• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Share your AIDA 64 cache and memory benchmark here

Joined
Jul 21, 2018
Messages
773 (0.37/day)
Location
Germany
System Name FATTYDOVE-R-SPEC
Processor Intel i9 10980XE
Motherboard EVGA X299 Dark
Cooling Water (1x 240mm, 1x 280mm, 1x 420mm + 2x Mo-Ra 360 external radiator)
Memory 64GB DDR4
Video Card(s) RTX 2080 Super / RTX 3090
Storage Crucial MX500
Display(s) 24", 1440p, freesync, 144hz
Case Open Benchtable (OBT)
Audio Device(s) beyerdynamic MMX 300
Power Supply EVGA Supernova T2 1600W
Mouse OG steelseries Sensei
Keyboard steelseries 6Gv2
Software Windows 10
So my Quad-Channel can't go too low with latency, atleast not on my daily settings. But the bandwidth is ok.

AIDA quad 4000 CL15.PNG


Moved here from the competition thread, I clicked the wrong title <-<
 
Joined
Jul 21, 2018
Messages
773 (0.37/day)
Location
Germany
System Name FATTYDOVE-R-SPEC
Processor Intel i9 10980XE
Motherboard EVGA X299 Dark
Cooling Water (1x 240mm, 1x 280mm, 1x 420mm + 2x Mo-Ra 360 external radiator)
Memory 64GB DDR4
Video Card(s) RTX 2080 Super / RTX 3090
Storage Crucial MX500
Display(s) 24", 1440p, freesync, 144hz
Case Open Benchtable (OBT)
Audio Device(s) beyerdynamic MMX 300
Power Supply EVGA Supernova T2 1600W
Mouse OG steelseries Sensei
Keyboard steelseries 6Gv2
Software Windows 10
Sorry for posting again so quickly but that 100GB/s write mark was so close, I just had to make it work.

Small improvements on the subtimings, another tick down on read-to-write delay and I got it:
AIDA 4000 CL15 new subtimings.PNG


NB is still 3.1 GHz it just dropped to idle clock.
 
Joined
Oct 8, 2015
Messages
713 (0.23/day)
Location
Earth's Troposphere
System Name 3 "rigs"-gaming/spare pc/cruncher
Processor R7-5800X3D/i7-7700K/R9-7950X
Motherboard Asus ROG Crosshair VI Extreme/Asus Ranger Z170/Asus ROG Crosshair X670E-GENE
Cooling Bitspower monoblock ,custom open loop,both passive and active/air tower cooler/air tower cooler
Memory 32GB DDR4/32GB DDR4/64GB DDR5
Video Card(s) Gigabyte RX6900XT Alphacooled/AMD RX5700XT 50th Aniv./SOC(onboard)
Storage mix of sata ssds/m.2 ssds/mix of sata ssds+an m.2 ssd
Display(s) Dell UltraSharp U2410 , HP 24x
Case mb box/Silverstone Raven RV-05/CoolerMaster Q300L
Audio Device(s) onboard/onboard/onboard
Power Supply 3 Seasonics, a DeltaElectronics, a FractalDesing
Mouse various/various/various
Keyboard various wired and wireless
VR HMD -
Software W10.someting or another,all 3
@Dinnercore quick , someone stop him , unplug the ram chiller or something.
Superb.
 
Joined
Jul 21, 2018
Messages
773 (0.37/day)
Location
Germany
System Name FATTYDOVE-R-SPEC
Processor Intel i9 10980XE
Motherboard EVGA X299 Dark
Cooling Water (1x 240mm, 1x 280mm, 1x 420mm + 2x Mo-Ra 360 external radiator)
Memory 64GB DDR4
Video Card(s) RTX 2080 Super / RTX 3090
Storage Crucial MX500
Display(s) 24", 1440p, freesync, 144hz
Case Open Benchtable (OBT)
Audio Device(s) beyerdynamic MMX 300
Power Supply EVGA Supernova T2 1600W
Mouse OG steelseries Sensei
Keyboard steelseries 6Gv2
Software Windows 10
Joined
Mar 22, 2019
Messages
461 (0.25/day)
Location
Western NY, USA
Processor AMD Ryzen 7 3700x
Motherboard Asus ROG Strix X470-F Gaming
Cooling Scythe Ninja 5
Memory G.Skill Ripjaws V 16GB (2 x 8GB) (F4-3600C16D-16GVKC) @ 3733 MHz 16-19-19-19-36-56
Video Card(s) MSI RTX 2060 Super Armor OC 8GB
Storage 1x Samsung 970 EVO 500GB / 3x Crucial MX500 / 4 HDDs
Display(s) Dell 23" LCD S2316M
Case Rosewill Rise Glow
Power Supply CORSAIR RM650
Mouse Cooler Master MS120
Keyboard Cooler Master MS120
Software Windows 10 Pro x64
Sorry for posting again so quickly but that 100GB/s write mark was so close, I just had to make it work.

