419
Last edited:
Joined
May 28, 2005
Messages
4,994 (0.73/day)
Location
South of England
System Name Box of Distraction
Processor Ryzen 7 1800X
Motherboard Crosshair VI Hero
Cooling Custom watercooling
Memory G.Skill TridentZ 2x8GB @ 3466MHz CL14 1T
Video Card(s) EVGA 1080Ti FE. WC'd & TDP limit increased to 360W.
Storage Samsung 960 Evo 500GB & WD Black 2TB storage drive.
Display(s) Asus ROG Swift PG278QR 27" 1440P 165hz Gsync
Case Phanteks Enthoo Pro M
Audio Device(s) Phillips Fidelio X2 headphones / basic Bose speakers
Power Supply EVGA Supernova 750W G3
Mouse Logitech G602
Keyboard Cherry MX Board 6.0 (mx red switches)
Software Win 10 & Linux Mint
Benchmark Scores https://hwbot.org/user/infrared
coaxials are pretty good for beginners it seems.You just cant do banked turns,they just seem to turn level.As long as it is a proportonal control system,its pretty easy to get the hang of,just try to do small movements on the sticks.Its fun though. :)

Also on mine i have the blades slightly loose so if they hit anything thay are less likely to break.

Hey infrared,i found a place that sells small jets too,the real mccoy :)

Specification
Thrust: 120 N - 170 N
Weight: 1570 g
Diameter: 112 mm
Length incl. starter: 288 mm
Rotor speed: 30,000 - 123,000 rpm
Fuel consumption: 580 ml / min
Fuel type: Jet A1, kerosene, petroleum plus 5% turbineoil
Maintenance interval: 50 hours or 500 million revolutions
Unit Price: £2,895.00 (Incl. Vat):eek:
http://www.gliders.uk.com/products.asp?dept=12

Yeah, jets are very cool! My mate Ed, the lodger (lives in my attic!!!) has a jet. (attached)

Uses a Wren 54.

Also, there's a pic I found from roughly 4 months back of my BadBoy. It's a Profile 3d plane powered by an OS 55AX. Plane got chucked because i hated the way it flew, the engine is now in a WestonUK Hype3D, basically a bigger version of the plane in my first post.

Passed my "B" certificate last week, so i can now fly at shows and comps, and I'm entering the British Freestyle Aerobatic Championships competition with THIS plane in August!! Mine is a Red and white color scheme tho. I'll get some pics of mine when i've got it looking presentable! Only just been repaired after a deadstick landing went wrong, and it's in need of re-covering!

EDIT:

Good stuff Bytor! Sailplanes are awesome! Was thinking of building a glider for this summer but never got round to it. Added to list!
 

Attachments

  • ed's jet.jpg
    ed's jet.jpg
    53.6 KB · Views: 457
  • Badboy.jpg
    Badboy.jpg
    31.2 KB · Views: 503
Last edited:

intel igent

New Member
Joined
Jun 5, 2005
Messages
4,640 (0.68/day)
Location
Toronto, Canada
System Name old school / new school
Processor 3.0e C0 @ 3.6 / e5200
Motherboard p4p800e-dlx / p5q-DLX
Cooling custom water see sig / air
Memory 2x1g oczPC4000EbPl / 2x2g ocz2rpr1066
Video Card(s) 3850AGP / 4890vaporX
Storage 36g raptor+120g wd / wd 1001fals 1tb
Display(s) BenQ / sharpAQUOS LC-37D64U
Case modded antec plusview / generic
Audio Device(s) audigy 2zs / ASUS Xonar HDAV1.3
Power Supply fan/cable modded powerstream 520 / OCZ 700mxsp
Software Xp pro SP2 / VISTA ultimate OEM
anyone know where i can find a traxxis revo 2.5rs in ontario, canada?

:toast:
 
Joined
May 28, 2005
Messages
4,994 (0.73/day)
Location
South of England
System Name Box of Distraction
Processor Ryzen 7 1800X
Motherboard Crosshair VI Hero
Cooling Custom watercooling
Memory G.Skill TridentZ 2x8GB @ 3466MHz CL14 1T
Video Card(s) EVGA 1080Ti FE. WC'd & TDP limit increased to 360W.
Storage Samsung 960 Evo 500GB & WD Black 2TB storage drive.
Display(s) Asus ROG Swift PG278QR 27" 1440P 165hz Gsync
Case Phanteks Enthoo Pro M
Audio Device(s) Phillips Fidelio X2 headphones / basic Bose speakers
Power Supply EVGA Supernova 750W G3
Mouse Logitech G602
Keyboard Cherry MX Board 6.0 (mx red switches)
Software Win 10 & Linux Mint
Benchmark Scores https://hwbot.org/user/infrared

intel igent

New Member
Joined
Jun 5, 2005
Messages
4,640 (0.68/day)
Location
Toronto, Canada
System Name old school / new school
Processor 3.0e C0 @ 3.6 / e5200
Motherboard p4p800e-dlx / p5q-DLX
Cooling custom water see sig / air
Memory 2x1g oczPC4000EbPl / 2x2g ocz2rpr1066
Video Card(s) 3850AGP / 4890vaporX
Storage 36g raptor+120g wd / wd 1001fals 1tb
Display(s) BenQ / sharpAQUOS LC-37D64U
Case modded antec plusview / generic
Audio Device(s) audigy 2zs / ASUS Xonar HDAV1.3
Power Supply fan/cable modded powerstream 520 / OCZ 700mxsp
Software Xp pro SP2 / VISTA ultimate OEM
thnx infrared but no luck :(

a friend of mine picked one up used a couple of week's ago and man the thing is a BLAST to drive!
 
