Shadow Of The Tomb Raider - CPU Performance and general game benchmark discussions

[Det0x]

There are more games to compare. This game favors AMD more. My binned 10900k in f1 2020 and metro exodus 2033

http://imgur.com/a/dSHgSG3

Aren't your 5950x also binned ?

Spoiler: Anyway here are my F1 + Metro scores:

Zen 3 seems just as strong compared to everything else in these game benches also. (?)

Have saved all my new game benchmarks here so i have a comparison against Alderlake and Zen3 V-cache when they get released

http://imgur.com/a/4K9Zob0

 

[mrthanhnguyen]

I bought from CENS.

 

[Taraquin]

My decent lowest result
View attachment 221039

My modest highest result
View attachment 221040

Post your zentimings and we can help you tweak if you want? My 3600 with 3733 micron rev E did about 155fps cpu game avg fps and with 3733 B-die it did 165fps 1080p highest. Even with budget ram like rev E you can improve performance by 40% if you want?

 

[Udyr]

Post your zentimings and we can help you tweak if you want? My 3600 with 3733 micron rev E did about 155fps cpu game avg fps and with 3733 B-die it did 165fps 1080p highest. Even with budget ram like rev E you can improve performance by 40% if you want?

 

[Taraquin]

Do you know what die your ram is? You can download thaiphoon burner and read spd, there it will say for instance hynix A, Micron B etc.

General tip, try setting speed to 3200 and infinity fabric 1600, all timings on auto, continiue to raise it until it won't boot. Reset bios and go back to last config that booted, then you can begin to tweak timings

 

[Udyr]

Do you know what die your ram is? You can download thaiphoon burner and read spd, there it will say for instance hynix A, Micron B etc.

General tip, try setting speed to 3200 and infinity fabric 1600, all timings on auto, continiue to raise it until it won't boot. Reset bios and go back to last config that booted, then you can begin to tweak timings

Hynix A

 

[Taraquin]

Hynix A

Okay, usual max for Hynix A is 3200-3600. Try 3600/1800 and all timings on auto, if it dont boot try 3533/1766, 3466/1733 etc. Once you find highest speed try the following safe settings: ram volt at 1.45V, cl 16, trcdrd 20, trcwr 8, tRP 20, tRAS 40, tRC 60, tFAW 32, trrds 8, trrdl 10, twr 16, trtp 8, tRFC 480, scl's 4, twtrs 4, twtrl 12, rest at auto, set gear down mode on. You might be able to run tighter timings, try this first

 

[Det0x]

Seems like i have to wait for Alder lake for someone else to cross the 300 fps line and i can start pushing again..
My old record with everything maxed and not stable was 314 average cpu fps i think, with these new memory stick and settings it should be good for ~320-330 fps when running bench settings
Looking forward what the 5950 xt 3dnow! edition can do in this bench when i get it

mrthanhnguyen also broke the 300fps barrier, so had to do a new run with daily 24/7 settings

339 cpu average fps

Recorded also a video for those who want to know see what kinda fps is needed for these average fps numbers

*edit*
Seems there was a new patch for SotTR releasted yesterday. Don't know how/if this affects performance!

 

[Taraquin]

Got a new patch yesterday. performance on CPU game avg is up by almost 30 fps This is run with 5600X CO + 200MHz pbo, MB-limits, 4000cl16 ram and 1T The best I have got earlier with this setting was 237 fps

mrthanhnguyen also broke the 300fps barrier, so had to do a new run with daily 24/7 settings

339 cpu average fps
View attachment 221388

Recorded also a video for those who want to know see what kinda fps is needed for these average fps numbers

They released a patch yesterday I think which boosted peformance by 10% atleast in Windows 10

 

[Felix123BU]

Got a new patch yesterday. performance on CPU game avg is up by almost 30 fps This is run with 5600X CO + 200MHz pbo, MB-limits, 4000cl16 ram and 1T The best I have got earlier with this setting was 237 fps
View attachment 221405


They released a patch yesterday I think which boosted peformance by 10% atleast in Windows 10

Hmm, that's the same amount of extra FPS I got first in Windows 11 in this bench, which makes me think that some extra performance for Ryzen CPU's was always on the table, but for years Microsoft did not bother to optimize the W10 system too much, and now the gains from Windows 11 trickle down to Windows 10....

 

[Det0x]

Hmm, that's the same amount of extra FPS I got first in Windows 11 in this bench, which makes me think that some extra performance for Ryzen CPU's was always on the table, but for years Microsoft did not bother to optimize the W10 system too much, and now the gains from Windows 11 trickle down to Windows 10....

Nizzen got same ~ +30 fps gain on windows11

 

[Felix123BU]

Nizzen got same ~ +30 fps gain on windows11

That's weird, I was just now looking at that result before seeing this post and asking myself if that's you

 

[harm9963]

Nice bump from 240 to 246

 

[Det0x]

My new windows11 install

 

[phanbuey]

Those fps numbers don't even make sense anymore.

 

[harm9963]

like fine wine

 

[mrthanhnguyen]

water temp is too high and figure out it would crash in f1 so lower setting a bit and got these. F1 is so demanding like Battlefield series. Sotr is not that demanding.

 

[Taraquin]

Hmm, that's the same amount of extra FPS I got first in Windows 11 in this bench, which makes me think that some extra performance for Ryzen CPU's was always on the table, but for years Microsoft did not bother to optimize the W10 system too much, and now the gains from Windows 11 trickle down to Windows 10....

I wonder what goes on in Win11 that gives the 10% boost vs Win10. It seems the patch boosted both 10 and 11 by around 10%.

 

[natr0n]

Newest update removes Denovo. Should get higher fps now.

 

[Taraquin]

water temp is too high and figure out it would crash in f1 so lower setting a bit and got these. F1 is so demanding like Battlefield series. Sotr is not that demanding.


View attachment 221448View attachment 221449

You run allcore OC or curve optimizer? I really recommend the latter

Newest update removes Denovo. Should get higher fps now.

That makes sense, but Denovo causing 10% fps drop is very high!

 

[mrthanhnguyen]

You run allcore OC or curve optimizer? I really recommend the latter


That makes sense, but Denovo causing 10% fps drop is very high!

Hydra.

 

[Felix123BU]

Anybody got the W11 update that should to fix L3? Was supposed to come out today.

 

[harm9963]

240 old vs 251 now

 

[mrthanhnguyen]

35c water. Will try again with cold water.

 

[Felix123BU]

35c water. Will try again with cold water.

View attachment 221505View attachment 221506

And the fight is ON!