Small improvements on the subtimings, another tick down on read-to-write delay and I got it:
View attachment 157949

NB is still 3.1 GHz it just dropped to idle clock.
I am seriously jealous !!!!!
 
Joined
Jul 14, 2006
Messages
2,405 (0.37/day)
Location
People's Republic of America
System Name It's just a computer
Processor i9-9900K Direct Die
Motherboard eVGA Z390 Dark
Cooling Dual D5T Vario, XSPC BayRes, Nemesis GTR560, NF-A14-iPPC3000PWM, NF-A14-iPPC2000, HK IV Pro Nickel
Memory G.Skill F4-4500C19D-16GTZKKE or G.Skill F4-3600C16D-16GTZ or G.Skill F4-4000C19D-32GTZSW
Video Card(s) eVGA RTX2080 FTW3 Ultra
Storage Samsung 960 EVO M.2
Display(s) LG 32GK650F
Case Thermaltake Xaser VI
Audio Device(s) Auzentech X-Meridian 7.1 2G/Z-5500
Power Supply Seasonic Prime PX-1300
Mouse Logitech
Keyboard Logitech
Software Win7 Ultimate x64 SP1
cachemem 6-8-20.JPG


Been trying to get Copy into the 60s with Read and Write at 24/7 settings; 50x CPU multiplier, 100MHz BClk, 47x Ring multiplier.
 
Joined
Jul 21, 2018
Messages
773 (0.37/day)
Location
Germany
System Name FATTYDOVE-R-SPEC
Processor Intel i9 10980XE
Motherboard EVGA X299 Dark
Cooling Water (1x 240mm, 1x 280mm, 1x 420mm + 2x Mo-Ra 360 external radiator)
Memory 64GB DDR4
Video Card(s) RTX 2080 Super / RTX 3090
Storage Crucial MX500
Display(s) 24", 1440p, freesync, 144hz
Case Open Benchtable (OBT)
Audio Device(s) beyerdynamic MMX 300
Power Supply EVGA Supernova T2 1600W
Mouse OG steelseries Sensei
Keyboard steelseries 6Gv2
Software Windows 10
I'm spamming this thread but I can't stop tweaking:

Found out I can use 1T just as well, also cut down the refresh cycles more aggressive.
1T command rate aida plus memtestjpg.jpg


Despite AIDA reading 4000 I'm on 4088 now thanks to BCLK adjustment. Straight up 4200 seems to upset my CPU's IMC which I limited to 1.2V. The auto-setting suggests 1.33V but I'm not sure if I want to go that high on this CPU.

1T command rate memtestjpg.jpg
 
Joined
Aug 14, 2014
Messages
190 (0.05/day)
Location
France
Processor 5800X3D
Motherboard MSI Prestige X570 Creation
Cooling Corsair Hydro H100i RGB Platinum SE
Memory Kingston 32Go 3600MHz
Video Card(s) Nvidia 4090
Display(s) Asus XG27UQ + Asus PG279Q
Case Corsair Obsidian 750D
Power Supply Corsair RM850x White
Anyone with a 3950X?
Coming from a 7700K, it's a life-changing upgrade.
I feel like my memory latency is insane. Granted, this is from a 64 GB 3600 C18 kit that I just moved to 4133 with the same timings, but still...
cachemem.png
 
Joined
Jul 21, 2018
Messages
773 (0.37/day)
Location
Germany
System Name FATTYDOVE-R-SPEC
Processor Intel i9 10980XE
Motherboard EVGA X299 Dark
Cooling Water (1x 240mm, 1x 280mm, 1x 420mm + 2x Mo-Ra 360 external radiator)
Memory 64GB DDR4
Video Card(s) RTX 2080 Super / RTX 3090
Storage Crucial MX500
Display(s) 24", 1440p, freesync, 144hz
Case Open Benchtable (OBT)
Audio Device(s) beyerdynamic MMX 300
Power Supply EVGA Supernova T2 1600W
Mouse OG steelseries Sensei
Keyboard steelseries 6Gv2
Software Windows 10
Anyone with a 3950X?
Coming from a 7700K, it's a life-changing upgrade.
I feel like my memory latency is insane. Granted, this is from a 64 GB 3600 C18 kit that I just moved to 4133 with the same timings, but still...View attachment 159107
Maybe try running 3600 or 3733 with tighter timings to sync better with fabric clock of 1800 or 1866 MHz.
 
