cdawall
where the hell are my stars
- Joined
- Jul 23, 2006
- Messages
- 27,680 (4.27/day)
- Location
- Houston
System Name | All the cores |
---|---|
Processor | 2990WX |
Motherboard | Asrock X399M |
Cooling | CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL |
Memory | 4x16GB G.Skill 3600 |
Video Card(s) | (2) EVGA SC BLACK 1080Ti's |
Storage | 2x Samsung SM951 512GB, Samsung PM961 512GB |
Display(s) | Dell UP2414Q 3840X2160@60hz |
Case | Caselabs Mercury S5+pedestal |
Audio Device(s) | Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood |
Power Supply | Seasonic Prime 1200w |
Mouse | Thermaltake Theron, Steam controller |
Keyboard | Keychron K8 |
Software | W10P |
I just got my Gigabyte H55N-USB3 back from RMA land. Installed the board plopped in my X3440 and found one giant brick wall overclocking. The same mobo/CPU that was stable before are 4.2ghz can't even post over 150mhz bck. No amount of voltage or ram settings would get it to break 150mhz (3ghz). This means the XMP profile for ram doesn't work even though it is certed to work with the board. Should I complain and RMA the board AGAIN! or just deal with a board that obviously isn't working correctly?
Just on a side not even back at stock it would occasionally have issues in 1080P movies were it BSOD's even with full default settings...
Just on a side not even back at stock it would occasionally have issues in 1080P movies were it BSOD's even with full default settings...