- Joined
- Dec 24, 2010
- Messages
- 96 (0.02/day)
Processor | Intel i7-4770k (Malaysia) |
---|---|
Motherboard | GIGABYTE GA-Z97M-D3H |
Cooling | Stock (as yet) |
Memory | Kingston Technology HyperX Beast 2x8GB DDR3-2400MHz Kit |
Video Card(s) | MSI GTX 980 Ti Reference |
Storage | Kingston HyperX Fury 240GB + assorted green HDDs (1.5TB) |
Display(s) | Samsung SyncMaster B2230H (1080p) & Samsung 40" HDTV (1080p) |
Case | Phantek Enthoo Pro |
Audio Device(s) | On board |
Power Supply | Cooler Master GX 750W |
Mouse | Logitech G502 Proteus Core |
Keyboard | Topre Realforce 55g TKL, Lightsaver v2 w/ G.Blues, GH60_RevCHN w/ G.Clears, Ergodox w/ JHB |
Software | Windows 8.1 64-bit |
Hello people...
I'm now faced with a challenge of sorts...
Basically, my home has a pretty nice LAN infrastructure (which I intend to semi/fully utilize) from one single room to all others. Let's call this the server room. In a nutshell, the layout is kinda like this:
https://docs.google.com/drawings/d/15Ok7MoTqF0vy28c7Ldk9yO-H_cPK6A_PE3kyaYLf4Uw/edit?usp=sharing
Here's the tricky part: my cable installer and my house-sitter messed up. They installed the cable in the right room, but not at where the cables were installed. Now unless I rip apart the cement wall (again!) and re-lay the cables, it is virtually impossible to place the modem at or even near the cables.
My question now would be: How in the world do I connect the network and wifi together to form a single cohesive network without running a CAT6 cable on the floor between my router and my modem?
My objective would be to have everything connected either by LAN or wifi.
Is there any way to do this? I'm posting from work so I can't really take pictures as to how messed up the layout is right now.
I'm now faced with a challenge of sorts...
Basically, my home has a pretty nice LAN infrastructure (which I intend to semi/fully utilize) from one single room to all others. Let's call this the server room. In a nutshell, the layout is kinda like this:
https://docs.google.com/drawings/d/15Ok7MoTqF0vy28c7Ldk9yO-H_cPK6A_PE3kyaYLf4Uw/edit?usp=sharing
Here's the tricky part: my cable installer and my house-sitter messed up. They installed the cable in the right room, but not at where the cables were installed. Now unless I rip apart the cement wall (again!) and re-lay the cables, it is virtually impossible to place the modem at or even near the cables.
My question now would be: How in the world do I connect the network and wifi together to form a single cohesive network without running a CAT6 cable on the floor between my router and my modem?
My objective would be to have everything connected either by LAN or wifi.
Is there any way to do this? I'm posting from work so I can't really take pictures as to how messed up the layout is right now.
Last edited: