techpower meltdown says hello

[Meltdown]

Hello guys and gals i,am new to the forums would like to say hello

Have been reading your forums for six months timed to jump in and get some good feed back

So have just load my box up with with some new amd gear, was hoping to get close to 20k in 3dmarks.

well 13k is as close as got runing amd x3 720 at 3.5 and 4870x2 was thinking should do better then that? so what think 20k to high

Also the amd x3 720 i unlocked forth core, tryed bentchs both ways higher scores with 4 cores

 

[crtecha]

Welcome to TPU.

Heres a thread for 3d mark scores.

http://forums.techpowerup.com/showthread.php?t=63949&highlight=3dmarks

look through there and that'll give you a idea of what you should expect as far as number

 

[TRIPTEX_CAN]

Hello and welcome to TPU!!

First of all to break 20k you will need to OC that CPU. At least 3.6.-3.8Ghz will be needed to reach your goal. I dont think you'll need to OC your GPU at all.

If you look at the system in my specs.. I've never broken 20k (19350 is my highest) but since you have more cores it will be much easier.

 

[Meltdown]

Welcome to TPU.

Heres a thread for 3d mark scores.

http://forums.techpowerup.com/showthread.php?t=63949&highlight=3dmarks

look through there and that'll give you a idea of what you should expect as far as number

thanks crtecha i will take look at that

 

[niko084]

First of all to break 20k you will need to OC that CPU. At least 3.6.-3.8Ghz will be needed to reach your goal. I dont think you'll need to OC your GPU at all.

Indeed, you will need a HEAVY overclock to accomplish numbers like that.

Give you an idea, my x3210 quad @ 3200 did 14k with my 4850 clocked 705/1050.

The 4870x2 is clocked not much faster and loses some over dual physical cards.

My quad will give me tons of points over your tri-core.

 

[Meltdown]

Hello and welcome to TPU!!

First of all to break 20k you will need to OC that CPU. At least 3.6.-3.8Ghz will be needed to reach your goal. I dont think you'll need to OC your GPU at all.

If you look at the system in my specs.. I've never broken 20k (19350 is my highest) but since you have more cores it will be much easier.

Nice Job that score would make me happy, thanks for giving me hope i will work on more power

i am getting real close to 3.6 but not stable yet

 

[MoonPig]

Welcome to TPU.

I'm not a benchmark user, so i can't help you there.

 

[MRCL]

Welcome Welcome.

Give Vantage also a try. I'm trying to hit 10k there

 

[Meltdown]

Welcome to TPU.

I'm not a benchmark user, so i can't help you there.

thats ok moonpig I just love what you did to that desk mod sweet

 

[Meltdown]

Mrcl sounds good i will look into that vantage

somtime i get this feeling like 3dmarks doesn't like ati cards

 

[MRCL]

Mrcl sounds good i will look into that vantage

somtime i get this feeling like 3dmarks doesn't like ati cards

And low clocked CPUs. With my E6300 at stock 1.86GHz I would get around 8k in 3dm06. Now with 3.5GHz its almost double the score.

 

[niko084]

Mrcl sounds good i will look into that vantage

somtime i get this feeling like 3dmarks doesn't like ati cards

3dmark06 doesn't like ATI cards, mainly because it automatically counts physx points.

 

[Meltdown]

on the tech side hears where i am at

CPU Properties:
CPU Type QuadCore AMD Phenom II X4 Black Edition 20
CPU Alias Deneb
CPU Stepping RB-C2
Engineering Sample No
CPUID CPU Name AMD Phenom(tm) II X4 20 Processor
CPUID Revision 00100F42h
CPU VID 1.3250 V
North Bridge VID 1.2000 V

CPU Speed:
CPU Clock 3616.4 MHz
CPU Multiplier 18x
CPU FSB 200.9 MHz (original: 200 MHz)
HyperTransport Clock 2009.1 MHz
North Bridge Clock 2009.1 MHz
Memory Bus 669.7 MHz
DRAM:FSB Ratio 20:6

CPU Cache:
L1 Code Cache 64 KB per core
L1 Data Cache [ TRIAL VERSION ]
L2 Cache 512 KB per core (On-Die, ECC, Full-Speed)
L3 Cache 6 MB (On-Die, ECC, NB-Speed)

Motherboard Properties:
Motherboard ID 03/05/2009-RD790-SB750-7A66AG04C-00
Motherboard Name Gigabyte GA-MA790FXT-UD5P (2 PCI, 3 PCI-E x1, 2 PCI-E x16, 4 DDR3 DIMM, Audio, Gigabit LAN, IEEE-1394)

Chipset Properties:
Motherboard Chipset AMD 790FX, AMD K10
Memory Timings 7-7-7-20 (CL-RCD-RP-RAS)
Command Rate (CR) [ TRIAL VERSION ]
DIMM1: Micron 16JTF25664AZ-1G1F1 2 GB DDR3-1066 DDR3 SDRAM (7-7-7-20 @ 533 MHz) (6-6-6-18 @ 457 MHz)
DIMM2: Micron 16JTF25664AZ-1G1F1 [ TRIAL VERSION ]

BIOS Properties:
System BIOS Date 03/05/09
Video BIOS Date 12/11/08
Award BIOS Type Award Modular BIOS v6.00PG
Award BIOS Message GA-MA790FXT-UD5P F3b
DMI BIOS Version F3b

Graphics Processor Properties:
Video Adapter Sapphire Radeon HD 4870 X2
GPU Code Name R700 (PCI Express 2.0 x16 1002 / 9441, Rev 00)
GPU Clock 507 MHz (original: [ TRIAL VERSION ] MHz)
Memory Clock 500 MHz (original: 900 MHZ)


time for sleep get back to all

 

[crtecha]

Thats awesome dude very thorough . download cpu-z and gpu-z. It'll save you some time if you need to post your specs

 

[Meltdown]

thanks crtecha but not sure how too post it whats the quick way in showing the img

 

[crtecha]

I usually just do a quick print screen. Hold alt to do the active window then I have techpowerup's image uploader bookmarked. I throw it in there and post. heres a example

 

[Meltdown]

techpowerup's image uploader that sounds sweet looking for that write now thanks

 

[crtecha]

http://www.techpowerup.org/upload.php

 

[MRCL]

Techpowerup Image Upload is recommended, yes... no annoying ads and its faster than imageshack for example.

 

[Meltdown]

thanks for the link have 24'" screen so not sure how to sizethe img down

 

[crtecha]

tpu with auto size it for you once its posted.

 

[MRCL]

thanks for the link have 24'" screen so not sure how to sizethe img down

TPU uploader wil automaticly shrink it to display at the forums (you can click on the image then so it will be displayed in full size).

I myself use MS Paint for quick cropping.

 

[Meltdown]

IT was write there in front of me but i got an (Error: Could not move uploaded file) any help
I have router do i need to port foward

 

[thoughtdisorder]

Hello guys and gals i,am new to the forums would like to say hello

Have been reading your forums for six months timed to jump in and get some good feed back

So have just load my box up with with some new amd gear, was hoping to get close to 20k in 3dmarks.

well 13k is as close as got runing amd x3 720 at 3.5 and 4870x2 was thinking should do better then that? so what think 20k to high

Welcome to TPU!

 

[MRCL]

IT was write there in front of me but i got an (Error: Could not move uploaded file) any help
I have router do i need to port foward

File extensions allowed: gif, jpg, png, maximum size: 2 MB

Checked that?

Port forwarding is not necessary.