Realtemp Crash & Wont Recognize CPU

[guitarfreaknation]

Whats up good people?

I have a little problem using Realtemp. (The newest ver.)
When I run it it doesnt quite recognize the CPU.
When I run sensor test like 5-10 min in, it freezes my pc.

I am running Vista Ultimate 64-bit
My CPU is Core 2 Quad Q9550 @ 2.8

Any help would be much appreciated!

 

[burebista]

Hehe, Kevin knowns about you. This is his answer to your unrecognized CPU

The Specification box in CPU-Z shows the exact information that is written into the CPU. For some reason, it doesn't have a model number in that box so RealTemp reports ----. Sometimes with Intel ES Engineering Sample CPUs, Intel leaves out that information but with most retail CPUs that information is always there.

 

[95Viper]

You might want to read the readme.txt that came with the software package.

Add the appropriate GPU=x (x= number for you GPU) line to your realtemp.ini file.
-use GPU=2 if you have an ATI GPU
-use GPU=1 if you have an Nvidia GPU
-use GPU=3 if you have one of each
-use GPU=0 if you have neither GPU or if RealTemp crashes or is unable to start because of the ATI code.

 

[guitarfreaknation]

Hehe, Kevin knowns about you. This is his answer to your unrecognized CPU

Ok that is no big deal then but It freezes when I run the sensor test. I tried it twice using different versions too.

 

[burebista]

Below is a thread with same problem like yours.