• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Realtek DCH Modded Audio Driver for Windows 10

Joined
Aug 10, 2019
Messages
30 (0.06/day)
I confirm that it works. Now Nahimic only doesn't work. But it is ok until the next update that works well
great news, and 'bout the nahimic yes it doesn't work as expected so I disabled it and enable only Sound blaster connect 720 to equalize the sound and upscale to 5.1, that's enough for me until a new driver fix this issue

I also encountered the same problem, 5.1 channel was not executed correctly, now I also use 6.0.8996.1, and it works fine


I also encountered the same problem, 5.1 channel was not executed correctly, now I also use 6.0.8996.1, and it works fine
great so I think the 6.0.8996.1 version is the best till now :rockout:
 

Pr3nd3r

New Member
Joined
Sep 28, 2020
Messages
1 (0.02/day)
Hey guys, so I'm not sure what the go is, bit out of my depths unfortunately.

I've spent the past week or more trying to find an audio driver for an old PC I have lying around. The motherboard is a Gigabyte AM3 GA-MA790XT-UD4P. Onboard audio is ALC889A. Running Windows 10. After lot of stuffing around I've only managed to get audio to work from the front panel jack, but it sounds somewhat distorted. In the Realtek HD Manager, the rear panel is always greyed out, and nothing I've done has changed that. I'm sure that back when I had Windows 7 installed, the audio was perfectly fine. Unfortunately, going back to Windows 7 is no longer an option. I've tried many different Realtek drivers which have been very hit and miss.

Can anybody steer me in the right direction, as to what drivers here may offer a solution? It'd be greatly appreciated. Cheers.
 
Joined
Jul 30, 2018
Messages
62 (0.07/day)
Hey ! I appreciate all the work and it really saves me from buying more expensive stuff. I tried to run the shortcut on desktop and the file I circled in black is flashing red. What is it ? and does require fixing ?

Clicked on the red X and it turned green but if I save it turns red again ? Not sure what it is ... I'm not trying to be iliterate when it comes to this but the shortcut was placed on my desktop and I believe I should run/try it :)

1.png
 
Last edited:
Joined
Sep 13, 2020
Messages
54 (0.68/day)
System Name Desktop
Processor AMD Ryzen 7 2700X (H²O)
Motherboard ASRock X470 Taichi
Cooling NZXT X61 + 2x PH-F140XP | NZXT X41 + PH-F140XP
Memory G.Skill 32 GiB DDR4@3200 CL14
Video Card(s) MSI RX 5700 XT (H²O)
Storage Crucial MX200 250GB, SEC 970 Evo 1TB
Display(s) LG 37LV5590
Case Phanteks Enthoo Luxe
Audio Device(s) ALC1220, UR44
Power Supply BeQuiet! SP E10 700W
Mouse DM1 FPS
Keyboard Cherry RS 6000M
Software Kubuntu | Win10
@bernek2018
This is a tweak tool for configurate the driver after install, but I don't know how to use.
If you wanna know how to use, please read this thread or do a search here & in other similar threads.

The RTKHDAUDIO.DAT is the file, where the config for Realtek audio devices is stored.
The other seems to be for Creative SB or Intel? I don't know.
I think: if red = data in it, if green = no data stored.

@Pr3nd3r
Deinstall all Realtek audio drivers and Tools and reboot.
Alternatively go into devicemanager and the properties of the Realtek HD Audio device -> driver -> push previous driver!
Then you'll have the M$ driver ... and hopefully good sound again.

Second step could be, that you could install the DCH driver from Alan Finote:
AAFAudioPackDCHFix-6.0.8996.1.exe

This is the last one, which has correct 5.1 surround sound via SPDIF.
 

TheMonkeyKing

New Member
Joined
Sep 28, 2020
Messages
1 (0.02/day)
Release killed my Win10; system would not reboot fully - hung on rotating circle black screen. Used most recent exe (6.0.9018.1)

However...
I tried installing it in an account that was not the Administrator. Even though I ran the file as an Administrator, there might be some issues with running it outside of an Admin profile. Yes, developer mode is ON.
I will try and install it in the Admin profile. Wish me luck!

