• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Sapphire TriXX Beta Up.....

pepdolesa

New Member
Joined
Jul 16, 2011
Messages
2 (0.00/day)
Likes
0
Hi again, another little bug.
I make a personalized preset for the fan curve, I must to activate one by one all the cards, when I arrive at 4th card and put it in Custom, the 1st card goes to auto.
Three suggest, in cards name add the controler or PCI port to distinguish between them, individual fan curves and public histeresis and delay times.

Thanks
 

ColdBrew

New Member
Joined
Jul 18, 2011
Messages
1 (0.00/day)
Likes
0
I've tested TriXX v4.01 and v4.02 with CCC v11.6 on my new Sapphire 6850 and while I can change Core Clock and Memory clock I can't change the GPU Voltage without it resetting/locking up the computer.

Is this a known issue? Bug fix in the works?
 
Joined
Jul 12, 2006
Messages
112 (0.03/day)
Likes
5
Processor C2D E8400 @ 4000
Motherboard Gigabyte DS3
Cooling Stock cooler from E6400
Memory Crucial 800MHz/PC2-6400 Ballistix
Video Card(s) Sapphire Toxic HD6850 @ 950/1150
Running 4.02 with Sapphire Toxic 6850 and win7.

Fan profile keeps resetting to Automatic after every restart.

Tried changing fan profile etc to get it to save but no change.

Not had a version that works with the fan since 3.

Great program though Wiz :toast:
 
Joined
Jul 12, 2006
Messages
112 (0.03/day)
Likes
5
Processor C2D E8400 @ 4000
Motherboard Gigabyte DS3
Cooling Stock cooler from E6400
Memory Crucial 800MHz/PC2-6400 Ballistix
Video Card(s) Sapphire Toxic HD6850 @ 950/1150
Ooops worse than I thought, not setting OC on restart either.

OC set and saved as 950/1150 1.2mV

after restart settings 600/1150 1.2mV
 

W1zzard

Administrator
Staff member
Joined
May 14, 2004
Messages
17,525 (3.44/day)
Likes
18,950
Processor Core i7-4790K
Memory 16 GB
Video Card(s) GTX 1080
Display(s) 30" 2560x1600 + 19" 1280x1024
Software Windows 7
found the problem with the fan profiles not sticking, will be fixed in next build. i'll check whats going on with the clocks
 

sleepeeg3

New Member
Joined
Mar 21, 2005
Messages
65 (0.01/day)
Likes
0
4.02 is definitely a much more worthy update than the version number suggest. Admire your talent, W1z.

Having an issue with Trixx not saving settings of second/third cards on bootup. Looks like CCC is overwriting. However, the cards need the Power Control settings of CCC.

Minor issues if you want to fix... Trixx reads wrong voltage for non-reference ASUS 6950 DCII 1GB. Issue because voltage set at below stock (0.793v) so locks up system if clocks applied.
 
Last edited:
Joined
Jul 12, 2006
Messages
112 (0.03/day)
Likes
5
Processor C2D E8400 @ 4000
Motherboard Gigabyte DS3
Cooling Stock cooler from E6400
Memory Crucial 800MHz/PC2-6400 Ballistix
Video Card(s) Sapphire Toxic HD6850 @ 950/1150
Ooops worse than I thought, not setting OC on restart either.

OC set and saved as 950/1150 1.2mV

after restart settings 600/1150 1.2mV
Problem may be CCC 11.6 related as can not get any of the vesions to work now, fan profiles working as before, but not OCing to set values, only going to 600 not 950. :confused:
 
Joined
Jul 12, 2006
Messages
112 (0.03/day)
Likes
5
Processor C2D E8400 @ 4000
Motherboard Gigabyte DS3
Cooling Stock cooler from E6400
Memory Crucial 800MHz/PC2-6400 Ballistix
Video Card(s) Sapphire Toxic HD6850 @ 950/1150
11.7 installed now, with V3.0 of trixx, and all working as before.

