Discussion in 'techPowerUp! Club Forum' started by mullered07, Aug 13, 2008.
My thoughts exactly, once AIO, always AIO. I like not cutting my fingers on fin stacks.
The design yes but all of the pump internals are made in house for thermaltake so performance and durability will be different of antec.
I purchased my 920 over a year ago - Still going strong and an amazing cooler, just switch the fans to Scythe GTs = winning combination
Corsair's SP120s are also decent, but use them at 80-90% with a fan controller otherwise they can be a bit whiney.
maybe so, that that means very little when the difference in results are so close they are negligible - apples to apples, you can re-label a TT Water 2.0 Pro as a Antec 920 and nobody would notice the difference. apart from the software or slight difference in design/mounting
True but same could go for corsair and their products I have seen have been RMA'd more times than none
At the cost of being able to send my old H80 back for RMA, i decided to take the pump to bits and inspect. The old Corsair pump units are poorly made, my issue was with a cable that wasnt soldered in, it was just glued against a copper plate. While I may have a H100, in the coming months if i were a prospective AIO buyer, I wouldnt get a Corsair after such experience.
I guess people buy corsair for their warranty
Thanks for that info if i go water it'll be a thermaltake or custom
Even i admit the 5 year warranty, even on refurbs is excellent business practice.
Try the newer H80i...... excellent performance, and quiet (I run mine on balanced setting), the H80i performs as well as the old H100 but of course is cheaper.
cant decide if to order a EVGA GTX680 FTW or a 7970...
Flip and coin and when the coin is in mid-air get the card that comes to front of your mind.
I don't know if i'm really angry at Google or not.
Last year on the 29 July 2012, my Dad transferred £175 to my account so i could get him a Google Nexus 7 for my Mum. Bought, delivered, still working. I check my balance last night, -£168... I'm like :O
Turns out, that payment was never taken out... 6 months ago... and was just done now when i had only what i needed to cover my two phone bill, in my bank. They both came out just after, making me even deeper into this debt.
Im heavily leaning towardz the 680 cuz i hate amd drivers :shadedshu
I thought I'd give AMD a try as I had been with NVidia for years but I totally regret it! I have more problems with dual monitor and audio over HDMI especially when switching from one monitor to another or both. That alone annoys the hell out of me as I like to play games using the TV and I don't like leaving it as dual monitors as I get a stupid refresh rate issue aswel on one of the screens.
Well if you hate AMD drivers then might as well get the 680, future headaches caused by further AMD drivers is not worth it.
Then you've made your decision.
I think I've only ever had one problem when using ATi AMD drivers and I can't even remember what that was. I had a lot of issues when using nVIDIA drivers. As I have a flashed 6950 I doubt I'll be upgrading my card for a good couple of years but I'm definitely keen to go green again at some point.
I'm looking forward to the end of the month when I can buy a 256GB Sammy 840 Pro.
How much are you paying for that?
Also anyone here got a socket 1156 CPU they want to sell for cheap? THINKING of upgrading the CPU
Quid over £170.
The company I currently work for won't let me get one at trade because our purchaser is a major twat'ead.
I got myself a Nanoxia Deep Silence 2, its a decent case for the price, but is slightly not wide enough for my second cpu fan. The way my ram works is slot 2 and 4 for dual channel; which means the fan is mounted higher on that side.
Unlucky for me the Patriot stuff is the same height as my Rip Jaws. I know its ocuk but it is a good price for the specs, just got to hope to hell you don't need to return anything to them.
I have the same issue with my noctua though I can raise the fan a few mms so it just sits on top of the RAM if you know what I mean?
The way the Phanteks fan mounts work, you can install the fans at any height even just touching the ram its too big to fit but i know what you mean. My old case i had the fan just above the ram and it fit inside the case with a few mills to spare.
Ah so it would be touching the side of the case if it where any higher? sux :shadedshu
Yup, its just a few millimetres tall to fit in the case, i even tried forcing the side panel on which was stupid but that never worked anyway. I don't get why the Deep Silence 1 was wider, but the Deep Silence 2 is thinner yet longer to accommodate E-ATX motherboards. Who the fuck would put a mobo that size in silent mid tower?
The cooler is massive but it fits in with plenty of room. I heard this cooler has some problems with ram clearance on the second fan so im not that bothered, still works great with one fan tho.
well heres a small update on my situation with my 6970s. After reading a few reviews of 6970s vs GTX680 I decided it would be best to keep them.
So, What did i do?
I hunted down a pair of Alpenföhn Peter Universal VGA coolers. which cost me just under £100 for both.
Now i was thinking.... throw another £200-300 ontop of that and id have me a GTX680 or 7970 and while that option did sound most tasty I decided to go with the 'cheaper' option and replace both of the coolers just for the sake of them looking the pair and not cause any unforeseeable installation issues
I dont really WANT to spend that much money on cooling but I tell myself that I wont be replacing them for at least another year to make it more worthwhile cuz at this current stage - 6970s dont really have a high resale value and they still kick ass against the GTX680 albeit with more heat and power consumption so why not keep them?
I ask myself if i have any trouble running games - Obviously not! the only issues ive had are driver related issues and Im not desperate nor currently wealthy enough to fork out £400 on a new GPU
Since they were only GPU coolers - I ordered them from OCuK, being GPU coolers - what could possibly go wrong with them?? - so fingers crossed their website is displaying the correct amount of units in stock and that they dont send me the wrong items.
Unfortunately i suffered another wave of bad luck and ended up spilling tea over my G500 mouse and it is totally messed up. it works but suffers from random behaviour such as not registering mouse clicks or closing windows/browser tabs when i left click.
I already got another on order - I havent quite maxed out my credit card yet, but its seriously starting to worry me. Im spending too much money I havent got
Have you washed and dried your G500 yet? Some coffee might be causing short problems.
Well treat the aftermarket coolers as investments, you will be reusing them for future builds
yeah I dried it with a hair dryer but no go I think what made it worse was that the PC was actually on at the time so the mouse was powered on/in use.
are OCuK supposed to give you a tracking number with your order?
Anyone got any LGA775 level hardware they're willing to offer me? Needing most things, haha.
Separate names with a comma.