- Joined
- Feb 21, 2006
- Messages
- 1,978 (0.30/day)
- Location
- Toronto, Ontario
System Name | The Expanse |
---|---|
Processor | AMD Ryzen 7 5800X3D |
Motherboard | Asus Prime X570-Pro BIOS 5003 AM4 AGESA V2 PI 1.2.0.B |
Cooling | Corsair H150i Pro |
Memory | 32GB GSkill Trident RGB DDR4-3200 14-14-14-34-1T (B-Die) |
Video Card(s) | AMD Radeon RX 7900 XTX 24GB (24.3.1) |
Storage | WD SN850X 2TB / Corsair MP600 1TB / Samsung 860Evo 1TB x2 Raid 0 / Asus NAS AS1004T V2 14TB |
Display(s) | LG 34GP83A-B 34 Inch 21: 9 UltraGear Curved QHD (3440 x 1440) 1ms Nano IPS 160Hz |
Case | Fractal Design Meshify S2 |
Audio Device(s) | Creative X-Fi + Logitech Z-5500 + HS80 Wireless |
Power Supply | Corsair AX850 Titanium |
Mouse | Corsair Dark Core RGB SE |
Keyboard | Corsair K100 |
Software | Windows 10 Pro x64 22H2 |
Benchmark Scores | 3800X https://valid.x86.fr/1zr4a5 5800X https://valid.x86.fr/2dey9c |
Hi all,
So I was lucky enough to get a hold of Reference 6800XT for about $1500 CAD a few days ago and sold my RX580 for $500.
Old
New
However I think I would like to Side mount the GPU and slap an AIO on instead of the reference cooler.
So the next question is I would need the right parts to side mount the GPU in my case and it has to be a PCIe 4.0 riser Cable so something like this below.
What is the correct length for the Riser and is linkup a good brand for this? i've heard of issues with lower quality cables etc.
Just looking for Feedback and suggestions.
So I was lucky enough to get a hold of Reference 6800XT for about $1500 CAD a few days ago and sold my RX580 for $500.
Old
New
However I think I would like to Side mount the GPU and slap an AIO on instead of the reference cooler.
Alphacool Eiswolf 2 AIO - 360mm Radeon RX 6800/6800XT/6900 Reference Design with Backplate
The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with...
www.aquatuning.us
So the next question is I would need the right parts to side mount the GPU in my case and it has to be a PCIe 4.0 riser Cable so something like this below.
LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX3090 RX6900XT x570 B550 Z590 Tested] Shielded Extreme High-Speed Vertical Mount Gaming PCI Express Gen4┃Straight Socket {15cm} 3.0 Gen3 & TT Compatible--- : Amazon.ca: Electronics
LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX3090 RX6900XT x570 B550 Z590 Tested] Shielded Extreme High-Speed Vertical Mount Gaming PCI Express Gen4┃Straight Socket {15cm} 3.0 Gen3 & TT Compatible--- : Amazon.ca: Electronics
www.amazon.ca
What is the correct length for the Riser and is linkup a good brand for this? i've heard of issues with lower quality cables etc.
Just looking for Feedback and suggestions.