Sapphire hd 5770 vapor-x | flash successful but ignored under Windows

[GLeader]

Hi,

I followed this tutorial (its french . so use google translat ^^) :

http://www.overclocking-pc.fr/forum...ATI-sous-windows-%28HD-3xxx-4xxx-5xxx-6xxx%29

and this one :

http://www.overclocking-pc.fr/forum...bloquer-les-fr%E9quences-sur-HD57xx-et-HD58XX

so I flashed my CG
small problem. the flash is active in the BIOS of the CG but not in practice (under windows / 3D Games / stress tests)
here are some pictures:

BRE :

GPU-Z CG idel :

GPU-Z load (stress with furmark) :

you can see in this imag that GPU/Mem frequencies and vcore are still the base ones = flash is not active ! [:huh:]

did I miss something in my flash?

and if i flash it with asus BIOS will i get vcore control ? if yes ! can i have a link to a working bios

thank you !

 

[Law-II]

Hi

did I miss something in my flash

Where the Catalyst drivers uninstalled and reinstalled?

atb

Law-II

 

[GLeader]

Hi



Where the Catalyst drivers uninstalled and reinstalled?

atb

Law-II

yes . uninstalled by the windows thing . restart PC . and installed literally a new version of CCC (13.10) .

 

[Law-II]

Hi

uninstalled by the windows thing

Maybe try this:

Uninstall any third party overclocking software

Next

Uninstall and deep clean AMD vga drivers
download this AtiMan to clean out drivers, you can get that here: Atiman Uninstaller.exe! (Link is safe, erocker uploaded it)
Disable UAC (User Account Control Settings) in windows control panel [this can be re-enabled at a later time]
install to C:\
Run Atiman Uninstaller.exe
Select: A
system will reboot and continue to run
Select: C
application will end [reselect application window]
Select: Q

Next

Reinstall Catalyst 13.10 Beta and or last known stable vga drive

atb

Law-II

 

[unclewebb]

It looks like the previous MHz values were probably saved and were not deleted when you uninstalled Catalyst. Try deleting those values manually and reinstall the drivers. Your settings should be in here.

C:/Users/"your name folder"/AppData/Local/ATI/ACE

Here's how to show your hidden files in Windows 7.

http://windows.microsoft.com/en-ca/windows/show-hidden-files#show-hidden-files=windows-7

Thanks to antstubell on Tom's Hardware for this suggestion.

You might have to boot up into safe mode to delete this folder and make sure it is gone before installing the drivers again.

 

[GLeader]

It looks like the previous MHz values were probably saved and were not deleted when you uninstalled Catalyst. Try deleting those values manually and reinstall the drivers. Your settings should be in here.

C:/Users/"your name folder"/AppData/Local/ATI/ACE

Here's how to show your hidden files in Windows 7.

http://windows.microsoft.com/en-ca/windows/show-hidden-files#show-hidden-files=windows-7

Thanks to antstubell on Tom's Hardware for this suggestion.

You might have to boot up into safe mode to delete this folder and make sure it is gone before installing the drivers again.

it works . but when i start a 3D thing, the screen go black and all freeze (keyboard, mouse, ect) . i ended by "unfreeze" it . and i saw in GPU-Z . that when the driver go in 3D mod (overvolted one) the voltage go down to 0v .
i tryed using an other voltage (1.15 instead of 1.2 or 1.125 base) same bug
so i'm now using my original bios with some fan tweaks

 

[Ja.KooLit]

why dont you try to flash your cards under DOS?

its better (i think)