RIG
Ryzen 7 2700x
MSi x470 Gaming Pro Carbon (Realtk ALC1220)
Nitro+ RX580 (AMD Video)
32 GB Ram
 
Last edited:
Joined
Sep 13, 2020
Messages
54 (0.68/day)
System Name Desktop
Processor AMD Ryzen 7 2700X (H²O)
Motherboard ASRock X470 Taichi
Cooling NZXT X61 + 2x PH-F140XP | NZXT X41 + PH-F140XP
Memory G.Skill 32 GiB DDR4@3200 CL14
Video Card(s) MSI RX 5700 XT (H²O)
Storage Crucial MX200 250GB, SEC 970 Evo 1TB
Display(s) LG 37LV5590
Case Phanteks Enthoo Luxe
Audio Device(s) ALC1220, UR44
Power Supply BeQuiet! SP E10 700W
Mouse DM1 FPS
Keyboard Cherry RS 6000M
Software Kubuntu | Win10
And de-install all Realtek drivers (with restart PC) before installing DCH driver.
Good luck!

And when installing be aware of that, what Alan said.
No. You must choose only one of the enhancements available in the package (Sound Blaster, A-Volute or Dolby Atmos).
 

TechJeff

New Member
Joined
Sep 11, 2020
Messages
19 (0.23/day)
Just wanted to tell you
When i install newest drivers AAFAudioPackDCH-6.0.9018.1 ... i got no sound over my Realtek Digital Out SPDIF to 5.1 system
With AAFAudioPackDCH-6.0.9013.1 all works fine and i even can select DTS and DD and it works ->
 

DriVE654

New Member
Joined
May 13, 2020
Messages
14 (0.07/day)
Hello @Alan Finote, as always, appreciate your hard work and willingness to improve!
I've read a few pages ago that you're working on a future version of HDMI-based driver. I wonder if there's a principal difference between Intel/Realtek onboard implementations and video card-based HDMI audio driver? As I understand, HDMI is not an audio device in itself, there's no "audio chip" as such (compared to Creative etc.) but just a plain PCM bitstream straight from MS audio processing software to a receiving endpoint (usually AVR or TV). How difficult is it to make the same tweaked driver for AMD and NVidia?
As I see from the recent discussions, what interests people here is to have a stable solution with minimal cabling (single SPDIF or HDMI instead of a "serpent wedding" behind the rig) and properly working upmix of 2.0 to 5.1 - and your solution with HDMI seems a "one-fits-all" option given it contains a (couple of) slot(s) for APO processing units that can perform upmixing and DD/DTS encoding if needed (plus some bells'n'whistles if someone desperately wants it).
 
Joined
Sep 13, 2020
Messages
54 (0.68/day)
System Name Desktop
Processor AMD Ryzen 7 2700X (H²O)
Motherboard ASRock X470 Taichi
Cooling NZXT X61 + 2x PH-F140XP | NZXT X41 + PH-F140XP
Memory G.Skill 32 GiB DDR4@3200 CL14
Video Card(s) MSI RX 5700 XT (H²O)
Storage Crucial MX200 250GB, SEC 970 Evo 1TB
Display(s) LG 37LV5590
Case Phanteks Enthoo Luxe
Audio Device(s) ALC1220, UR44
Power Supply BeQuiet! SP E10 700W
Mouse DM1 FPS
Keyboard Cherry RS 6000M
Software Kubuntu | Win10
@DriVE654
You could try it yourself by installing this DCH driver AAFAudioPackDCH-6.0.9013.1 (I get BSOD too) Edit: Dolby Home Theater v4 (DHT4) for analogue / SPDIF output devices ...

... and after restart you install via device manager for your graphics card HDMI output device (AMD or nVidia).

[ picture canceled by myself ]

So it should do install, but I don't know if DDL / DTS-C ist working fine.
If you tried, please give feedback of your experience & result.
 
Last edited:
Joined
Aug 15, 2020
Messages
64 (0.59/day)
DOWNLOAD MY DRIVERS FROM HERE:
DCH-UAD VERSION

STANDARD VERSION: (ARCHIVED) (LINK HERE)

DCH DRIVER VERSION UPDATED TO 6.0.9018.1
HDA PANEL INCLUDED IN DCH DRIVER

ATTENTION: If the Sound Blaster, if installed, is unable to detect your audio device correctly, the executable that will allow you to restore this operation is attached.


