t_ski
Former Staff
- Joined
- Apr 11, 2006
- Messages
- 11,960 (1.82/day)
| System Name | My i7 Beast |
|---|---|
| Processor | Intel Core i7 6800K |
| Motherboard | Asus X99-A II |
| Cooling | Nickel-plated EK Supremacy EVO, D5 with XSPC Bayres & BIX Quad Radiator |
| Memory | 4 x 8GB EVGA SuperSC DDR4-3200 |
| Video Card(s) | EVGA 1080 SuperClocked |
| Storage | Samsung 950 Pro 256GB m.2 SSD + 480GB Sandisk storage SSD |
| Display(s) | Three Asus 24" VW246H LCD's |
| Case | Silverstone TJ07 |
| Audio Device(s) | Onboard |
| Power Supply | Corsair AX1200 |
| Keyboard | Corsair K95 |
| Software | Windows 10 x64 Pro |
They are BP 1/2" ID, 3/4" OD 45 degree rotary fittings, and the top one has a 10mm extension on it to lift the compression part away from the other fitting. Otherwise, they hit each other and won't screw on.
I haven't decided what parts I'm going to use from sneeky's kit, but I plan on using the CPU block for sure. It will probably be a while before that goes in though, due to the time involved and the time available. I had Tuesday and Wednesday off from work, and it took a lot of time over about a 27-hour period to install these. In fact, it took two hours alone to mount each GPU block (remove the stock cooler & clean, mount the block, remove to check contact, adjust and remount, remove to check contact, adjust and remount). I also had to flush the loop, build the SSD/HDD holder three times, and clean the rig in general.
I haven't decided what parts I'm going to use from sneeky's kit, but I plan on using the CPU block for sure. It will probably be a while before that goes in though, due to the time involved and the time available. I had Tuesday and Wednesday off from work, and it took a lot of time over about a 27-hour period to install these. In fact, it took two hours alone to mount each GPU block (remove the stock cooler & clean, mount the block, remove to check contact, adjust and remount, remove to check contact, adjust and remount). I also had to flush the loop, build the SSD/HDD holder three times, and clean the rig in general.
