1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Thermaltake Introduces Wall-Mountable Core P1 mITX Chassis

Discussion in 'News' started by Raevenlord, Mar 16, 2017.

  1. Raevenlord

    Raevenlord News Editor Staff Member

    Joined:
    Aug 12, 2016
    Messages:
    427 (1.89/day)
    Thanks Received:
    412
    Thermaltake is consistently increasing its offers in the wall-mountable chassis portion of its business. Now, the company is introducing a mITX chassis that's supposed to appeal to wall-mounting users who prefer a lither system with a smaller footprint.

    As is the hallmark of the P series, the P1 offers support for your choice of AIO or custom loop liquid coolers. It's open-frame design and 5 mm thick tempered glass will make sure to showcase all your components and bling properly. The Core P1 features three setup choices - vertical, horizontal, and wall-mounted. The chassis allows for three 2.5" drives and an extra 2.5" or 3.5". The case features five expansion slots, looking to offer more flexibility in the installation. The Core P1 allows 2x 120 mm fans to be installed, or 1x 240 mm radiator. The clearance for the CPU cooler is 170 mm, the graphics card can be up to 380 mm with a radiator thinner than 30 mm (without fans), and the PSU length sits at to 180 mm.

    [​IMG] [​IMG] [​IMG] [​IMG]

    Source: eTeknix
     
    peche says thanks.
  2. Diola New Member

    Joined:
    Mar 16, 2017
    Messages:
    1 (0.10/day)
    Thanks Received:
    0
    Cool, but why does it support more than one dedicated card? Mini-itx supports only one.
     
  3. claes

    Joined:
    Aug 14, 2013
    Messages:
    47 (0.04/day)
    Thanks Received:
    8
    Mini-DTX compatability (if a board ever exists) and support for ITX boards that can do bifurcation maybe?
     
  4. doxology New Member

    Joined:
    May 5, 2016
    Messages:
    12 (0.04/day)
    Thanks Received:
    6
    Thinking maybe it is supposed to be a Matx case not Mitx as Matx can have 4 expansion slots and then maybe take a 5th if the last slot is a dual slot gpu?
     
  5. claes

    Joined:
    Aug 14, 2013
    Messages:
    47 (0.04/day)
    Thanks Received:
    8
  6. wolf

    wolf Performance Enthusiast

    Joined:
    May 7, 2007
    Messages:
    5,573 (1.54/day)
    Thanks Received:
    864
    Perhaps it uses a riser card that connects to one x16 slot but splits the bandwidth for two x8 slots? given the card is parallel to the motherboard surely a riser card with right angle slot is in play anyhow.
     
  7. micropage7

    micropage7

    Joined:
    Mar 26, 2010
    Messages:
    7,385 (2.89/day)
    Thanks Received:
    1,903
    Location:
    Jakarta, Indonesia
    i dunno what on their mind, add glass on everything?
    it looks like has no concept, just add this and that then add glass
     
  8. claes

    Joined:
    Aug 14, 2013
    Messages:
    47 (0.04/day)
    Thanks Received:
    8

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)