Realtek Modded Audio Driver for Windows 10/11 - Only for HDAUDIO

[R1V4L]

I still haven't figured out why that is.

Another issue: Sonic Studio works now, but Soundblaster Connect 720 doesn't detect audio device

 

[m4x89]

Hi Alan, can you tell me why all the profiles has been duplicated inside SB Connect?

The effects however work flawlessly.

Regards

 

[AAF Optimus]

Hi Alan, can you tell me why all the profiles has been duplicated inside SB Connect?

View attachment 157146

The effects however work flawlessly.

Regards

Which license did you activate, BlasterX 360° or 720°?

 

[LucasPrunzel]

Opa, Tudo bom Alan? pode me ajudar com o Sonic Studio 3, ele não está abrindo. mostrando a seguinte mensagem, "The current sytem is not supported, or the audio driver has not been properly installed."

 

[AAF Optimus]

Opa, Tudo bom Alan? pode me ajudar com o Sonic Studio 3, ele não está abrindo. mostrando a seguinte mensagem, "The current sytem is not supported, or the audio driver has not been properly installed."
View attachment 157147

Type Windows + X on your keyboard, type "services.msc" and check the list if the service "A-Volute Multi APO Control Service" is running. If not, start it and try to reopen Sonic Studio 3.

 

[LucasPrunzel]

Type Windows + X on your keyboard, type "services.msc" and check the list if the service "A-Volute Multi APO Control Service" is running. If not, start it and try to reopen Sonic Studio 3.

somente o Nahimic 3 aparece.

 

[AAF Optimus]

somente o Nahimic 3 aparece.
View attachment 157149

It is himself.

 

[LucasPrunzel]

It is himself.

Sem sucesso.

 

[AAF Optimus]

Sem sucesso.

Before installing this mod, did you uninstall any Realtek audio drivers previously present on your system?

 

[LucasPrunzel]

Before installing this mod, did you uninstall any Realtek audio drivers previously present on your system?

não, estou com a ultima versão disponível no site da minha placa mãe.

 

[AAF Optimus]

não, estou com a ultima versão disponível no site da minha placa mãe.

There is the problem. It is necessary that you do not only uninstall the mod, but also the Realtek audio driver that you had previously installed. To uninstall the previous driver, I recommend that you use DriverStoreExplorer (RAPR).

 

[R1V4L]

ASIO driver crashes both Winamp and AIMP, and when it doesn't - the sound is distorted alot.

 

[AAF Optimus]

ASIO driver crashes both Winamp and AIMP, and when it doesn't - the sound is distorted alot.

Do not worry. In the next release, this will already be resolved.

 

[onsekiz]

Disabled the ethernet and wifi both while uninstalling everything. Deleted all AAF related drivers after restart by Driver Store Explorer. And restarted, again.
Reinstalled with AAF Bus, Sonic Studio, Dolby and ASIO. After restart I had activated the internet connections.
Now I could manage to activate Sonic Studio 3 and Dolby Atmos, never bothered with Nahimic. Couldn't make the SB Connect work, just ditched it.

All effects are applied so far only but Upmix/Surround of Sonic Studio. That option has no effect at all.
But choosing the option Dynamic at Dolby creates the surround for my 5.1. For those who try to upmix I can Dolby has the best sound quality.

Regards.

 

[m4x89]

Which license did you activate, BlasterX 360° or 720°?

The default one, 720°

 

[Diogo Silva]

PT: Olá @Alan Finote, o que é prometido é devido, instalei o seu Driver e como pode ver na imagem todos os programas correm sem erros, o que já é um bom começo, o problema é que o DTS integrado no programa da Realtek e o Dolby Atmos não noto diferença no som quando mexo neles, é como se não estivessem os programas.
No Sonic Studio 3 também não noto diferença, só noto quando mexo no Equalizador, apenas.
Não sei se me fiz intender e se tem solução para o meu problema.
Obrigado.


EN:
Hello @Alan Finote, what is promised is due, I installed your Driver and as you can see in the image all the programs run without errors, which is a good start, the problem is that the DTS integrated in the Realtek program and the Dolby Atmos I don't notice a difference in the sound when I touch them, it's like the programs aren't there.
In Sonic Studio 3 I don't notice any difference either, I only notice it when I move the Equalizer, only.
I don't know if I made myself understood and if there is a solution to my problem.
Thank you.

