- Joined
- Oct 29, 2010
- Messages
- 107 (0.02/day)
System Name | My PC! |
---|---|
Processor | AMD FX 8350 (4,66 GHz) |
Motherboard | Asus Crosshair V Formula |
Cooling | Corsair H100 |
Memory | 16GB Kingston HyperX Predator T2 DDR3 at 2133 MHz |
Video Card(s) | SAPPHIRE NITRO+ RX 480 4G (1350 - 1900 MHz) |
Storage | Western Digital Caviar Black 1 and 2 TB (WDC Green) |
Display(s) | LG 24EA53VQ |
Case | Coolermaster HAF X (942) |
Audio Device(s) | Sound Blaster ZX |
Power Supply | Corsair TX 950W |
Software | Windows 7x64 Ultimate SP1, Windows XP Professional SP3 |
Greetings to everyone.
Recently I found on the basement, my baby at case with a socket 7 motherboard. It's been stored since 2004.
The system can't post even checking with Pentium MMx 233 MHz and AMD K6-2 450 MHz. Last time the system worked had the K6 installed.
Dimm is fine because it works with my celeron system and it is a PC100. The GPUs are the Voodoo 3 and the S3 Trio 3D/2X both for AGP slot.
The motherboard is the Shuttle HOT-591P.
All the chipsets are getting hot, so I think there's no issue about faulty hardware, the cpu cooler is connected to psu with molex connector. I've played with the jumpers and the system clock with no luck, previously the system was set up for the K6-2.
When the system switched on the system beeps continuously and sometimes it takes time for the first beep to heard, like it may post.
Any ideas?
Recently I found on the basement, my baby at case with a socket 7 motherboard. It's been stored since 2004.
The system can't post even checking with Pentium MMx 233 MHz and AMD K6-2 450 MHz. Last time the system worked had the K6 installed.
Dimm is fine because it works with my celeron system and it is a PC100. The GPUs are the Voodoo 3 and the S3 Trio 3D/2X both for AGP slot.
The motherboard is the Shuttle HOT-591P.
All the chipsets are getting hot, so I think there's no issue about faulty hardware, the cpu cooler is connected to psu with molex connector. I've played with the jumpers and the system clock with no luck, previously the system was set up for the K6-2.
When the system switched on the system beeps continuously and sometimes it takes time for the first beep to heard, like it may post.
Any ideas?