Joined
Dec 31, 2009
Messages
19,366 (3.72/day)
Benchmark Scores Faster than yours... I'd bet on it. :)
Maybe try running 3600 or 3733 with tighter timings to sync better with fabric clock of 1800 or 1866 MHz.
Exactly.

You should be in the upper 60ns latency when it's tied 1:1 with IF.

This platform isn't intel so latency will always be higher. On z490 ddr4 3600 is upper 40ns latency. You won't get much if at all above 3800 while matching 1:1 to reduce that latency.

I suggest reading an oc guide so you know whats going on. :)
 

johnspack

Here For Good!
Joined
Oct 6, 2007
Messages
5,980 (0.99/day)
Location
Nelson B.C. Canada
System Name System2 Blacknet , System1 Blacknet2
Processor System2 Threadripper 1920x, System1 2699 v3
Motherboard System2 Asrock Fatality x399 Professional Gaming, System1 Asus X99-A
Cooling System2 Noctua NH-U14 TR4-SP3 Dual 140mm fans, System1 AIO
Memory System2 64GBS DDR4 3000, System1 32gbs DDR4 2400
Video Card(s) System2 GTX 980Ti System1 GTX 970
Storage System2 4x SSDs + NVme= 2.250TB 2xStorage Drives=8TB System1 3x SSDs=2TB
Display(s) 2x 24" 1080 displays
Case System2 Some Nzxt case with soundproofing...
Audio Device(s) Asus Xonar U7 MKII
Power Supply System2 EVGA 750 Watt, System1 XFX XTR 750 Watt
Mouse Logitech G900 Chaos Spectrum
Keyboard Ducky
Software Manjaro, Windows 10, Kubuntu 23.10
Benchmark Scores It's linux baby!
Wow, my old xeon is starting to show it's age....
 
Joined
Oct 8, 2015
Messages
713 (0.23/day)
Location
Earth's Troposphere
System Name 3 "rigs"-gaming/spare pc/cruncher
Processor R7-5800X3D/i7-7700K/R9-7950X
Motherboard Asus ROG Crosshair VI Extreme/Asus Ranger Z170/Asus ROG Crosshair X670E-GENE
Cooling Bitspower monoblock ,custom open loop,both passive and active/air tower cooler/air tower cooler
Memory 32GB DDR4/32GB DDR4/64GB DDR5
Video Card(s) Gigabyte RX6900XT Alphacooled/AMD RX5700XT 50th Aniv./SOC(onboard)
Storage mix of sata ssds/m.2 ssds/mix of sata ssds+an m.2 ssd
Display(s) Dell UltraSharp U2410 , HP 24x
Case mb box/Silverstone Raven RV-05/CoolerMaster Q300L
Audio Device(s) onboard/onboard/onboard
Power Supply 3 Seasonics, a DeltaElectronics, a FractalDesing
Mouse various/various/various
Keyboard various wired and wireless
VR HMD -
Software W10.someting or another,all 3
Just about topped out with the 1:1 ratio between Fclk:Mclk
Annotation 2020-06-18 123605.png
 