View attachment 168055

  • REALTEK DEFAULT EFFECTS
  • CREATIVE SOUND BLASTER X-Fi MB5
  • REALTEK DEFAULT EFFECTS
  • CREATIVE SOUND BLASTER X-Fi MB5
  • ASIO EXTRA
  • REALTEK DEFAULT EFFECTS
  • REALTEK DEFAULT EFFECTS WITH DDL/DTS
  • CREATIVE SOUND BLASTER CONNECT 2 (LEGACY)
    • 360°
    • 720°
  • NAHIMIC 3
  • SONIC STUDIO 3 (ASUS ROG)
  • SONIC RADAR 3 SUPPORTED
  • DOLBY ATMOS
  • DOLBY DIGITAL (OVERRIDE)
  • DTS INTERACTIVE (OVERRIDE)
  • REALTEK ASIO
  • REALTEK DEFAULT EFFECTS WITH DOLBY DIGITAL LIVE & DTS INTERACTIVE
  • CREATIVE SOUND BLASTER CONNECT (UWP)
    • 360°
    • 720°
    • CINEMA 5
  • NAHIMIC 3 (APO v3)
  • SONIC STUDIO 3 (ASUS ROG) (APO v3)
  • SONIC RADAR 3 SUPPORTED
  • DOLBY ATMOS
  • DOLBY ACCESS OEM
IMAGES (WINDOWS 10)
CREATIVE PANEL (LEGACY)
View attachment 145072
REALTEK AUDIO CONSOLE (UWP)
View attachment 159335
View attachment 159540

CREATIVE PANEL (UWP)
View attachment 158671
NAHIMIC 3
View attachment 133729

SONIC STUDIO 3 (ASUS ROG)
View attachment 156931

View attachment 156932

View attachment 156933


SCOUT RADAR 3 (NOT INCLUDED, BUT SUPPORT ENABLED)
View attachment 156935

View attachment 156936

DOLBY ATMOS
View attachment 143507

ENJOY !!!
[/引用]

This is a screenshot of my installation. The current problem is testing no sound on speakers 7.1 and 5.1.
1 and 2 modes cannot be switched,which will cause the cause the computer blue screen!
sshot-7.png

sshot-1.png
sshot-2.png
sshot-3.png
sshot-4.png
sshot-5.png
sshot-6.png
 
Joined
Sep 13, 2020
Messages
54 (0.68/day)
System Name Desktop
Processor AMD Ryzen 7 2700X (H²O)
Motherboard ASRock X470 Taichi
Cooling NZXT X61 + 2x PH-F140XP | NZXT X41 + PH-F140XP
Memory G.Skill 32 GiB DDR4@3200 CL14
Video Card(s) MSI RX 5700 XT (H²O)
Storage Crucial MX200 250GB, SEC 970 Evo 1TB
Display(s) LG 37LV5590
Case Phanteks Enthoo Luxe
Audio Device(s) ALC1220, UR44
Power Supply BeQuiet! SP E10 700W
Mouse DM1 FPS
Keyboard Cherry RS 6000M
Software Kubuntu | Win10
I will try and install it in the Admin profile. Wish me luck!
Maybe that's not good idea. Using Administrator profile for user usage is not good usable ( :laugh: useful usage of word "use" ).
This could make problems in certain situations.

You could try these ways ...
You need one of the drivers download from 1rst page: For Win7/8.x/(earlier)10 version take this ... and for (latest) Win10 take this.
Before installing, delete old audio drivers p.e. with driver_store_explorer with admin rights & force deleting ... and restart pc.
  1. You could do one or two restarts to be sure Realtek driver (de-)installation will be really finished.
  2. Use DriverStoreExplorer (start with admin rights) to delete driver rests & force deinstallation when error comes.
  3. Restart PC into Windows 10 without internet connection.
  4. Install DCH driver. Check driver installation. If wasn't succsessful use "start as administrator" to install driver.
  5. Restart PC and check again if driver is "DCH Optimus". If yes, then activate internet connection. If not, go to 2.
  6. If Windows overwrites the DCH driver, go to device manager and "revert back to last driver".
  7. Alternatively if 5. fails, use 7-zip Edit: "innosetup unpacker" to unpack driver in a folder of your choice & update driver via device manager from this folder.
Good luck!
 
