Hello pt..
Ok here is a shot of the right mobo and parts
Here is the panel mounted
there was not enough difference in the mobos to need to make a new panel, just had to trim some parts
now some asked how to bend the plastic so Il grab a scrap and show you. Working Plastic is like painting it needs practice (and 2 hands, taking picts while bending hot plastic is dumb)
what I do to make a straight bend is clamp the plastic to the edge of my desk, make sure the edge of your surface is even (no holes and chips like mine) or the seam wont be straight
Than I get my heat gun(fancy hair dryer) and heat the corner I want to bend. Make sure you go back and forth or you will melt a hole in the plastic.
Once the plastic gets soft (after a min or 2) than bend it while its soft (gloves help here)
if you want to bend it again in a different spot wait for the first bend to cool. Than heat the second spot(keep the gun moving) and when its soft I use a piece of wood to help keep the bend straight
and Voila
now this looks like crap as i was holding the camera in one hand the stick in another and the heat gun with my 3rd hand...but you should get the idea.
Another thing if you cant get the color plastic you want(clear is cheaper too) you can paint the back side of the plastic and it will look like you have an 1/8" coat of clear over the paint (really nice)
the paint was a reg black metalic(lol, it looks pretty nice)
(i keep checking for updates to it xD)