OCing and fan profiles working. :)

Will wait for next version with fix for fan profile.
 

fullinfusion

Vanguard Beta Tester
Joined
Jan 11, 2008
Messages
9,714 (2.59/day)
Likes
3,504
System Name Vanguard (RTG) Test Rig
Processor I7-7700K 4.8/5.2 24/7 depending on conditions.
Motherboard Asus Z270 Maximus IX Code
Cooling Custom water 240MM OCool 45mm plus 240 EK Radiator cooler
Memory Corsair Vengeance LED Red 4x8GB 32GB 3200MHz kit C-14
Video Card(s) 2 x Reference MSI RX Vega 56
Storage 960 Pro M.2 nvme 250GB, Samsumg 860 Evo 1TB / WD 1TB blue storage drive for my gal ^I^
Display(s) Nexius 32" freesync 2 HDR2 1440P
Case Corsair Obsidion 650D
Audio Device(s) Onboard
Power Supply EVGA Supernova G2 1300W
Mouse Mionix Naos 7000
Keyboard G15
Software Windows 10 Pro
Benchmark Scores Yeah lets talk about that shall we!
I get a warning about ULPS amds ultra low power setting. It wants me to disable it or the system will crash! Where do I go to disable it?
 
Joined
Oct 13, 2007
Messages
7,693 (2.00/day)
Likes
1,772
Location
Chicago
System Name DarkStar
Processor i5 3570K 4.4Ghz
Motherboard Asrock Z77 Extreme 3
Cooling Apogee HD White/XSPC Razer blocks
Memory 8GB Samsung Green 1600
Video Card(s) 2 x GTX 670 4GB
Storage 2 x 120GB Samsung 830
Display(s) 27" QNIX
Case Enthoo Pro
Power Supply Seasonic Platinum 760
Mouse Steelseries Sensei
Keyboard Ducky Pro MX Black
Software Windows 8.1 x64
There is a checkbox in options in Trixx. Thankfully, as it's a pita Registry edit otherwise...
 

fullinfusion

Vanguard Beta Tester
Joined
Jan 11, 2008
Messages
9,714 (2.59/day)
Likes
3,504
System Name Vanguard (RTG) Test Rig
Processor I7-7700K 4.8/5.2 24/7 depending on conditions.
Motherboard Asus Z270 Maximus IX Code
Cooling Custom water 240MM OCool 45mm plus 240 EK Radiator cooler
Memory Corsair Vengeance LED Red 4x8GB 32GB 3200MHz kit C-14
Video Card(s) 2 x Reference MSI RX Vega 56
Storage 960 Pro M.2 nvme 250GB, Samsumg 860 Evo 1TB / WD 1TB blue storage drive for my gal ^I^
Display(s) Nexius 32" freesync 2 HDR2 1440P
Case Corsair Obsidion 650D
Audio Device(s) Onboard
Power Supply EVGA Supernova G2 1300W
Mouse Mionix Naos 7000
Keyboard G15
Software Windows 10 Pro
Benchmark Scores Yeah lets talk about that shall we!
There is a checkbox in options in Trixx. Thankfully, as it's a pita Registry edit otherwise...
It was already checked off when I installed the program. Oh well I may as well stick with msi ab and that way I don't need to screw with the registry.
 
Joined
Aug 15, 2011
Messages
5 (0.00/day)
Likes
0
There seems to be a problem with the program's ability to adjust voltage on non-ref 5870 cards. In particular, my Vapor-X 5870 rev-2.

When Trixx first came out I was glad that I had found a program that had unlocked my voltage control,though at the time I didn't really need it, recently I wanted to use it but found out that the gpu voltage slider was not functioning or not responding. I downloaded the latest version which is the current one and it seemed to work the first time I launched the program, but when I re-opened it, the slider was not functioning once again.

Just something I wanted to make the developer aware of.
 