Joined
Dec 13, 2014
Messages
279 (0.13/day)
Processor AMD Phenom II X4 925
Motherboard Gigabyte GA-78LMT-USB3 R2
Memory 4 GB DDR3 1333Mhz
Audio Device(s) onboard Realtek ALC892
Power Supply Seasonic S12II 620w (SS-620GB)
Software Windows 10 Education v1809
How did you manage to get Dolby software component 3.20700.725.0, I couldn't find it on MS Update Catalog?
it's there on MS Catalog recently but it's not 3.20700.725.0 but 3.20702.725.0

Release killed my Win10; system would not reboot fully - hung on rotating circle black screen. Used most recent exe (6.0.9018.1)

However...
I tried installing it in an account that was not the Administrator. Even though I ran the file as an Administrator, there might be some issues with running it outside of an Admin profile. Yes, developer mode is ON.
I will try and install it in the Admin profile. Wish me luck!

RIG
Ryzen 7 2700x
MSi x470 Gaming Pro Carbon (Realtk ALC1220)
Nitro+ RX580 (AMD Video)
32 GB Ram
people using certain MSI boards were having problems with the official 9013 Realtek UAD MSI drivers and so MSI has recently "downgraded" the Realtek UAD drivers to 8945.1 on their web site.

seem there's a problem with driver 6.0.9013.1 now, you will probably have to wait a bit for new driver release. Currently, only 6.0.8945.1 version is listed on MSI website.
don't use the 9013 driver whether official from MSI or the AAF DCH modded one if using recent MSI motherboards.
perhaps try the 9030 AAF DCH version on those boards
 
Last edited:
Joined
May 20, 2018
Messages
125 (0.13/day)
Location
Germany
System Name Metal-Tom-PC
Processor AMD Ryzen 5 2600x
Motherboard ASUS ROG Crosshair VI Extreme
Cooling Boxed
Memory Mushkin DDR4 16 GB
Video Card(s) ASUS RX560 4GB
Storage 1x M2-SSD @256GB/1x Intenso SATA-SSD @120GB/1x Intenso SATA-SSD @240GB/2x WD10EZRX @1TB/1,5 TB HDD
Display(s) 1x Samsung LE40F86BDX (TV)/1x Samsung SyncMaster T240
Case Thermaltake Kandalf LCS
Audio Device(s) Realtek ALC1220A
Power Supply SeaSonic Focus Plus Gold 80+ 750W
Mouse Logitech M210
Keyboard Logitech K260
Software Win 10 Pro x64 v20H2
@DriVE654
You could try it yourself by installing this DCH driver AAFAudioPackDCH-6.0.9013.1 for analogue / SPDIF output devices ...

... and after restart you install via device manager for your graphics card HDMI output device (AMD or nVidia).

View attachment 170087

So it should do install, but I don't know if DDL / DTS-C ist working fine.
If you tried, please give feedback of your experience & result.
I've tried it on 6.0.9018.1, with a BSOD as Result, and I must roll back to the previous HDMI-Driver
 
Joined
Sep 13, 2020
Messages
54 (0.68/day)
System Name Desktop
Processor AMD Ryzen 7 2700X (H²O)
Motherboard ASRock X470 Taichi
Cooling NZXT X61 + 2x PH-F140XP | NZXT X41 + PH-F140XP
Memory G.Skill 32 GiB DDR4@3200 CL14
Video Card(s) MSI RX 5700 XT (H²O)
Storage Crucial MX200 250GB, SEC 970 Evo 1TB
Display(s) LG 37LV5590
Case Phanteks Enthoo Luxe
Audio Device(s) ALC1220, UR44
Power Supply BeQuiet! SP E10 700W
Mouse DM1 FPS
Keyboard Cherry RS 6000M
Software Kubuntu | Win10
Sorry, then maybe I did it on Win7 with (this AAFHDAudioPack-6.0.8960.1 -> I got B.S.O.D too) Edit: Dolby Home Theater v4 driver & it works.

DHT4 driver for HDMI.png


DHT4 driver for HDMI working.png


That should also be possible on Win10 I think. But you could also use Dolby Atmos (or Nahimic?).


I hope Alan will find a way to make it working for HDMI in a future release.
 
Last edited:

Cardepils

New Member
Joined
Aug 27, 2020
Messages
15 (0.16/day)
I've managed to install realtekdriver_2019_02_25 @Alan Finote but i have some question, im using 7.1 but when I tested the speakers, the sound just came out of the front left and right. i've set the cable input im using rca cable, do you know the solution?

