• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

The Ultimate Realtek HD Audio Driver Mod for Windows 10

Mason76

New Member
Joined
Jan 19, 2019
Messages
19 (0.01/day)
if i install alan realtek driver my wifi(intel) on nootebook work is very bad!why?
 
Joined
Aug 24, 2018
Messages
818 (0.40/day)
System Name Dell Inspiron 7375
Processor AMD Ryzen™ 7 2700U Mobile Processor with Radeon™ RX Vega 10 Graphics
Memory 16GB (total) 2400MHz DDR4 SODIMM
Video Card(s) Radeon™ RX Vega 10 Graphics
Storage SanDisk X600 SATA SSD 512GB
Display(s) BOE NV13FHM
Audio Device(s) Realtek ALC3253 (Dell Labelling) ALC255 (Real name)
if i install alan realtek driver my wifi(intel) on nootebook work is very bad!why?
Q1: Are you sure its the modded drivers that's causing problems? How do you know?
Q2: Describe "bad". What do you mean? A yellow icon in device manager? Are hotspots detected? Wifi does not connect at all even if hotspots are detected?
Q3: Are you using the latest Intel Wifi drivers?
 

philrj

New Member
Joined
Mar 10, 2019
Messages
2 (0.00/day)
Hi there i just make all pass to install this driver and not worked.
My Mobo is that
GA-H270M-Gaming-3-rev-10
 
Joined
Apr 20, 2017
Messages
304 (0.12/day)
An Experimental Project will Coming soon...
SoundBlaster 720.PNG
 
Joined
Aug 24, 2018
Messages
818 (0.40/day)
System Name Dell Inspiron 7375
Processor AMD Ryzen™ 7 2700U Mobile Processor with Radeon™ RX Vega 10 Graphics
Memory 16GB (total) 2400MHz DDR4 SODIMM
Video Card(s) Radeon™ RX Vega 10 Graphics
Storage SanDisk X600 SATA SSD 512GB
Display(s) BOE NV13FHM
Audio Device(s) Realtek ALC3253 (Dell Labelling) ALC255 (Real name)
Joined
Aug 24, 2018
Messages
818 (0.40/day)
System Name Dell Inspiron 7375
Processor AMD Ryzen™ 7 2700U Mobile Processor with Radeon™ RX Vega 10 Graphics
Memory 16GB (total) 2400MHz DDR4 SODIMM
Video Card(s) Radeon™ RX Vega 10 Graphics
Storage SanDisk X600 SATA SSD 512GB
Display(s) BOE NV13FHM
Audio Device(s) Realtek ALC3253 (Dell Labelling) ALC255 (Real name)

Wildthing

New Member
Joined
Mar 5, 2019
Messages
10 (0.01/day)
@Dj Urko Optimiser and Regulator crash and close when I try to click on it and Dts don't work when i click it nothing happen
any suggest?
I followed this procedure
1. remove old driver and enable TEST Mode via Command Promt (Read Disabling.docx in Plugins folder) then restart the PC.
2. Install DTS APO GUI First then Sign out and up the PC.
3. Install the driver mod using Setup normal then restart the PC.
4. Install all the Plugins in folder Plugins such as Nahimic, Dolby digital plus HT, DTPC(content assets only), Dolby Atmos for Gaming. That's All
 
Last edited:
Joined
Apr 20, 2017
Messages
304 (0.12/day)
So There is New Driver on My Link in Page 1. Sound Blaster 720 is Already integrated. Other Plugins Are Dolby PCEE4, Dolby Digital Plus, Dolby Atmos for Gaming, DTS Studio Sound, Nahimic. Dolby Digital Output Via SPDIF.