LookOut

New Member
Joined
Apr 28, 2008
Messages
6 (0.00/day)
Likes
0
its possible to run 2 x Radeon 6990 properly with the last sapphire trixx version ?

I'm still looking for a good overclocking tool but MSI After burner limits me to 1,25Volt and ASUS Smart Doc causes extremly frame drops with quad crossfire.

So I hope Sapphire trixx can handle this.
 

FreedomEclipse

~Technological Technocrat~
Joined
Apr 20, 2007
Messages
17,479 (4.35/day)
Likes
5,687
Location
London,UK
System Name Codename: Icarus
Processor Intel 8600k@4.8Ghz
Motherboard Asus ROG Strixx Z370-F
Cooling Corsair H105 {2x Corsair ML 120 Pro}
Memory Corsair Vengeance White LED DDR4 3200Mhz
Video Card(s) MSI 1070 Gaming X (Samsung)
Storage WD Black Edition 512GB SSD (Boot)|Crucial MX100|2x 3TB Toshiba DT01ACA300
Display(s) Asus PB278Q 27"
Case Corsair 760T (White) {1xFractal Design HP-12|1x140mm Noctua P14S Redux|2x Corsair ML 140 Pro}
Audio Device(s) Creative SB Z {Speakers: Logitech Z-5500 }
Power Supply Corsair AX760
Mouse Logitech G900 Chaos Spectrum
Keyboard Duckyshine Dead LED(s) III
Software Windows 10 Pro
Benchmark Scores (ノಠ益ಠ)ノ彡┻━┻
I was just wondering if this is a bug with some of the TriXX fan settings...

I uninstalled the latest afterburner beta after it in continually crashed my pc completely during BC2. I had not overclocked my card and i just used it to set up fan profiles. as the fan never goes above 35% fully loaded

so I uninstalled it and went back to setting the fan manually to 40-45% before i played a game.

Then i went to install the latest beta from TriXX and even though i can set up a custom profile. as soon as i restart the PC, it defaults back to automatic fan profiles and doesnt stay on Custom.

as far as i can remember when i was still using TriXX for my 2 5850s this problem never occured.

I TriXX bugged or is it just the way my cards are??
 

qgshadow

New Member
Joined
Aug 16, 2011
Messages
5 (0.00/day)
Likes
0
So is it possible to use Trixx and Power control settings?

and does anyone know at which clock/voltage than setting becomes useful.

Thanks.
 
Joined
Feb 12, 2006
Messages
2,296 (0.52/day)
Likes
419
System Name MONEY PIT
Processor i7-3770K @ 4800 1.20v batch #3231B415 Delided
Motherboard ASrock Z77 OC Formula w onboard waterblocks
Cooling Apogee HD, MCP655,rad MCR320-XP,Micro Rev2 res
Memory G,skill Trident X F3-2400C10D-16GTX
Video Card(s) EVGA GTX 980 Ti Classified with EK nickel/acetal waterblock installed
Storage 2x120gig Wildfire raid0 2x120gig VERTEX3 raid0
Display(s) 3/ Samsung2343bwx + 65in LG 4K
Case NZXT Phantom White w/red
Audio Device(s) ReCon3d fatal1ty pro, Logitech z906 THX
Power Supply corsair AX860i
Mouse Rat7
Software 64bit ++++ win 10
There seems to be a problem with the program's ability to adjust voltage on non-ref 5870 cards. In particular, my Vapor-X 5870 rev-2.

When Trixx first came out I was glad that I had found a program that had unlocked my voltage control,though at the time I didn't really need it, recently I wanted to use it but found out that the gpu voltage slider was not functioning or not responding. I downloaded the latest version which is the current one and it seemed to work the first time I launched the program, but when I re-opened it, the slider was not functioning once again.

Just something I wanted to make the developer aware of.
use version #3;)
 
Joined
Aug 15, 2011
Messages
5 (0.00/day)
Likes
0
the only version that has worked for me so far is 3.0.5 and even that isn't perfect since it will work in the beginning and then after awhile without restarting the PC or anything, it will just stop overvolting. Then the next day it will work again, or if I reinstall the latest version and then go back to the 3.0.5.

