Share your CPUZ Benchmarks!

[phanbuey]

Challenge accepted.

Intel Core i5 12600K @ 5521.5 MHz - CPU-Z VALIDATOR (x86.fr)

12600k is a nutty chip. If I had better cooling this would run at 5.6 Problem is there are no auto voltage profiles at 55/56x and none of the stock ones work with high bclk so it's hard to put a backoff in to get 5.6 on 2 cores and 5.4 on all core. volts stick at max ratio volts all the time.

 

[fevgatos]

Challenge accepted.

View attachment 262954
Intel Core i5 12600K @ 5521.5 MHz - CPU-Z VALIDATOR (x86.fr)

View attachment 262955


12600k is a nutty chip. If I had better cooling this would run at 5.6 Problem is there are no auto voltage profiles at 55/56x and none of the stock ones work with high bclk so it's hard to put a backoff in to get 5.6 on 2 cores and 5.4 on all core. volts stick at max ratio volts all the time.

Can the 12900k participate? Got you both at 927

 

[phanbuey]

Can the 12900k participate? Got you both at 927

Turn that 9 upside down - are you going to go for the 13900K?

 

[fevgatos]

Turn that 9 upside down - are you going to go for the 13900K?

Probably not, unless it hits some uber mega oc clocks, i dont really see the point. Id rather wait for meteor

 

[I hit the lottery]

gimme a minute, i've got your single beat in cr23/cpu-z, but I cannot get the multi stable for either, my thermal grizz contact frame doesnt come till tomorow, and im not guna lie, last week, I was def seeing some light under my straight edge when i checked the cpu. IDK if that effects the cpu OC but it def feels like it, the mem is def low...you might have me whipped till this frame comes. Ill give it a few more tries... i got 22.3k on multi cr23 prior to the bend, I could barely crack 21k this morning...so shes not firing on all cylinders, you guys got the contact frame?

 

[phanbuey]

gimme a minute, i've got your single beat in cr23/cpu-z, but I cannot get the multi stable for either, my thermal grizz contact frame doesnt come till tomorow, and im not guna lie, last week, I was def seeing some light under my straight edge when i checked the cpu. IDK if that effects the cpu OC but it def feels like it, the mem is def low...you might have me whipped till this frame comes. Ill give it a few more tries... i got 22.3k on multi cr23 prior to the bend, I could barely crack 21k this morning...so shes not firing on all cylinders, you guys got the contact frame?

Yeah I'm running a cheapo one I found on eBay. It didn't make a ton of difference in my case - but my chip was pretty straight. I think delidding would be a worthwhile experiment but I'm a bit scared lol, those resistors on top of the chip look fragile.

 

[fevgatos]

No contact frame for me, never used one

 

[I hit the lottery]

yeah I sprung for the thermal.. Idk why, I know the much cheaper thermalrite is just fine, but w.e....Delidding looks amazing, but you seen these first few people who are making the tools to do this crap? The heat and force needed is insane i'm confident in my hands but, it looks nuts... Tell ya what..with raptor coming...and the 13600k beating the 5950x stock.....If you decide to do it, Ill go to the looney bin with ya! Yours and mine are two of the best 'home' non liquid nitrogen overclocks i've seen, bar none....... You down? I heard good things about this gear, https://pcper.com/2022/04/delid-your-alder-lake-rockit-cool-12th-gen-intel/ from consumer and reviewer ... oh and here, WHELP....I did 904 single whilst getting 8720 multi....and 898 single whilst getting 8842 multi.....But could not get both, and not one clean pass of cine, she def bowed a bit. hahahah....... No excuses though, Keep it shiny for me sir, Ill be back for it

 

[phanbuey]

yeah I sprung for the thermal.. Idk why, I know the much cheaper thermalrite is just fine, but w.e....Delidding looks amazing, but you seen these first few people who are making the tools to do this crap? The heat and force needed is insane i'm confident in my hands but, it looks nuts... Tell ya what..with raptor coming...and the 13600k beating the 5950x stock.....If you decide to do it, Ill go to the looney bin with ya! Yours and mine are two of the best 'home' non liquid nitrogen overclocks i've seen, bar none....... You down? I heard good things about this gear, https://pcper.com/2022/04/delid-your-alder-lake-rockit-cool-12th-gen-intel/ from consumer and reviewer ... oh and here, WHELP....I did 904 single whilst getting 8720 multi....and 898 single whilst getting 8842 multi.....But could not get both, and not one clean pass of cine, she def bowed a bit. hahahah....... No excuses though, Keep it shiny for me sir, Ill be back for it

View attachment 262968

Once raptor lake is out I am in for sure.

 

[I hit the lottery]

Once raptor lake is out I am in for sure.

Bet! See the leaked 375$ price for the 13600kf? lol 5950x and 12900k performance for that price at stock is not a bad deal man.

