And how does one find out if they have an SST device? I have an onboard Realtek audio card that comes with my Gigabyte Aorus Gaming 7 motherboard. Should I leave this option unchecked?
Alan, I have installed your latest driver 6.0.8924.1, only Realtek default effects with DDL/DST and Dolby Atmos.
DDL/DST on SPDIF is working, although seems quite low volume compared to the former PC (I used to have ALC 887 on my old computer, I replaced it wit Gigabyte Z390 Designware, with ALC 1220b.
The problem is no effect is working, also no volume slider has any influence (neither windows, win media player, or Films and TV).
Already tried the third spoiler from page 1.
Win 10, version 1909
I used one of your older version close to my 6.0.8881.1 version installed, then I unistalled that and tried again your latest version. Now I have your AAF Optimus Sound driver, and X-FI MB5 working. The only thing strange is that the version of Realtek is again 6.08881.1...
Look at the picture here:
Hi, Alan! Thank you for amazing work. Unfortunately I ran into a problem with your package, I hope you can provide some help. I have the latest one from GitHub (AAFHDAudioPack-6.0.8924.1). I completely removed all the sound related stuff from windows (Realtek driver, Realtek audio console, dolby access, sound blaster connect), then I installed your driver. It seems to install fine, I see it in device manager, I have the audio playing. When I try to change digital output default format to either DDL Live or DTS, I get the message "This format is not supported", although when I test DTS or Dolby Digital on Supported Formats page the audio is playing perfectly.
I have asrock phantom gaming 9 with ALC1220, Win10 1909.
Any help would be appreciated, thank you.
1 - Open "Realtek Audio Device Tweak" from your Desktop.
2 - Check the box "Customized Platform".
3 - Edit the double fields "VID", "PCI VID" and "Verb VID" and leave as it is in the image below:
1 - Open "Realtek Audio Device Tweak" from your Desktop.
2 - Check the box "Customized Platform".
3 - Edit the double fields "VID", "PCI VID" and "Verb VID" and leave as it is in the image below:
I tried the latest version (AAF Optimus Sound 6.0.8924.1 (Signed)) and the version (AAF HD Audio Modded 6.0.8911.1 (Signed) (Bugfix)) and both did not work.
Version 6.0.8924.1 simply installs only SB 720º, Dolby Atmos, Realtek HDA (to change) and Nahimic 3, but the sound remains Realtek 6.0.8703.1 without modification
Version 6.0.8911.1 even installs the driver with names, but without DDL and DTSI, which I apply with Realtek HDA, and they appear, and the sound disappears, the drive signature disappears, and the SB 720 says no has connected board
My steps:
0. Creat Restore point windows
1. Shift Restart, disable the driver signature version
2. Install your .exe with windows update permisions (select all itens any less buss).
3. Restart system
He has a step by step, his layman with this and fearful, because the wind is warning of permanent damage.
My Mobo is a Gigabyte B360M AORUS GAMING 3 (rev. 1.0)
My codec is Realtek® ALC892 (High Definition Audio - 2/4 / 5.1 / 7.1-channel [multizone] - Support for S / PDIF Out)
Windows 10 Education v.1909 compilation 18363.815
Tks a lot
Hi, modding a driver requires hardware. Try to understand this simple subject, without a hardware we can't load or test modded drivers. If u donate an Asus Xonar card to Alan or me or anyone who is expert in this subject he can gladly make a mod for u. @antonkaz
in that case, LTakahashi has to use DriverStore Explorer (RAPR) to uninstall any Realtek extensions and other software components relating to Realtek before clean installing the modded driver.
in that case, LTakahashi has to use DriverStore Explorer (RAPR) to uninstall any Realtek extensions and other software components relating to Realtek before clean installing the modded driver.
I got it, removed it and did a clean installation, the last version didn't really work very well, the gray and black plugs were inverted (one turned line in and the other line out of another specification box - side and rear, I don't remember), and the orange (sub / center) didn't work when I turned off only the central box (mine broke).
But with the previous version (6.0.8911.1) it's working perfectly (to work I installed without the bus from the last window that warns about intel cards change to hdaudio)
Hiya, not sure what happened (shoulda just left it alone) but after installing latest windows doesnt even see the Realtek sound device. Good news is my ssdshould be here tonight and I will do clean install but super bad results as of now...
Is there a similar mod made for the Creative Audio ZxR type of cards? That card has the older type of Creative SBX software (same functionality), had DDL and DTS Connect, but I don't have any of the other goodies that you have unlocked for the Realtek drivers.
I am not even sure if it is possible...
An off-ish question.
I have X470 Taichi Ultimate, with integrated ALC 1220.
I am only using the digital out (nothing on the analogue ports), to feed my Essence STU, via optical cable. So strictly stereo, on my mackie studio monitors, or hd598.
Is this a case of use, where sound drivers matter? I mean is it worth from any aspect to upgrade from windows built in sound driver, to something realtek, or this modded package?
An off-ish question.
I have X470 Taichi Ultimate, with integrated ALC 1220.
I am only using the digital out (nothing on the analogue ports), to feed my Essence STU, via optical cable. So strictly stereo, on my mackie studio monitors, or hd598.
Is this a case of use, where sound drivers matter? I mean is it worth from any aspect to upgrade from windows built in sound driver, to something realtek, or this modded package?
You can try this mod, but you must select the desired enhancements on the Tasks page of the installer, and if your focus is only to enjoy the optical output, you also have the option to select only the patch that will activate Dolby Digital Live and DTS Interactive, that after installing this mod, will be available on digital outputs.
An off-ish question.
I have X470 Taichi Ultimate, with integrated ALC 1220.
I am only using the digital out (nothing on the analogue ports), to feed my Essence STU, via optical cable. So strictly stereo, on my mackie studio monitors, or hd598.
Is this a case of use, where sound drivers matter? I mean is it worth from any aspect to upgrade from windows built in sound driver, to something realtek, or this modded package?
In your case, I would recommend not use any mods. Especially not DTS interactive/DDL, as the Essence STU does not support that.
Your device is of so high quality that most mods might cause undue distortion. At best, I can recommend you apply Dolby Atmos, to get surround effects on your headphones.
NEW DRIVERS RELEASED IN GITHUB
UPDATED VERSION TO 6.0.8945.1
NEW FIX
ATTENTION: You will need to uninstall the currently installed version before continuing with this installation. A condition has been imposed for this due to problems reported by some users.
can someone please help me. Sounds come out of the 5.1 speakers when i use the "Test" option but when i listen to music or watch videos it only comes out the front 2 speakers, can someone please give me any advice.
can someone please help me. Sounds come out of the 5.1 speakers when i use the "Test" option but when i listen to music or watch videos it only comes out the front 2 speakers, can someone please give me any advice.
NEW DRIVERS RELEASED IN GITHUB
UPDATED VERSION TO 6.0.8945.1
NEW FIX
ATTENTION: You will need to uninstall the currently installed version before continuing with this installation. A condition has been imposed for this due to problems reported by some users.
@Alan Finote
Thank you very much for your updated mods
Thumbs up very much
My very dearest wish is, when you could listen to me is it that can you to us something newer options and some of fresher?
I give you some tips of what and when from you could combine your mods
I have many ideas in my head and I will asap when I have an idea to telling you, when it is okay for you.
I wish for us you that we can making together these ideas and also I could participate in your work, just for a few modifications or tips.
My next wish is that can we these messaging via PM if you to agreed?
I'm looking forward for your answer here via forum posting
(to work I installed without the bus from the last window that warns about intel cards change to hdaudio)
