• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

sapphire x1950pro problems

Joined
Nov 29, 2007
Messages
979 (0.16/day)
Location
Netherlands
My x1950pro 256MB is doin really weird.

When i play cod4 on high settings(2xAA 16xAF) i get a nice 30-35 fps average but when im playin for 10 minutes i hear my fan making more noise(its getting warmer ofcourse xD)but then my pc shuts off:(,when its on low settings i can play much longer before its shut off(this also happens with doom 3,ut3 and some other games).

I dont know why this is,i know that its getting ~80 degrees celsius while im gaming.is this because of my psu,heat or just a bad card.

I bought it second hand and i never overclocked the card and the guy where i bought it from didnt overclock it.

Please help me i will really apreciate it.

btw.my english is really bad so i think the grammar is messed up xD
 
Joined
Feb 12, 2007
Messages
1,192 (0.19/day)
Location
scotland
System Name spuds K8-X2
Processor amd athlon X2 4200+ toledo s939 2794mhz 254x11 1.4 vcore
Motherboard MSI K8N Neo4-F v1.0 (MS-7125) nforce4 sata2 mod, laptop cpu heatpipe copper nb cooler
Cooling akasa evo "blue" + 90mm fan, 2x120mm front, 250mm side, 120mm rear, 120mm in psu, pci slot exhaust.
Memory OCZ Platinum XTC DDR PC3200 4GB(4x1024) @254mhz 3-3-3-8 2T
Video Card(s) sapphire HD3870 512mb GDDR4 vf900cu, several ramsinks on components / nvidia 7300gt 256mb secondary
Storage hitachi 160gb (slightly fried) / hitachi 120gb ATA / Seagate 160gb / 2x ps3 seagate 60gb
Display(s) CTX EX1300F 20" flat CRT, 1280x1024@100hz / 19" benq FP91G X / 19" hanns-g (all free)
Case mesh server/gaming black case, 9x 5.25' drive bays, silvestone auto fan controller
Audio Device(s) onboard realtek alc850 7.1/soundblaster LIVE! ct4780 + kxaudio - sony home theatre surround
Power Supply winpower 650w, system draws around 470-500w under load(+all screens)
Software win7 64bit
Benchmark Scores ~16m trips/sec using mty trip generator. triple monitor gaming using SoftTH. 3840x1024
check thermal paste, might need reapplied, on my mates one i used slightly stronger springs on back screws to help with contact too,
 
Joined
Nov 29, 2007
Messages
979 (0.16/day)
Location
Netherlands
i dont have any new thermal paste atm but it looked fine.
 
Top