• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Safe E8500 Voltage - Long Term

Mediocre

New Member
Joined
Jun 11, 2006
Messages
1,237 (0.19/day)
Processor C2D E8400 @ 3.60GHz
Motherboard ASUS P5Q-Pro w/ extra Vreg HS
Cooling Apogee GTX, 2x120mm DD, MCP-1000P Res/Pump, all 3/8" 7x80mm (4x push/pull, 2x exhaust, 1x side)
Memory 2 x 1GB Corsair Dominator DDR2 1066 @ 800 (4-3-3-6)
Video Card(s) EVGA 9800GTX+
Storage 3 x 80 GB WD SATA300 (2x RAID 0)
Display(s) Scepter x37 1080p 37" LCD & Samsung 204B
Case CoolerMaster HAF932
Audio Device(s) Onboard
Power Supply Mushkin HP-580AP (C/O TPU!)
Software Vista Ultimate (32-bit)
So the PC in my specs is being an incredible pain in the ass. Not sure what part it is, but all new parts are on their way. I'll figure this out one way or the other....


But anyway, I grabbed an E8500 (due in tuesday)... what would be a safe voltage for it... long term use?
I don't leave it on overnight or during the day, just for gaming and such a few hours a week...

Any thoughts?

Oh and it will be running under an apogee GTX and 2x120 DD rad, not worried about temps (quad ran under 40C load 1.425V)
 

1Kurgan1

The Knife in your Back
Joined
Dec 8, 2008
Messages
10,421 (1.86/day)
Location
Duluth, Minnesota
System Name My Comp | Fiancees Comp
Processor i7 5820k @ 4.6Ghz 1.285v| i5 2500k
Motherboard MSI x99 SLI Plus | AsRock Z77 Pro 3
Cooling Watercooled
Memory 16GB DDR4 2400 @ 2666 | 12GB DDR3 1600
Video Card(s) AMD R9 290x | MSI 5850 OC
Storage 128gb SSD + 2x 2TB | 2TB
Display(s) Asus 27" LCD | 25" Hanns G
Case CM Storm | CM Elite 430
Audio Device(s) Creative Recon 3D PCIe
Power Supply Enermax Galaxy 1250W | Rosewill 630w
Mouse Logitech G700s | Logitech G100s
Keyboard Logitech G901 | Logitech G105
Software Win 8.1 Ultimate x64 | Win 8.1 Ultimate x64
Benchmark Scores 3D Mark - Fire Strike Extreme - 4403
I wouldn't really go over 1.5v. That being said any higher volts will always shorten the life it's just flat out more stress on it. But 1.5v if you can maintain a good temp should be just fine, after that it's going to get real hairy.
 
Joined
Nov 13, 2007
Messages
10,209 (1.71/day)
Location
Austin Texas
Processor 13700KF Undervolted @ 5.6/ 5.5, 4.8Ghz Ring 200W PL1
Motherboard MSI 690-I PRO
Cooling Thermalright Peerless Assassin 120 w/ Arctic P12 Fans
Memory 48 GB DDR5 7600 MHZ CL36
Video Card(s) RTX 4090 FE
Storage 2x 2TB WDC SN850, 1TB Samsung 960 prr
Display(s) Alienware 32" 4k 240hz OLED
Case SLIGER S620
Audio Device(s) Yes
Power Supply Corsair SF750
Mouse Xlite V2
Keyboard RoyalAxe
Software Windows 11
Benchmark Scores They're pretty good, nothing crazy.
i dont go over 1.4 - IMO there is no OCing benfit past that.
 
K

kyle2020

Guest
wouldnt recommend over 1.45 for 24/7. Degradation will hit the chip harder at like 1.5V, 1.4V is my limit to 24/7 on any chip.
 
Joined
Dec 30, 2007
Messages
1,207 (0.20/day)
Location
Bitola, Macedonia
System Name Brutus
Processor AMD Ryzen 5600X PBO
Motherboard Asus Prime X570-P
Cooling EKWB AIO 240MM Push-Pull fans
Memory Patriot Viper Steel DDR4 4000 32GB (4x8) @4066 CL16, Custom Timings
Video Card(s) Asus GTX 1080Ti FE OC
Storage Kingston A2000 500GB + Toshiba 1TB HDD
Display(s) Samsung 24" S24D300 + 2x LG LED 24"
Case Cooler Master H500
Audio Device(s) SB X-Fi Titanium Fatality Professional
Power Supply Sama Forza Modular 750W 80+ Gold
Mouse Cooler Master Master Keys Lite
Keyboard Cooler Master Master Keys Lite
Software Windows 10 Pro 64-Bit
1.3625 V is considered max safe voltage by intel (under load) so therefore chip will probably not degrade at that and at a lower value. I'd stick to that myself.

45nm chips are rated at 1.3625, 65nm chips are rated at 1.5V (all C2D)
 
Joined
Jul 18, 2007
Messages
812 (0.13/day)
Location
Almonte, Canada
System Name Sonny Boy
Processor i5 11600K 4.9GHz @ 1.35 Vcore
Motherboard AORUS Z590 Elite AX
Cooling Deepcool Gammix 240mm AIO
Memory 4 X 8GB Teamgroup DDR4 3200MHz
Video Card(s) ASUS RTX 3060 Ti GDDR6X
Storage Adata Legend 1TB
Display(s) Philips 27" 4K
Power Supply Corsair 750W
Mouse Razer Basilisk
Keyboard Razer Huntsman V2
Software Windows 11 Pro
The 45nm can not take the volts the way the older 65nm could. They have a voltage breakdown phenomenum related to their metalization layer due to the new process they use. So I personally keep my E8400 and E8200 at about 1.375V and would not run them over 1.4V except for some benchmarking. I would suggest 1.4V max.
 
Top