| ModMyMods | HighSpeedPC | SeaSonic |
| Apacer | CableMod | Aorus |
Hi fine people
I've been the GPU reviewer for OCN for quite a bit now and I decided to create a rig just for testing GPUs.
I have partenered up with HighSpeedPc.com, Seasonic, PC Mods Canada, ModMyMods, Aorus, Apacer and Cablemod to bring you the beast of a test bench I will be creating.
I will be 3D Printing a lot of things to make this test bench one of a kind. I started out with an XL-ATX bench supplied by HighSpeedPC.com, they make some great test benches, but I wanted more. I told them I would be using two 360mm radiators, they then made a custom solution for me in the form of a standalone base that can hold two radiators with a res/pump between them like a pedestal. I took this idea and started printing brackets to have it attached to the XL-ATX bench as a third bottom tiered section.
I will be 3D printing a dual PSU bracket, SSD brackets to hold 4 SSDs and new bench posts to accomodate a third tier. Dual PSU? Am I crazy? Why?
The CPU, RAM and GPU are made to be easily swappable for various testing, so soft tubing was a must for certain parts.
Hardware said:
The custom dual PSU cable done by PC Mods Canada is basically an 18-pin extension with a bridge to PS_ON and ground for the second PSU. This way I don't have to have two 24-pin cables and one more for the bridge to the motherboard. This also enables me to have a Kill-a-Watt one the power supply to determine the actual GPU power draw from the PSU. The 290X will be in the last slot of the motherboard with quick disconnects for testing watercooled GPUs
Watercooling said:
Last edited:
