Realtek Modded Audio Driver for Windows 10/11 - Only for HDAUDIO

[Bryan Ü]

Do you know if there is a way to extract Dolby's drivers from the latest pack in order to be able to update Dolby Atmos app but keep the legacy Realtek drivers?

if you want to extract alan's driver use innoextractor

 

[Maksim999]

Do you know if there is a way to extract Dolby's drivers from the latest pack in order to be able to update Dolby Atmos app but keep the legacy Realtek drivers?

Did you manage to extract Dolby audio with drivers from the shared installer?

 

[Ferather]

Message Alan, he should give them to you if you dont want to use the extractor on his installer.

 

[Credelle]

I got a kguss dac k3, it uses the SPDIF Interface driver, will it work?

 

[AAF Optimus]

I got a kguss dac k3, it uses the SPDIF Interface driver, will it work?

No.

 

[poppy101]

Hi,
I'm trying to use this on an Asus Tuf Gaming X570 Pro which comes with the Realtek ALC S1200A and a crippled "DTS Custom" software. I uninstalled the existing drivers and DTS software, used the Driver Store software to remove any remnants (there were none), deleted further traces as per @Zonder's post above, then installed AAF. DTS does not work, it thinks there are no speakers or headphones conncted even when they are. The DTS Sound Unbound UWP app is also unlicensed and asking me to register for a 14 day trial.

 

[TheDoctorTash]

Dear Alan Finotty! Please add the 5.1 sound support for hardware HDAUDIO\FUNC_01&VEN_10EC&DEV_0892&SUBSYS_10EC0892&REV_1003.
In browser MozillaFirefox, the sound is played in 2.0 format, also the SoundBlasterConnect does not see the audio device.
Also KGAConfig report the error 7B when select Sound Blaster 360.

Solved! I reinstall the AAFAudioPackDCH. With the installer i select Realtek HD Audio Manager, then intall the mod. After installing i run KGAConfig.exe without any errors!
In the Realtek HD Audio Manager i select Effect: living room. After this, sound 5.1 working on any software! Thanks again @Alan Finotty

 

[Xanbec]

Hi! First of all congratulations for this AWESOME work.

In order to have the spatial sound enabled (DTS or Atmos) it is needed to pay a subscription or is there a tweak within the settings?

 

[AAF Optimus]

Hi! First of all congratulations for this AWESOME work.

In order to have the spatial sound enabled (DTS or Atmos) it is needed to pay a subscription or is there a tweak within the settings?

Spatial sound formats DTS: X Ultra and DTS Headphone: X available in this package.

 

[Zonder]

Hello everyone. Today I updated the old version of Alan's mod on my wife's computer. All according to the previously described algorithm. Everything got up right away normally. The chip is slightly older - 887. It was delivered and only 5.1 was available. I entered the code (previously posted) - rebooted and became 7.1. I entered and the equalizer appeared. Sound Blaster-behaved correctly - in 7.1. Ultra X works-everything is active. Unbound-the spouse has never stood before. Yes, it asks you to either buy or activate the demo mode for 14 days - YOU DO NOT NEED TO DO ANYTHING - It is used as a pad for Ultra X operation. And finally updated the preset from Ferather. Everything is fine - the sound is fantastic! So you're doing something wrong...

 

[AAF Optimus]

NEW DCH DRIVERS RELEASED IN GITHUB
DCH DRIVER VERSION UPDATED TO 6.0.9159.1
MORE DETAILS IN GITHUB

WARNING: There is also an update for Nahimic on the Microsoft Store to version 1.5.4.0, but it is very likely that once installed, your enhancement will stop working.

ATTENTION 1: You will need to uninstall the currently installed version before continuing with this installation. A condition has been imposed for this due to problems reported by some users.

RECOMMENDATION: Before installing this modified driver, be sure to remove any and all residues from previous Realtek audio drivers or even if there are residues from previous versions of my mods, if they persist. For this you will need the DriverStoreExplorer (by @lostindark). Remove any drivers whose vendor is "Realtek", "Dolby", "DTS", "Creative" or "Alan Finotty" in the Sound, Video and Game Controllers, Extensions and Software Components categories.

Those who want only Realtek material, just choose the panel option (HDA or UAD), select your decoder and deselect the rest.

If Dolby Atmos again insists not to install, here are the packages for installation.

GO TO 1st PAGE

ENJOY!!!

 

[Jorgeapp]

just in case... someone can make an auto uninstaller/cleaner via cmd or something? for example "amdcleanuputility.exe" which help a lot to fully remove the amd drivers and clean the pc of any traces when someone need to do a clean installation gpu drivers... thanks! ♥

Also, just lucky i install win10 from zero today and Alan update the drivers too xd everything is working good DCH-UAD v6.0.9159.1 + Dolby Atmos v3.30000.4.0 ♥♥♥

 

[Briareos-H]

I uninstalled everything from Realtek and ran DriverStoreExplorer, but trying to install either the DCH-UAD or Standard versions fails with an error message saying I already have another Realtek product installed and need to uninstall it first. There's nothing from Realtek left in DriverStoreExplorer or Device Manager. Where can I look to get this fixed?

