Discussion in 'Overclocking & Cooling' started by giorgos th., Aug 17, 2006.
yeah for the mem...
gotta figure that out, my ram cooler doesnt fit because of the heat sinks, gotta have to find a way to hang a fan in front of them or something
well giorgos, thanks for the help bro, i'll post some screenies tonight if I can get anything worthy. Its hot as heck now even inside my house. Thats why i'll wait till tonight.
rubber bands or zip ties work wonders thats how i have been cooling my ram for about 2years now and hasn't failed me yet
ive done that before, but never on this case, so I gotta figure something out tonight.
23.68 @ Phenom 9950 B.E @ 3.3GHZ
good run 3dsage, i am right there with you, except I got a few more mhz out of it but I have the onboard, so its pretty even I would say
looks like HT link doesnt make a difference. I'm at 2.4GHZ and your at 2.0GHZ, and you still nipped me.
NB does alot HT to me is not a big deal, but NB speed does help a lot.
Yeah, thanks for that tip. It does bump up the bench #'s
any improved scores?
Working on it, cant get my cooling under control. I'm hitting around 66-68C with 1.5V, which is what I need to be stable above 3.4GHZ.
I might lap my AC Xtreme
a good lap will bring down temps 10ºc approx.
But it voids warranty so becareful
If I can drop my temps by 10C, i'll be golden
but that takes a good lap though.
YOu've ever lapped before?
Nope, this will be my first attempt. But I have a Cele, and a Sempron that will be sacrificed
Watch these videos, they guided me and my 9850 came out rather good. First time lapping, dropped about 6-7ºc
I was looking at a 5-7C drop, anything above that will be a lovely bonus.
fullinfusion lapped his 9850 and got like almost 12ºc drop
I'm gonna do it man, that will be insane, i'd be able to bump to voltage to like 1.55 or 1.6 and temps will be under control.
weird though, under full load at 1.52v i see about 48-49ºc on mine right now. I Have the factory cooler! You said you were hitting mid to high 60ºc's?
Yeah dude, high 60's.
you get 49C, during torture testing load? on Factory HS.
well during wprime runs which use all cores up to 100%. might get a few degrees higher on a torture test, but still I think its lower regardless.
Figured I'd throw these up, havent messed with it much since I got it, just put some numbers in and booted right up.
here you go giorgos, figured out a little mounting position for the fans to cool the RAM
Separate names with a comma.