View attachment 170237

Thankyou
 
Joined
Sep 13, 2020
Messages
54 (0.68/day)
System Name Desktop
Processor AMD Ryzen 7 2700X (H²O)
Motherboard ASRock X470 Taichi
Cooling NZXT X61 + 2x PH-F140XP | NZXT X41 + PH-F140XP
Memory G.Skill 32 GiB DDR4@3200 CL14
Video Card(s) MSI RX 5700 XT (H²O)
Storage Crucial MX200 250GB, SEC 970 Evo 1TB
Display(s) LG 37LV5590
Case Phanteks Enthoo Luxe
Audio Device(s) ALC1220, UR44
Power Supply BeQuiet! SP E10 700W
Mouse DM1 FPS
Keyboard Cherry RS 6000M
Software Kubuntu | Win10
Last edited:

Cardepils

New Member
Joined
Aug 27, 2020
Messages
15 (0.16/day)
@Cardepils
Use AAFAudioPackDCH-6.0.9013.1.exe (or AAFAudioPackDCHFix-6.0.8996.1.exe), they work correctly with 5.1 via SPDIF.
7.1 could not work via SPDIF, maximum is 5.1. On analogue output 7.1 is possible.

For audio testing here are two sources: Dolby Surround 5.1 (720p25) file ... and 5.1 PCM/.WAV audio files.
i already tested all alan driver, but i like realtekdriver_2019_02_25 and realtek_2019_03 because the sound is good. btw im not using SPDIF im using analogue. thank for the response @Tanzmusikus
so do you know how to solve my issue?
 
Joined
Aug 15, 2020
Messages
64 (0.59/day)
[QUOTE =“ Cardepils,帖子:4359586,成员:201268”]
我已经测试了所有的alan驱动程序,但是我喜欢realtekdriver_2019_02_25和realtek_2019_03,因为声音很好。顺便说一句,即时通讯不使用SPDIF即时通讯使用模拟。感谢您的回复[USER = 201860] @Tanzmusikus [/ USER]
那么您知道如何解决我的问题吗?
[/引用]

[realtekdriver_2019_03 The horn will burst at 50%,notas stable as Alan's drive!
 
Joined
Feb 14, 2013
Messages
40 (0.01/day)
Location
Terra Prime / Brasil
System Name My Gamer PC
Processor AMD Ryzen 7 3700X
Motherboard ASUS TUF Gaming B550-Plus
Cooling Scythe Mugen 5 TUF
Memory 16GB Crucial Ballistix SportLT 3200MHz CL16
Video Card(s) ZOTAC Geforce RTX 2080 AMP!
Storage SSD Samsung 860 EVO 500GB
Display(s) Samsung UHD 4K 28" 60Hz DisplayPort 1.2
Case AeroCool Aero-1000 White
Audio Device(s) JVC RX-6008V Audio Receiver Dolby/DTS with S-PDIF
Power Supply Corsair TX850 v2 850W single rail
Mouse Logitech G203 Lightsync Gaming Mouse
Keyboard Thermaltake TteSports Knucker
Software Windows 10 Pro

tasos.chan

New Member
Joined
Sep 7, 2019
Messages
9 (0.02/day)
Joined
Aug 15, 2020
Messages
64 (0.59/day)
[QUOTE =“ Alan Finote,帖子:3997917,成员:170292”]
发布了新的REALTEK驱动器机架
版本更新为6.0.1.8633
[SPOILER =“增强和新闻列表:”]
新增:华硕自定义控制面板
新:DTS在实时数字界面中交互(独立)
新增:在REALTEK模拟接口中的DTS UltraPC II(仅支持立体声模式或耳机)
杜比数字+(仅在REALTEK模拟接口中)
杜比家庭影院v4(PCEEv4)
杜比全景声(Dolby Atmos)游戏
A-VOLUME NAHIMIC 3
华硕耳机放大器预设

[/ SPOILER]
[SPOILER =“ FIXES”]
固定多通道模式(5.1; 7.1)
[/ SPOILER]
链接下载
好度假村!!!

View attachment 116895
[/引用]
Unable to download
 
Joined
Sep 13, 2020
Messages
54 (0.68/day)
System Name Desktop
Processor AMD Ryzen 7 2700X (H²O)
Motherboard ASRock X470 Taichi
Cooling NZXT X61 + 2x PH-F140XP | NZXT X41 + PH-F140XP
Memory G.Skill 32 GiB DDR4@3200 CL14
Video Card(s) MSI RX 5700 XT (H²O)
Storage Crucial MX200 250GB, SEC 970 Evo 1TB
Display(s) LG 37LV5590
Case Phanteks Enthoo Luxe
Audio Device(s) ALC1220, UR44
Power Supply BeQuiet! SP E10 700W
Mouse DM1 FPS
Keyboard Cherry RS 6000M
Software Kubuntu | Win10
@Cardepils
1. Did you set "Analogue Output" as your default device in Windows?