 

[Ferather]

I hate that app.

 

[AAF Optimus]

I uninstalled everything from Realtek and ran DriverStoreExplorer, but trying to install either the DCH-UAD or Standard versions fails with an error message saying I already have another Realtek product installed and need to uninstall it first. There's nothing from Realtek left in DriverStoreExplorer or Device Manager. Where can I look to get this fixed?

HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall

Delete Key > {F132AF7F-7BCA-4EDE-8A7C-958108FE7DBD}_is1

 

[MasterBeiShen]

@Alan Finotty DTS:X Ultra used to work on 9137... hasn't worked for me since 9147. It says "Please connect external speakers or headphones to use DTS audio controls". I have a license for DTS Sound Unbound and that works fine.

I noticed DTS:X Ultra actually says it will be automatically configured if I run my headphones as speakers directly to the motherboard. No idea if it's even working or not.

 

[TheDoctorTash]

just in case... someone can make an auto uninstaller/cleaner via cmd or something? for example "amdcleanuputility.exe" which help a lot to fully remove the amd drivers and clean the pc of any traces when someone need to do a clean installation gpu drivers... thanks! ♥

Also, just lucky i install win10 from zero today and Alan update the drivers too xd everything is working good DCH-UAD v6.0.9159.1 + Dolby Atmos v3.30000.4.0 ♥♥♥

I wrote the uninstaller! Run it with powershell as administrator.
This script run the original uninstaller then clean uwp apps, old folders, drivers, registry and services AAF. After running the original uninstaller, do not agree to reboot!

 

[AAF Optimus]

I wrote the uninstaller! Run it with powershell as administrator.
This script run the original uninstaller then clean uwp apps, old folders, drivers, registry and services AAF. After running the original uninstaller, do not agree to reboot!

View attachment 201255

@TheDoctorTash Nice solution colleague. Allow me to pin it to the first post. I await reply via PM.

 

[Briareos-H]

HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall

Delete Key > {F132AF7F-7BCA-4EDE-8A7C-958108FE7DBD}_is1

That got it! Everything is installed now, great work.

 

[ddearce]

Hi,
First of all, thank you for this modded driver. Also, English is not my primary language so sorry for any misspelling or nonsense .

Before the 20h1 update I was able to use this driver and the one from DJ Urko without problems.
Yesterday I updated windows, and the driver stopped working.

The driver installs without any errors, but no sound is coming from the speakers, only when there is an error or a notification in windows works, then is all silence.

When I go to the sound options/properties and try to change the frequency (24 bits, 16 bits, etc) the dialog box just crash.
If I try to set up 5.1 speakers the system hangs for a second, and then an error message shows up telling me that the device is not compatible.

I tried:

Deleted everything and then install fresh.
Enabled developer mode
Enabled unsigning installs

Any ideas?

Thanks.

 

[AAF Optimus]

Hi,
First of all, thank you for this modded driver. Also, English is not my primary language so sorry for any misspelling or nonsense .

Before the 20h1 update I was able to use this driver and the one from DJ Urko without problems.
Yesterday I updated windows, and the driver stopped working.

The driver installs without any errors, but no sound is coming from the speakers, only when there is an error or a notification in windows works, then is all silence.

When I go to the sound options/properties and try to change the frequency (24 bits, 16 bits, etc) the dialog box just crash.
If I try to set up 5.1 speakers the system hangs for a second, and then an error message shows up telling me that the device is not compatible.

I tried:

Deleted everything and then install fresh.
Enabled developer mode
Enabled unsigning installs

Any ideas?

Thanks.

Make sure you have not installed the DTS Interactive decoder.

 

[Ferather]

@MasterBeiShen, did you use the DriverStoreExplorer app to force remove drivers, I've said this many times, it breaks things, sometimes permanently.

In some cases, a full reset can fix the app and interfaces, but it wont fix what that app does to Windows: DTS_Full_Reset.7z

 

[AAF Optimus]

@Alan Finotty DTS:X Ultra used to work on 9137... hasn't worked for me since 9147. It says "Please connect external speakers or headphones to use DTS audio controls". I have a license for DTS Sound Unbound and that works fine.

I noticed DTS:X Ultra actually says it will be automatically configured if I run my headphones as speakers directly to the motherboard. No idea if it's even working or not.

I found the problem and will be reposting the package. I'll let you know when it's ready.

 

[Ferather]

Service? Before you update I'll send you some codes. Edit: Sent

 

[AAF Optimus]

Service?

Missing registry data from the dtscnt64.dll control library.