Joined
Sep 9, 2009
Messages
1,168 (0.22/day)
Location
Austria, Europe
System Name Bang4Buck
Processor AMD Ryzen 9 5900x
Motherboard MSI PRESTIGE x570 CREATION
Cooling Fractal Design Celsius S36
Memory 32Gb 4400Mhz Patriot Viper Steel(Samsung B-die) @ 3800Mhz 16-16-16-32-48-1T @ 1.38v
Video Card(s) MSI RTX 3080 Ti Suprim X
Storage Adata SX8200Pro 512Gb/2x Crucial P1 1Tb/Samsung 840 EVO/6Tb Raid -HGST Enterprise/2x IronWolf 8Tb/
Display(s) Samsung UE49KS8002 4K HDR TV (US - 9 series)
Case Fractal Design Define R6 Black Usb-C
Audio Device(s) HDMI out to Denon X4400H reciever, 2x Dali Zensor 7, Dali Zensor Vokal, 2x Dali Zensor 1, Yamaha Sub
Power Supply Seasonic Prime Ultra 750W
Mouse Logitech G305 Lightspeed
Keyboard Logitech K520
Software Windows 11 Pro x64
Benchmark Scores https://www.3dmark.com/spy/26216445
Joined
Oct 8, 2015
Messages
713 (0.23/day)
Location
Earth's Troposphere
System Name 3 "rigs"-gaming/spare pc/cruncher
Processor R7-5800X3D/i7-7700K/R9-7950X
Motherboard Asus ROG Crosshair VI Extreme/Asus Ranger Z170/Asus ROG Crosshair X670E-GENE
Cooling Bitspower monoblock ,custom open loop,both passive and active/air tower cooler/air tower cooler
Memory 32GB DDR4/32GB DDR4/64GB DDR5
Video Card(s) Gigabyte RX6900XT Alphacooled/AMD RX5700XT 50th Aniv./SOC(onboard)
Storage mix of sata ssds/m.2 ssds/mix of sata ssds+an m.2 ssd
Display(s) Dell UltraSharp U2410 , HP 24x
Case mb box/Silverstone Raven RV-05/CoolerMaster Q300L
Audio Device(s) onboard/onboard/onboard
Power Supply 3 Seasonics, a DeltaElectronics, a FractalDesing
Mouse various/various/various
Keyboard various wired and wireless
VR HMD -
Software W10.someting or another,all 3
@heky
It's ram from the yee old days of grandpa Skylake , this on the fun side note.
I got it booting a couple times at 3333mhz 1:1 and benched it with the read numbers beeing in the same mid 47k MB's while latencies at 71ns access times, not at all game stable and this was back in the days in which I had no clue the mb was 35 mV overvolting whatever it was set in the bios for Dram voltage , I've put trough these sticks 1.55v with no results, notw them dimms are at a "balmy 1.365 too 1.38V.
All in all considering it's a B350 Chipset mb !.
Le: yeah it's that "bad" , £65 MB , £30 RAM , heck load of fun.
 
Joined
Nov 4, 2015
Messages
196 (0.06/day)
Location
Dutchland
Processor Ryzen 3600x
Motherboard MPG B550 GAMING PLUS
Cooling Gamdias AIO 3x
Memory 32768 MB Corsair 8192 MB (DDR4-3200)
Video Card(s) RX 6750 XT (RTX 2060)
Storage Samsung SSD 990 PRO 1TB/Samsung SSD 970 EVO 500GB
Display(s) 2x AOC 27G2G8 (AOC2702) 27.2 inches (69.1 cm) / 1920 x 1080 pixels @ 48-240 (curved)
Mouse No idea brand
Keyboard Same as above
Software Win11 Pro
lol :pimp:
 

Attachments

  • Naamloos-1.jpg
    Naamloos-1.jpg
    334 KB · Views: 390
Joined
Sep 4, 2019
Messages
14 (0.01/day)
Because of the board, i cant go any higher than 3900MHz... Even with 1.6V RAM 1.35V SA/IO and CL20 i cannot even boot^^
It is a T-Tpopogy Board and i have only 2 dimms, this is pretty much the best i could do with that crap board...
 

Attachments

  • Aida Mem Bench best.png
    Aida Mem Bench best.png
    820.7 KB · Views: 294
  • Aida Mem Bench best2.png
    Aida Mem Bench best2.png
    119.3 KB · Views: 286

Tatty_Two

Gone Fishing
Joined
Jan 18, 2006
Messages
25,793 (3.88/day)
Location
Worcestershire, UK
Processor Rocket Lake Core i5 11600K @ 5 Ghz with PL tweaks
Motherboard MSI MAG Z490 TOMAHAWK
Cooling Thermalright Peerless Assassin 120SE + 4 Phanteks 140mm case fans
Memory 32GB (4 x 8GB SR) Patriot Viper Steel 4133Mhz DDR4 @ 3600Mhz CL14@1.45v Gear 1
Video Card(s) Asus Dual RTX 4070 OC
Storage WD Blue SN550 1TB M.2 NVME//Crucial MX500 500GB SSD (OS)
Display(s) AOC Q2781PQ 27 inch Ultra Slim 2560 x 1440 IPS
Case Phanteks Enthoo Pro M Windowed - Gunmetal
Audio Device(s) Onboard Realtek ALC1200/SPDIF to Sony AVR @ 5.1
Power Supply Seasonic CORE GM650w Gold Semi modular
Mouse Coolermaster Storm Octane wired
Keyboard Element Gaming Carbon Mk2 Tournament Mech
Software Win 10 Home x64
Just got these yesterday now showing in my specs, this is just a quick run at XMP, been playing around a bit but can't decide if it's best to run them at 4133mhz CL17 2T or 4000mhz same timings but @1T, both at 1.4v, this is just for starters (hopefully), when I have more time I wanna tweak more at higher speeds and tighten more at lower to find the best balance, want to try and keep within 1.45v, ...………..
 

