83% but since I have improved my case fan configuration, will some games now and see how it performs.what is your fan speed at max temp?
83% but since I have improved my case fan configuration, will some games now and see how it performs.what is your fan speed at max temp?
Processor | Ryzen 7 1700 |
---|---|
Motherboard | MSI x470 gaming plus |
Cooling | coolermaster AIO |
Memory | 16gb Gskill tridentz |
Video Card(s) | ASUS Strix Geforce RTX 2060 |
Storage | Crucial NVME M.2 1 TB pcie SSD and 1TB Western Digital HDD. |
Display(s) | LG 34" superwide 2560x1080 |
Case | Phanteks Evolv X |
Audio Device(s) | USB Audio Interface with Stereo Studio Monitors. |
Power Supply | EVGA 600watt 80 plus |
Mouse | gskill "ripjaw" LOL |
Keyboard | Piece of shit Lenovo Freebie - best keyboard ever. |
Software | Win 10. |
Maybe give the MSI 2060 GAMING Z at look? As long as you've got the space for a three slot card. Also it's heavy so you might need to provide some extra support.
I can vouch for the heatsink keeping temperatures under control if you have some airflow through the case.
https://www.msi.com/Graphics-card/GeForce-RTX-2060-GAMING-Z-6G
what is your fan speed at max temp?
Ran a burn test for 15 mins on furmark then after 15 mins enabled furry object rendering. Here are the results, at the end it was stuck on 74degreesC removed my dust filters and it started slowly dropping to 71degreesC so far I am happy, but I shouldn't have to remove the dust filters, its the lian li pc o-11air case which is known to have air flow issues, culprit being the dust filters. Will be getting rid of this case anyway.
2x 100mm fans (windforce) is OK, but its little radiator with only two heat pipes...there is a problem with the cooling system 2x fan
83% but since I have improved my case fan configuration, will some games now and see how it performs.
2x 100mm fans (windforce) is OK, but its little radiator with only two heat pipes...
that clear ... the heat sink on rev2 is best
Hello. I have also bought the same Gigabyte RTX 2060 Windforce OC. It's a good card but i hate the temperature .... the temp goes and stays between 80-82c in stock clocks ..... the temp situation is same as in this video .... could you happen to know why is that and what is the solution? Thanks
that's enough gigabyte
there is a problem with the cooling system 2x fan
Again, these temperatures around 80C is normal, the only problem is overpriced and pointless windforce2x-version in my opinion. The cheap one version is... ok I guess. Actually, if I knew about it before buying, I would choose another card with better cooler for 10-20$ more.What I can not understand is companies test cards before release ? is gigabyte test their gpus before release?
No, I try to change a video card ;Dany one try change thermal compound ?
System Name | The work PC /2700x/5950x |
---|---|
Processor | 3900X stock/ 2700x stock/ 5950x 4200 MHz fixed @ 1,056-1,08V |
Motherboard | Gigabyte AORUS Master X570/2xMSI X470 M7 AC |
Cooling | Custom WC XSPC RX480, Laing DDC, XSPC Laing DDC Top V3 and EK Velocity/NH15/NH-U12S SE |
Memory | 32 GB Viper 3600/14 /16 GB Trident Z F4-4000C18D-16GTZSW 3600 /32 GB G Skill Flare CL14 3400 |
Video Card(s) | 2070 Super X MSI/GTX 970 MSI/ GTX 970 MSI |
Storage | 1 TB SSD+500 GB NVMe / 500 GB SSD/ 500 GB SSD |
Display(s) | Dell UltraSharp U2518D/2408WFP |
Case | Corsair 800D / Lian test bench/NZXT 500 |
Power Supply | AX 850 Titanium/AX 860i/AX 760 |
Software | Dual boot/Win 7 & 10 / Linux / Win 10 |
Don't trust this post.It's good to remember to OP that you can always change thermal compound. If you use a good one, you can easily gain 20% on temps. I bet that Gigabyte uses really poor performance thermal compound. At least here these changes don't avoid guarantee when there's no tape on screws.