2. Try this output configuration:
green -> front L+R
orange -> center | sub
black -> rear surround L+R
blue -> side surround L+R (instead "line in")
pink -> don't use "mic in" for sound output

3. Deactivate both effects -> [DTS Connect] and [DTS Ultra PC II].

4. If that still not function properly, then plz post your motherboard model.

5. Do you use 3 adapters from 3.5" jack to RCA (cinch) or what?

6. Which device gets the 7.1 signal (Logitech ???, AVR, ...)?
 
Last edited:

Cardepils

New Member
Joined
Aug 27, 2020
Messages
15 (0.16/day)
@Cardepils
1. Did you set "Analogue Output" as your default device in Windows?

2. Try this output configuration:
green -> front L+R
orange -> center | sub
black -> rear surround L+R
blue -> side surround L+R (instead "line in")
pink -> don't use "mic in" for sound output

3. Deactivate both effects -> [DTS Connect] and [DTS Ultra PC II].

4. If that still not function properly, then plz post your motherboard model.

5. Do you use 3 adapters from 3.5" jack to RCA (cinch) or what?

6. Which device gets the 7.1 signal (Logitech ???, AVR, ...)?
@Tanzmusikus

1. Yap i set analogue is default device on my windows

2. Already set that

3. Done

4. My motherboard is gigabyte b85m-ds3h-a (ALC 887)

5. Ya im using 3.5" Jack to rca

6. No im not using any receiver
 
Last edited:
Joined
Aug 15, 2020
Messages
64 (0.59/day)
[QUOTE =“ Alan Finote,帖子:3974997,成员:170292”]
我会尝试包括在内。

新的Realtek音频驱动程序发布
[SPOILER =“资源”]
  • 驱动程序更新版本为6.0.1.8603
  • 支持记录24位
  • Sound BlasterX 720°
  • 三星声音活着
  • Realtek / Vienna SounzReal新用户界面
  • Realtek / Vienna VoizReal新用户界面
  • Realtek ASIO驱动程序
  • 杜比数字直播
  • DTS互动
  • 新增:在所有端点(模拟,SPDIF,HDMI等)中均启用了杜比调整和配置文件创建器的杜比PCEEv4 APO
[/ SPOILER]
[SPOILER =“下载链接”]
这里(MediaFire)
[/ SPOILER]

[SPOILER =“图像(单击以展开)”]
View attachment 114452
View attachment 114453
View attachment 114454
View attachment 114455
View attachment 114458
View attachment 114459
View attachment 114460
View attachment 114461
View attachment 114462
View attachment 114463
[/ SPOILER]
适合所有用户的度假胜地
[/引用]Download link can fail! Iprefer the old driver , can you provide a download?

NEW REALTEK DRIVERPACKS RELEASED
UPDATED VERSION TO 6.0.1.8633
NEW: ASUS CUSTOM CONTROL PANEL
NEW: DTS INTERACTIVE IN REALTEK DIGITAL INTERFACE (INDEPENDENT)
NEW: DTS UltraPC II IN REALTEK ANALOG INTERFACE (ONLY SUPPORT STEREO MODE OR HEADPHONES)
DOLBY DIGITAL PLUS (ONLY IN REALTEK ANALOG INTERFACE)
DOLBY HOME THEATER v4 (PCEEv4)
DOLBY ATMOS FOR GAMING
A-VOLUTE NAHIMIC 3
ASUS HEADPHONE AMPLIFIER PRESETS
FIXED MULTICHANNEL MODE (5.1; 7.1)
LINK TO DOWNLOAD
GOOD RESORT!!!

View attachment 116895
I like this old driver, but the download link is invalid. Could you please provide it again? Htank you!

I
 

Cardepils

New Member
Joined
Aug 27, 2020
Messages
15 (0.16/day)
Here i got this from @Jimmy9303 :

(RealtekDriver_2019_02_25)
http://www.mediafire.com/file/crlpuwd5cj0hj6o/RealtekDriver_2019_02_25.exe/file

(RealtekDriver_2019_03)

if you success with that driver on 7.1 tell me please, because i do not have any error when im installed, my issue is only front right and left can produce the sound. even when already set the output to 7.1 speaker on 3.5mm jack
 
Top