Attachments

  • AIDA64.jpg
    AIDA64.jpg
    150.9 KB · Views: 1,037

Tatty_Two

Gone Fishing
Joined
Jan 18, 2006
Messages
25,793 (3.88/day)
Location
Worcestershire, UK
Processor Rocket Lake Core i5 11600K @ 5 Ghz with PL tweaks
Motherboard MSI MAG Z490 TOMAHAWK
Cooling Thermalright Peerless Assassin 120SE + 4 Phanteks 140mm case fans
Memory 32GB (4 x 8GB SR) Patriot Viper Steel 4133Mhz DDR4 @ 3600Mhz CL14@1.45v Gear 1
Video Card(s) Asus Dual RTX 4070 OC
Storage WD Blue SN550 1TB M.2 NVME//Crucial MX500 500GB SSD (OS)
Display(s) AOC Q2781PQ 27 inch Ultra Slim 2560 x 1440 IPS
Case Phanteks Enthoo Pro M Windowed - Gunmetal
Audio Device(s) Onboard Realtek ALC1200/SPDIF to Sony AVR @ 5.1
Power Supply Seasonic CORE GM650w Gold Semi modular
Mouse Coolermaster Storm Octane wired
Keyboard Element Gaming Carbon Mk2 Tournament Mech
Software Win 10 Home x64
A first stab, managed to get them at 4133mhz @ 17-17-17-34 @2T on 1.4v, rebooted and ran a couple of stress tests and a game for a couple of hours, then went back into Bios and noticed that the SA voltage was on auto and showing 1.45v!! :eek: and VCCIO was at 1.3v, manually dropped them to 1.20v each and saw a minor performance improvement, still a lot to test but need more time, CPU at stock as I like to let the Thermal paste bed in for a couple of weeks, surprisingly CPU voltage on auto currently and reacting very well, rarely even hits 1.3v in any threaded scenario and with that running cool on a middle of the road 240mm AIO, highest multithreaded temps of 65c ...……...

4133 17-17-17-34.jpg


Edit: Got 4000mhz stable at CL16-17-17-34 2T @ 1.4V but slightly lower scores so will stick with the 4133mhz CL17 for now.
 
Last edited:
Joined
Aug 14, 2014
Messages
190 (0.05/day)
Location
France
Processor 5800X3D
Motherboard MSI Prestige X570 Creation
Cooling Corsair Hydro H100i RGB Platinum SE
Memory Kingston 32Go 3600MHz
Video Card(s) Nvidia 4090
Display(s) Asus XG27UQ + Asus PG279Q
Case Corsair Obsidian 750D
Power Supply Corsair RM850x White
Exactly.

You should be in the upper 60ns latency when it's tied 1:1 with IF.

This platform isn't intel so latency will always be higher. On z490 ddr4 3600 is upper 40ns latency. You won't get much if at all above 3800 while matching 1:1 to reduce that latency.

I suggest reading an oc guide so you know whats going on. :)
Unfortunately this is the best I could do :(
cachemem7.png
 

Mobile_Kimchee

New Member
Joined
Jul 7, 2020
Messages
2 (0.00/day)
Hey all, I'm new to this but any help would be greatly appreciated! This is my first attempt at overclocking my ram manually and my head is about to explode. I think I squeezed out as much as I can but really don't know. I am stable with these setting 2 hours of Karhu memtest and 12 hours of aida 64.
MSI Godlike Z390
Intel I9 9900k
EVGA 2080 TI xc
Corsair Dominator RGB Platinum DDR4 4000 C19 (2x16) have 4 sticks but cant get all 4 to post @4000MHz
EKWB water cooled CPU and GPU
2 x 1 TB Samsung 970 plus
 