I tried but i don't know thermal compound's name. Now it reaches 84C.any one try change thermal compound ?
It's good to remember to OP that you can always change thermal compound. If you use a good one, you can easily gain 20% on temps. I bet that
Gigabyte uses really poor performance thermal compound. At least here these changes don't avoid guarantee when there's no tape on screws.
I agree with you.Don't trust this post.
20 % of 273+80 Kelvin is 70.6 K reduction => net result 10 degree Celcius. You do know when talking percentage it is of SI units.
20% of 80 C is 16 degree C => net result 64 degree C. I have been nice and shown the best result. I could have taking Rankin or the Fahrenheit which again show the absurd in the statement.
What you can get is -5 to + 5 degree Celsius reduction. - 5 => increase in temperature if you are a noob not knowing how to replace TIM, 5 degree C if the manufacturer f**ked up and either forgot TIM or put in 2 mm.
How do you know?.. the heat sink on rev2 is best
You probably knows nothing about what bad applied or even bad thermal compounds are capable to do and the huge difference that you can have on change it for a good thermal compound like Artic Silve 5. There's no problem on it, people don't need to know everything. The problem is when you disqualify posts only because you're absolute ignorant.Don't trust this post.
20 % of 273+80 Kelvin is 70.6 K reduction => net result 10 degree Celcius. You do know when talking percentage it is of SI units.
20% of 80 C is 16 degree C => net result 64 degree C. I have been nice and shown the best result. I could have taking Rankin or the Fahrenheit which again show the absurd in the statement.
What you can get is -5 to + 5 degree Celsius reduction. - 5 => increase in temperature if you are a noob not knowing how to replace TIM, 5 degree C if the manufacturer f**ked up and either forgot TIM or put in 2 mm.
Processor | i7 8700k 4.6Ghz @ 1.24V |
---|---|
Motherboard | AsRock Fatal1ty K6 Z370 |
Cooling | beQuiet! Dark Rock Pro 3 |
Memory | 16GB Corsair Vengeance LPX 3200/C16 |
Video Card(s) | ASRock RX7900XT Phantom Gaming |
Storage | Samsung 850 EVO 1TB + Samsung 830 256GB + Crucial BX100 250GB + Toshiba 1TB HDD |
Display(s) | Gigabyte G34QWC (3440x1440) |
Case | Fractal Design Define R5 |
Audio Device(s) | Harman Kardon AVR137 + 2.1 |
Power Supply | EVGA Supernova G2 750W |
Mouse | XTRFY M42 |
Keyboard | Lenovo Thinkpad Trackpoint II |
Software | W10 x64 |
Is the problem on vram (micron)? FE 2060 have samsung vram
or rtx 2060 very hot compare to gtx 1060 ?
Processor | Rocket Lake Core i5 11600K @ 5 Ghz with PL tweaks |
---|---|
Motherboard | MSI MAG Z490 TOMAHAWK |
Cooling | Thermalright Peerless Assassin 120SE + 4 Phanteks 140mm case fans |
Memory | 32GB (4 x 8GB SR) Patriot Viper Steel 4133Mhz DDR4 @ 3600Mhz CL14@1.45v Gear 1 |
Video Card(s) | Asus Dual RTX 4070 OC |
Storage | WD Blue SN550 1TB M.2 NVME//Crucial MX500 500GB SSD (OS) |
Display(s) | AOC Q2781PQ 27 inch Ultra Slim 2560 x 1440 IPS |
Case | Phanteks Enthoo Pro M Windowed - Gunmetal |
Audio Device(s) | Onboard Realtek ALC1200/SPDIF to Sony AVR @ 5.1 |
Power Supply | Seasonic CORE GM650w Gold Semi modular |
Mouse | Coolermaster Storm Octane wired |
Keyboard | Element Gaming Carbon Mk2 Tournament Mech |
Software | Win 10 Home x64 |