 

[ARF]

Ryzen 9 5900X:

AVX2 vs default:

vs

And Ryzen 5 2500U:

AVX2 vs default:

vs

Usually the Ryzen 5 2500U scores around 380/395 - 1800/1900 on the default bench.
But I have open browsers, so it takes some CPU time.

 

[AleXXX666]

What lol, the difference is 4%

the price difference of same-brand and same-"possibilities" motherboard is 65%... yeah, 12400F is no-brainer solution..

 

[next3r]

MSI GT75 7RE
notebook 7820hk - 4.5ghz ,,.but still limited by notebook / FW
+
AVX2 "custom FIX" ,.,.not works well on defaults config.

 

[The King]

AMD Ryzen 7 5800X @ 4448.96 MHz - CPU-Z VALIDATOR

[i9b1qj] Validated Dump by DESKTOP-SRC5DS8 (2022-09-29 20:00:05) - MB: MSI B450M MORTAR MAX (MS-7B89) - RAM: 32768 MB

valid.x86.fr

 

[bgeneto]

Challenge accepted.

View attachment 262954
Intel Core i5 12600K @ 5521.5 MHz - CPU-Z VALIDATOR (x86.fr)

View attachment 262955


12600k is a nutty chip. If I had better cooling this would run at 5.6 Problem is there are no auto voltage profiles at 55/56x and none of the stock ones work with high bclk so it's hard to put a backoff in to get 5.6 on 2 cores and 5.4 on all core. volts stick at max ratio volts all the time.

Indeed... no point in upgrading to Raptor Lake or even zen 4 for you.
I was able to get 873 points (single) with my 12600 (non-K) air cooled (original box from Intel).
Thing is: I'm getting high scores only in the first two or three runs, then scores drops to near 800 points.
Do you have any ideia why is this happening? It seems some kind of throttling, but thermals and power are OK, not exceeding.
Do your scores also drops after a few consecutive runs? TIA.

 

[ezmafl]

Kill most of the system tray programs on the taskbar, and did you wait several minutes after booting into Windows before running? Maybe Windows is checking for and/or applying updates in the background?

 

[The King]

View attachment 263644

AMD Ryzen 7 5800X @ 4448.96 MHz - CPU-Z VALIDATOR

[i9b1qj] Validated Dump by DESKTOP-SRC5DS8 (2022-09-29 20:00:05) - MB: MSI B450M MORTAR MAX (MS-7B89) - RAM: 32768 MB

valid.x86.fr

Slight improvement using CO. Should break 690 maybe 700 ST after some further tunning.

AMD Ryzen 7 5800X @ 4448.96 MHz - CPU-Z VALIDATOR

[mc1unu] Validated Dump by DESKTOP-SRC5DS8 (2022-09-30 04:02:38) - MB: MSI B450M MORTAR MAX (MS-7B89) - RAM: 32768 MB

valid.x86.fr

 

[gwynbleidd997]

Slight improvement using CO. Should break 690 maybe 700 ST after some further tunning.
View attachment 263689

AMD Ryzen 7 5800X @ 4448.96 MHz - CPU-Z VALIDATOR

[mc1unu] Validated Dump by DESKTOP-SRC5DS8 (2022-09-30 04:02:38) - MB: MSI B450M MORTAR MAX (MS-7B89) - RAM: 32768 MB

valid.x86.fr

Try booting into safe mode, you'll probably reach 700 1T there.
I gain like 8-10 points in 1T in CPUZ when I'm in safe mode (5600X at 4.85Ghz).

 

[Athlonite]

A little tinkering with PPT TDC EDC and hey presto a wee bit more for a little bit less

 

[INSTG8R]

I don't think this is too bad for a CPU that can't take an OC

 

[dont whant to set it"']

Here is one that is OC'ed.

LE: SMT off, scores from a cold boot.

 

[INSTG8R]

Here is one that is OC'ed.

LE: SMT off, scores from a cold boot.
View attachment 263850

Nice OC BUT my scores are slightly better? Your ST score is definitely better

 

[dont whant to set it"']

@INSTG8R , Well , I have set SMT off in BIOS/UEFI , so 8C/8T.

 

[INSTG8R]

@INSTG8R , Well , I have set SMT off in BIOS/UEFI , so 8C/8T.

Fair enough why your ST score is better, plus you got a good little OC. Any reason you disabled SMT? My board compensates for the lack of OC with a setting called Kombo Strike which basically allows it to hold full boost better under MT loads.

 

[Athlonite]

Fair enough why your ST score is better, plus you got a good little OC. Any reason you disabled SMT? My board compensates for the lack of OC with a setting called Kombo Strike which basically allows it to hold full boost better under MT loads.

I've heard quite good things about that Kombo Strike Jayztwocents seems to think it's great on 7000 series cpu's where he got it to undervolt and maintain a 5.1GHz allcore in CB23 all at a 10 degrees less than stock