Joined
Mar 5, 2007
Messages
1,372 (0.22/day)
Location
Chicago, IL
System Name Stealth 2 Duo Turbine
Processor Intel e6850 @ 3.8ghz
Motherboard Asus Striker Extreme
Cooling CoolerMaster V8 Modded With 2 white LED's & 100CFM fan
Memory OCZ DDR2 1066_ SLI Black-4GB
Video Card(s) 2xMSI 8800GT"s SLI
Storage <<HDD For OS>> 2x150GB_Western Digital Raptor_Raid 0. <<HDD For Storage>> 3 x 1TB
Display(s) ACER B273HU 27" LCD 2048x1152
Case Apex SuperCase_Custom 7 month Build
Audio Device(s) Striker Extreme Add-In Card HD-Audio
Power Supply EnerMax INFINITI 720watt
Software SE7VEN ULTIMATE 64bit
Benchmark Scores 3DMark01=NTTA, 3Dmark06=NTTA 3Dmark_Vantage=NTTA, Core Temp v0.99.5=28C

intel igent

New Member
Joined
Jun 5, 2005
Messages
4,640 (0.68/day)
Location
Toronto, Canada
System Name old school / new school
Processor 3.0e C0 @ 3.6 / e5200
Motherboard p4p800e-dlx / p5q-DLX
Cooling custom water see sig / air
Memory 2x1g oczPC4000EbPl / 2x2g ocz2rpr1066
Video Card(s) 3850AGP / 4890vaporX
Storage 36g raptor+120g wd / wd 1001fals 1tb
Display(s) BenQ / sharpAQUOS LC-37D64U
Case modded antec plusview / generic
Audio Device(s) audigy 2zs / ASUS Xonar HDAV1.3
Power Supply fan/cable modded powerstream 520 / OCZ 700mxsp
Software Xp pro SP2 / VISTA ultimate OEM

Mediocre

New Member
Joined
Jun 11, 2006
Messages
1,237 (0.19/day)
Processor C2D E8400 @ 3.60GHz
Motherboard ASUS P5Q-Pro w/ extra Vreg HS
Cooling Apogee GTX, 2x120mm DD, MCP-1000P Res/Pump, all 3/8" 7x80mm (4x push/pull, 2x exhaust, 1x side)
Memory 2 x 1GB Corsair Dominator DDR2 1066 @ 800 (4-3-3-6)
Video Card(s) EVGA 9800GTX+
Storage 3 x 80 GB WD SATA300 (2x RAID 0)
Display(s) Scepter x37 1080p 37" LCD & Samsung 204B
Case CoolerMaster HAF932
Audio Device(s) Onboard
Power Supply Mushkin HP-580AP (C/O TPU!)
Software Vista Ultimate (32-bit)
Crashed the Lama into the neighbors second story, had enough sense to cut power before stripping out the gears. Blew off the stabilizer bar, landing gear, and training set.
Tore it apart, the gears and shafts seem straight and un-damaged, the only apparent damage was three of the four rotor blades. Two of them had sliced edges and the third lost 3/4" from the tip.

So I'm out of spare blades, thought I read on a heli forum you could cut the tips off broken blades? If the two (on the same plane) are the same length it'll work?

If I can't 'shorten' the blades I'll have to be careful until Thurs when my spares get in.

Any thoughts on shortening the blades?

:toast:
 

aximbigfan

New Member
Joined
Oct 15, 2006
Messages
847 (0.13/day)
Location
St. Louis, MO
System Name QUAD1
Processor Intel Core i7 920
Motherboard Asus P6T SE
Cooling XIGMATEK HDT-S963
Memory OCZ 3 X 1GB Triple Channel
Video Card(s) HIS Radeon HD4670 IceQ
Storage Seagate 250GB 7200RPM SATA
Display(s) Acer AL1916W 19" Widescreen LCD
Case CM Storm Scout
Audio Device(s) Onboard
Power Supply Corsair 520 Watt
Software Windows XP Pro
I'm in!

Blade CP (under construction)
X-UFO
PT-40 (oldschool version)
.049 motor glider
Many, many other experimental VTOL designs.....

Chris
 

Skitzo

New Member
Joined
Apr 3, 2008
Messages
720 (0.12/day)
...