I've tried all of the versions and there isn't a single one that has a constantly working gpu voltage control for the 5870.

One thing i've noticed is that whenever the voltage control works, in GPU-Z there will be an extra sensor present right under VDDC. It's called VDDC Current % OCP. It doesn't show anything but when it's simply present, it means I can overvlolt, when it isn't then I can't.
 
Last edited:
Joined
Feb 12, 2006
Messages
2,296 (0.52/day)
Likes
419
System Name MONEY PIT
Processor i7-3770K @ 4800 1.20v batch #3231B415 Delided
Motherboard ASrock Z77 OC Formula w onboard waterblocks
Cooling Apogee HD, MCP655,rad MCR320-XP,Micro Rev2 res
Memory G,skill Trident X F3-2400C10D-16GTX
Video Card(s) EVGA GTX 980 Ti Classified with EK nickel/acetal waterblock installed
Storage 2x120gig Wildfire raid0 2x120gig VERTEX3 raid0
Display(s) 3/ Samsung2343bwx + 65in LG 4K
Case NZXT Phantom White w/red
Audio Device(s) ReCon3d fatal1ty pro, Logitech z906 THX
Power Supply corsair AX860i
Mouse Rat7
Software 64bit ++++ win 10
VDDC Current % OCP should show all the time in gpu-z just
check gpu-z on the game rig ----your right my bad % ocp only shows when you can over volt my bad :nutkick::nutkick:
 
Last edited:
Joined
Feb 12, 2006
Messages
2,296 (0.52/day)
Likes
419
System Name MONEY PIT
Processor i7-3770K @ 4800 1.20v batch #3231B415 Delided
Motherboard ASrock Z77 OC Formula w onboard waterblocks
Cooling Apogee HD, MCP655,rad MCR320-XP,Micro Rev2 res
Memory G,skill Trident X F3-2400C10D-16GTX
Video Card(s) EVGA GTX 980 Ti Classified with EK nickel/acetal waterblock installed
Storage 2x120gig Wildfire raid0 2x120gig VERTEX3 raid0
Display(s) 3/ Samsung2343bwx + 65in LG 4K
Case NZXT Phantom White w/red
Audio Device(s) ReCon3d fatal1ty pro, Logitech z906 THX
Power Supply corsair AX860i
Mouse Rat7
Software 64bit ++++ win 10
Joined
Feb 12, 2006
Messages
2,296 (0.52/day)
Likes
419
System Name MONEY PIT
Processor i7-3770K @ 4800 1.20v batch #3231B415 Delided
Motherboard ASrock Z77 OC Formula w onboard waterblocks
Cooling Apogee HD, MCP655,rad MCR320-XP,Micro Rev2 res
Memory G,skill Trident X F3-2400C10D-16GTX
Video Card(s) EVGA GTX 980 Ti Classified with EK nickel/acetal waterblock installed
Storage 2x120gig Wildfire raid0 2x120gig VERTEX3 raid0
Display(s) 3/ Samsung2343bwx + 65in LG 4K
Case NZXT Phantom White w/red
Audio Device(s) ReCon3d fatal1ty pro, Logitech z906 THX
Power Supply corsair AX860i
Mouse Rat7
Software 64bit ++++ win 10
you could always do this if you'v got the stones:laugh:
 
Joined
Aug 15, 2011
Messages
5 (0.00/day)
Likes
0
you could always do this if you'v got the stones:laugh:
i've considered it, and I've even bought the resistors in case I decide to do it, but since there is a program that does the same thing, I don't think it's necessary. Even if there are still small issues that prevent it from functioning properly 100% of the time.
 
Joined
Aug 15, 2011
Messages
5 (0.00/day)
Likes
0
i uninstalled the drivers and installed the newest one, but the VDDC Currnet % OCP still doesn't show constantly.