I Guide To Install the Driver and Plugins
1. Unninstall the old Driver via Programs in Control panel then Restart the PC.
2. Verify that SecureBoot is disabled via Bios or UEFI Setup.
3. Open CMD via Administrator and type two commands to Enable Test Mode:
a. bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS then press Enter.
b. bcdedit -set TESTSIGNING ON then press Enter.
4. Close CMD and Restart the PC.
5. Install DTS APO GUI from folder Plugins then Sign Out and UP the PC.
6. Copy the folder Creative to C:\ProgramData
7. Enable Developer Mode from Windows Settings - Update - For Developers.
8. Install Creative Sound Blaster Connect
9. Install Dolby Atmos for Gaming
10. Install the Driver Using Setup then Restart or Sign Out and Up the PC.
11. Install DTPC from folder Dolby Tuning and Profile Creator (check only Content assets)
12. Run A2-V4 RegPath
13. Install DolbyDigitalPlusHT
14. Install Nahimic and Product settings
15. Sign Out and UP the PC
II Guide for Better Sound Quality
1. set Dolby Home Theater v4 to Music
2. set Dolby digital plus to Music with Dialog Enabled
3. set Dolby Atmos to Game With All Sliders to 30%
4. Set DTS Studio Sound to Headphone X with Stereo Preference In Front
5. Ajust Litle bit Nahimic (Voices 3 Bass 2 Treble 1)

@Wildthing Uninstall this Driver And Try the New Package on My Link
 

Mason76

New Member
Joined
Jan 19, 2019
Messages
19 (0.01/day)
So There is New Driver on My Link in Page 1. Sound Blaster 720 is Already integrated. Other Plugins Are Dolby PCEE4, Dolby Digital Plus, Dolby Atmos for Gaming, DTS Studio Sound, Nahimic. Dolby Digital Output Via SPDIF.

I Guide To Install the Driver and Plugins
1. Unninstall the old Driver via Programs in Control panel then Restart the PC.
2. Verify that SecureBoot is disabled via Bios or UEFI Setup.
3. Open CMD via Administrator and type two commands to Enable Test Mode:
a. bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS then press Enter.
b. bcdedit -set TESTSIGNING ON then press Enter.
4. Close CMD and Restart the PC.
5. Install DTS APO GUI from folder Plugins then Sign Out and UP the PC.
6. Copy the folder Creative to C:\ProgramData
7. Enable Developer Mode from Windows Settings - Update - For Developers.
8. Install Creative Sound Blaster Connect
9. Install Dolby Atmos for Gaming
10. Install the Driver Using Setup then Restart or Sign Out and Up the PC.
11. Install DTPC from folder Dolby Tuning and Profile Creator (check only Content assets)
12. Run A2-V4 RegPath
13. Install DolbyDigitalPlusHT
14. Install Nahimic and Product settings
15. Sign Out and UP the PC
II Guide for Better Sound Quality
1. set Dolby Home Theater v4 to Music
2. set Dolby digital plus to Music with Dialog Enabled
3. set Dolby Atmos to Game With All Sliders to 30%
4. Set DTS Studio Sound to Headphone X with Stereo Preference In Front
5. Ajust Litle bit Nahimic (Voices 3 Bass 2 Treble 1)

@Wildthing Uninstall this Driver And Try the New Package on My Link
can you make your sound enhancement pack just by installing the exe realtek file? after the driver of Alan, I still have a modernized realtek panel, how do I get the stock back? (
 

Planr

New Member
Joined
Mar 13, 2019
Messages
1 (0.00/day)
Hello, I am a Windows 10 Home edition user who has been having considerable trouble getting their audio drivers to work.
Every time a new Windows 10 update comes out, it seems to automatically reset my audio drivers to factory default, and wipe my Realtek Advanced HD Audio drivers I got from this thread several months ago.

My old drivers I got from here a few months ago no longer seem to work, so I was wondering how I could go about installing the latest update for the driver.

However, I am not very good at the technical sides of Windows 10, so I am unsure how to follow the directions in the OP that @Dj Urko mentioned above.
Nearly all of the steps are very confusing to me, and I wish it could all be installed in one go with an executable.
Is there any way I can do that? I want to have good audio drivers for my computer but I don't know how to do all this technical stuff.
 

ScrooW

New Member
Joined
Jan 15, 2019
Messages
20 (0.01/day)
Location
Brasil
@Dj Urko


Does this new driver contain only the soundblaster integration or is there something else? corrections, improvements, etc.
 
Top