Attachments

  • Screenshot (9).png
    Screenshot (9).png
    726 KB · Views: 171
Joined
Aug 6, 2017
Messages
7,412 (3.05/day)
Location
Poland
System Name Purple rain
Processor 10.5 thousand 4.2G 1.1v
Motherboard Zee 490 Aorus Elite
Cooling Noctua D15S
Memory 16GB 4133 CL16-16-16-31 Viper Steel
Video Card(s) RTX 2070 Super Gaming X Trio
Storage SU900 128,8200Pro 1TB,850 Pro 512+256+256,860 Evo 500,XPG950 480, Skyhawk 2TB
Display(s) Acer XB241YU+Dell S2716DG
Case P600S Silent w. Alpenfohn wing boost 3 ARGBT+ fans
Audio Device(s) K612 Pro w. FiiO E10k DAC,W830BT wireless
Power Supply Superflower Leadex Gold 850W
Mouse G903 lightspeed+powerplay,G403 wireless + Steelseries DeX + Roccat rest
Keyboard HyperX Alloy SilverSpeed (w.HyperX wrist rest),Razer Deathstalker
Software Windows 10
Benchmark Scores A LOT
A first stab, managed to get them at 4133mhz @ 17-17-17-34 @2T on 1.4v, rebooted and ran a couple of stress tests and a game for a couple of hours, then went back into Bios and noticed that the SA voltage was on auto and showing 1.45v!! :eek: and VCCIO was at 1.3v, manually dropped them to 1.20v each and saw a minor performance improvement, still a lot to test but need more time, CPU at stock as I like to let the Thermal paste bed in for a couple of weeks, surprisingly CPU voltage on auto currently and reacting very well, rarely even hits 1.3v in any threaded scenario and with that running cool on a middle of the road 240mm AIO, highest multithreaded temps of 65c ...……...

View attachment 160597

Edit: Got 4000mhz stable at CL16-17-17-34 2T @ 1.4V but slightly lower scores so will stick with the 4133mhz CL17 for now.
here's mine,same sticks,same settings
did you try lowering trfc ?

aida.jpg
 

Tatty_Two

Gone Fishing
Joined
Jan 18, 2006
Messages
25,793 (3.88/day)
Location
Worcestershire, UK
Processor Rocket Lake Core i5 11600K @ 5 Ghz with PL tweaks
Motherboard MSI MAG Z490 TOMAHAWK
Cooling Thermalright Peerless Assassin 120SE + 4 Phanteks 140mm case fans
Memory 32GB (4 x 8GB SR) Patriot Viper Steel 4133Mhz DDR4 @ 3600Mhz CL14@1.45v Gear 1
Video Card(s) Asus Dual RTX 4070 OC
Storage WD Blue SN550 1TB M.2 NVME//Crucial MX500 500GB SSD (OS)
Display(s) AOC Q2781PQ 27 inch Ultra Slim 2560 x 1440 IPS
Case Phanteks Enthoo Pro M Windowed - Gunmetal
Audio Device(s) Onboard Realtek ALC1200/SPDIF to Sony AVR @ 5.1
Power Supply Seasonic CORE GM650w Gold Semi modular
Mouse Coolermaster Storm Octane wired
Keyboard Element Gaming Carbon Mk2 Tournament Mech
Software Win 10 Home x64
No, not had the time to play with them anymore yet, might get some this Saturday, I just dialled those in when I installed the sticks because I knew they would work, damn this retirement business is busy! Will try and have a go this weekend.
 
Joined
Aug 6, 2017
Messages
7,412 (3.05/day)
Location
Poland
System Name Purple rain
Processor 10.5 thousand 4.2G 1.1v
Motherboard Zee 490 Aorus Elite
Cooling Noctua D15S
Memory 16GB 4133 CL16-16-16-31 Viper Steel
Video Card(s) RTX 2070 Super Gaming X Trio
Storage SU900 128,8200Pro 1TB,850 Pro 512+256+256,860 Evo 500,XPG950 480, Skyhawk 2TB
Display(s) Acer XB241YU+Dell S2716DG
Case P600S Silent w. Alpenfohn wing boost 3 ARGBT+ fans
Audio Device(s) K612 Pro w. FiiO E10k DAC,W830BT wireless
Power Supply Superflower Leadex Gold 850W
Mouse G903 lightspeed+powerplay,G403 wireless + Steelseries DeX + Roccat rest
Keyboard HyperX Alloy SilverSpeed (w.HyperX wrist rest),Razer Deathstalker
Software Windows 10
Benchmark Scores A LOT
No, not had the time to play with them anymore yet, might get some this Saturday, I just dialled those in when I installed the sticks because I knew they would work, damn this retirement business is busy! Will try and have a go this weekend.
default trfc is 550
I dialled 400 and it works.shaved off almost 4ns off your result with a lower ring bus cpu so you may get even lower
update: got them to run 4133 16-16-16-31 at 1.45v,still at 41ns,40ns will be hard to break
 
Last edited:
Top