 

[BitStarFox]

I believe that some FX key (s) have been lost on your system, that is, the FX / EP effects bank record is corrupted. Therefore, you will need to uninstall your driver, restart your PC and install it again.

Hi Alan, thank you for the information. I went ahead and re-installed the driver that came with the laptop. Unfortunately i still have the same issues. It seems like it is not recognising the configuration and enabling the correct FX/SFX settings. There does not seem to be a hdaud.dat file within the drivers. I assume that when i wiped instead of refreshing it lost the correct configuration file stored in the system 32 folders.

Sonic Studio II still does not work changing it's settings, nor do i have the enhancements tab still.

I did find this zip though. It looks like the right configurations settings, has the right date, 2015, but never seems to extract itself, just puts the zip file into the System32/drivers,. Also a file in the driver folder called RTKSSTsetting.dat I also found the Setup Configuration ini, the only one that contains my device id. In the Vista64 folder of the drivers i linked earlier.


-----
Small update. using the Realtek audio test program, I've managed to re-enable sonic studio support and it now works with the laptops speakers, but not my headphones.
But i've managed to re-enable it in the real tek control panel though for headphones. but not sonic studio
I also fixed the jack sensing as well.
I might be missing other enhancements though.

So i am still looking for help with the configuration.

 

[StuDentBR]

PT: Olá @Alan Finote, o que é prometido é devido, instalei o seu Driver e como pode ver na imagem todos os programas correm sem erros, o que já é um bom começo, o problema é que o DTS integrado no programa da Realtek e o Dolby Atmos não noto diferença no som quando mexo neles, é como se não estivessem os programas.
No Sonic Studio 3 também não noto diferença, só noto quando mexo no Equalizador, apenas.
Não sei se me fiz intender e se tem solução para o meu problema.
Obrigado.


EN:
Hello @Alan Finote, what is promised is due, I installed your Driver and as you can see in the image all the programs run without errors, which is a good start, the problem is that the DTS integrated in the Realtek program and the Dolby Atmos I don't notice a difference in the sound when I touch them, it's like the programs aren't there.
In Sonic Studio 3 I don't notice any difference either, I only notice it when I move the Equalizer, only.
I don't know if I made myself understood and if there is a solution to my problem.
Thank you.

View attachment 157176

How did you get dts neo pc?

 

[Diogo Silva]

How did you get dts neo pc?

It becomes with the Driver. I don't know if it influences, but my motherboard was ready for DTS Custom.

 

[xsohydra]

There is the problem. It is necessary that you do not only uninstall the mod, but also the Realtek audio driver that you had previously installed. To uninstall the previous driver, I recommend that you use DriverStoreExplorer (RAPR).

I tried many times with RAPR but still the service name is Nahimic 3 Service and Sonic Studio 3 does not work.

 

[Bansaku]

After a fresh install of Windows and installing the latest driver version I still only get 2-channel audio when DTS/DDL is selected. Here are my steps:

Uninstalled Reraltek drivers with DDU
Started installer
Installed aaf optimus bus driver when asked
Checked off Realtek with DTS/DDL
Check off Dolby Atmos
Installed and restarted.

Do I need to activate DDL using the Realtek Audio Driver Utility afterwards? Both DTS and DDL show as active in the sound and Realtek control panels.
P.S. Dolby Atmos works.

 

[AAF Optimus]

After a fresh install of Windows and installing the latest driver version I still only get 2-channel audio when DTS/DDL is selected. Here are my steps:

Uninstalled Reraltek drivers with DDU
Started installer
Installed aaf optimus bus driver when asked
Checked off Realtek with DTS/DDL
Check off Dolby Atmos
Installed and restarted.

Do I need to activate DDL using the Realtek Audio Driver Utility afterwards? Both DTS and DDL show as active in the sound and Realtek control panels.
P.S. Dolby Atmos works.

Reinstall the mod again, but this time, when you reach the Tasks page, in the first two options, select "Realtek Default APO". Once installed, check the spoilers "HOW TO ACTIVATE DOLBY DIGITAL LIVE" or "HOW TO ACTIVATE DTS INTERACTIVE" at the end of the first post of this thread.

 

[SashaElfXp]

Somebody has this error? i'm looking for this thing if you known i will be happy with you uwu

 

[AAF Optimus]

Somebody has this error? i'm looking for this thing if you known i will be happy with you uwu

Make sure you have Microsoft Visual C ++ runtimes (2005-2019).

 

[pipes]

work well with alc1220 on tuf x570 gaming plus

how can enable dts 5.1?