Hi all

I just picked up an new rc, first nitro is a T-Maxx 2.5. :rockout:

http://www.hobbytron.com/traxxas-t-maxx.html

The anticipation during breakin was killing me so ... yeah :) I almost made 8 tanks before I now have to do my first repairs. Streering doesn't seem to work so well anymore, the aircleaner plugs too fast, and I'm considering a digital temp tunning unit. There are lots of parts avail for this truck so this should be fun:)
Anyone have any tips or advice they'd like to share?
 

Attachments

  • tmaxx.JPG
    tmaxx.JPG
    47.8 KB · Views: 449

intel igent

New Member
Joined
Jun 5, 2005
Messages
4,640 (0.68/day)
Location
Toronto, Canada
System Name old school / new school
Processor 3.0e C0 @ 3.6 / e5200
Motherboard p4p800e-dlx / p5q-DLX
Cooling custom water see sig / air
Memory 2x1g oczPC4000EbPl / 2x2g ocz2rpr1066
Video Card(s) 3850AGP / 4890vaporX
Storage 36g raptor+120g wd / wd 1001fals 1tb
Display(s) BenQ / sharpAQUOS LC-37D64U
Case modded antec plusview / generic
Audio Device(s) audigy 2zs / ASUS Xonar HDAV1.3
Power Supply fan/cable modded powerstream 520 / OCZ 700mxsp
Software Xp pro SP2 / VISTA ultimate OEM
how you likin' your Tmaxx? you got it new RTR? did you order or was it local?

i missed a great deal on a REVO 3.3 over the weekend cuz i was at the track :eek:

now i'm back in town and on a hunt :pimp:

:toast:
 
Joined
May 31, 2007
Messages
1,051 (0.17/day)
Location
Port Fairy, Victoria, Australia
System Name Rampage 3.0
Processor i7 3770K 4.2Ghz
Motherboard ASRock Z77 Extreme 4
Cooling Corsair 110 (280mm rad)
Memory 16GB G.Skill Sniper F3-1866 10-11-10 CR1
Video Card(s) 2 X gigabyte 7970 ghz edition @1100mhz / 6000mhz
Storage samsung 500 GB + 128GM crucial M4 ssd
Display(s) LG IPS235P 23in IPS 1080p
Case corsair vengance c70 - white
Audio Device(s) On Board
Power Supply Corsair HX-750w
Software Windows 7 Ultimate 64 bit
i have had a few RC's im my time 2 buggies, 2 planes, 1 boat, 1 chopper, and also flown a mates glider a few times, the chopper and 1 plane are only small electric ones but still fun, when i was younger i built a trainer plane with a .40 engin in it and had a bad first flight i dont think i will be doing that again, i flew it on our farm, and got it in the air after almost nose diving it 3 times, started to bank around to the right and i dont know how but i know how but i knoecked the aleron trim and was fighting to keep it from rolling to the right even more, just missed the roof of the house and then it flew over the road (trust me i didnt want it too) and way too low it just missed the cab of a truck and fair wedged its self up a tree, the plane is fine with only 2 small dints the the leading edge of the wing... but from now on i think i will stick to things with wheels

my mates also recored all of this to dvd pluss the other stupid things i have done (sand boarding, bmxing down sand dunes, rockets and many other things. i think it should be called rampage gone wrong..lol)
 

Lillebror

New Member
Joined
Jul 28, 2007
Messages
719 (0.12/day)
Location
Denmark
Processor Intel Core2Duo e8400 @ 3.6ghz
Motherboard Asus P5Q Pro w/ mBios
Cooling Xigmatec something with a orange fan
Memory Kingston HyperX 4 gig
Video Card(s) Sapphire hd4870
Storage 320 gb Maxtor 750gb samsung f11 250gb hitachi
Display(s) IIyama e1900s
Case CoolerMaster Ammo
Audio Device(s) Asus Xonar D2/PM Pci
Power Supply Corsair 750w
Software Windows 7 x64
I got myself a esky honey bee cp2. Im a total newb to rc stuff, so i already crashed it :D just as i found out how to hover 30cm over the ground, a wind came and took my heli into a tree.. Both wings got smashed and my servo's are trashed :\ getting some replacements friday :) Should i order a simulator thingy for the computer? cause its really hard to fly.. or maybe i just havent tweaked it as i should :D
 

Skitzo

New Member
Joined
Apr 3, 2008
Messages
720 (0.12/day)
how you likin' your Tmaxx? you got it new RTR? did you order or was it local?

i missed a great deal on a REVO 3.3 over the weekend cuz i was at the track :eek:

now i'm back in town and on a hunt :pimp:

:toast:


:rockout: It's great!, would buy it again. Yeah it was RTR

i told the guy at the hobby store I wanted everything I needed to play that day. I know it was an invite to sell me what i don't need but he seemed to do ok. truck cost me $299 plus all the extras. So far I'm happy. Did I pay too much?
 
Top