• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

TPU 3D Printing Club

Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
Anyone here have a 3D printer? Share your stuff!

I'll add to this post and organize it as time goes on.


A couple months ago I picked up a Qidi Tech X-One 2 printer for 400 bucks. It was cheap, but it had really good ratings on Amazon. Other than premature bearing failure (cheap bearings/cheap printer) it's been great. I've replaced the bearings with Drylin bearings which are much quieter/smoother.

Right now, I'm just learning everything like working with different filaments, printer maintenance, slicer settings, upgrades, fixing 3D models for printing, etc. If anything this printer I have is perfect for learning on and the customer support is awesome to get your first print done right.

I just got done replacing the bearings.. basically doing a complete tear-down and am printing a "D&D Mini" right now. Things are coming out great! (There's a lot of support structure around the print, thus it looks strange currently). Here's a video of it working:

So, if anyone else is into this, post up some stuff you made or have or whatever! :D
 

dorsetknob

"YOUR RMA REQUEST IS CON-REFUSED"
Joined
Mar 17, 2005
Messages
9,105 (1.31/day)
Location
Dorset where else eh? >>> Thats ENGLAND<<<
:) there is a :) Market for a TPU De liding Tooltm 3d Printed of course
 
Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11

Solaris17

Super Dainty Moderator
Staff member
Joined
Aug 16, 2005
Messages
25,776 (3.79/day)
Location
Alabama
System Name Rocinante
Processor I9 14900KS
Motherboard EVGA z690 Dark KINGPIN (modded BIOS)
Cooling EK-AIO Elite 360 D-RGB
Memory 64GB Gskill Trident Z5 DDR5 6000 @6400
Video Card(s) MSI SUPRIM Liquid X 4090
Storage 1x 500GB 980 Pro | 1x 1TB 980 Pro | 1x 8TB Corsair MP400
Display(s) Odyssey OLED G9 G95SC
Case Lian Li o11 Evo Dynamic White
Audio Device(s) Moondrop S8's on Schiit Hel 2e
Power Supply Bequiet! Power Pro 12 1500w
Mouse Lamzu Atlantis mini (White)
Keyboard Monsgeek M3 Lavender, Akko Crystal Blues
VR HMD Quest 3
Software Windows 11
Benchmark Scores I dont have time for that.
yo thats a pretty sweet setup you got!
 

dorsetknob

"YOUR RMA REQUEST IS CON-REFUSED"
Joined
Mar 17, 2005
Messages
9,105 (1.31/day)
Location
Dorset where else eh? >>> Thats ENGLAND<<<
As i understand things you can download Pre configured print design/templates
No Idea from where but seen it mentioned on Stupidtube (those over the air geek gadget show)
 
Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
thingiverse.com seems to have the most stuff. Yeggi.com is a site that searches a lot of other sites for 3d models.
 

Morgoth

Fueled by Sapphire
Joined
Aug 4, 2007
Messages
4,226 (0.69/day)
Location
Netherlands
System Name Wopr "War Operation Plan Response"
Processor 5900x ryzen 9 12 cores 24 threads
Motherboard aorus x570 pro
Cooling air (GPU Liquid graphene) rad outside case mounted 120mm 68mm thick
Memory kingston 32gb ddr4 3200mhz ecc 2x16gb
Video Card(s) sapphire RX 6950 xt Nitro+ 16gb
Storage 300gb hdd OS backup. Crucial 500gb ssd OS. 6tb raid 1 hdd. 1.8tb pci-e nytro warp drive LSI
Display(s) AOC display 1080p
Case SilverStone SST-CS380 V2
Audio Device(s) Onboard
Power Supply Corsair 850MX watt
Mouse corsair gaming mouse
Keyboard Microsoft brand
Software Windows 10 pro 64bit, Luxion Keyshot 7, fusion 360, steam
Benchmark Scores timespy 19 104
i dont have a 3d printer i only do 3d modeling and let a third party do the manufacturing for me as in shapeways or weerg
 

Attachments

  • 19401974_10209234808211729_5203265766517420468_o.jpg
    19401974_10209234808211729_5203265766517420468_o.jpg
    80 KB · Views: 297
  • 19554650_602096996789121_4047836566558768091_n.jpg
    19554650_602096996789121_4047836566558768091_n.jpg
    100.5 KB · Views: 446
  • 20431347_10154746980080976_2286875916908339700_n.jpg
    20431347_10154746980080976_2286875916908339700_n.jpg
    46.4 KB · Views: 414
  • AEP Cylinder head Type 2.png
    AEP Cylinder head Type 2.png
    155.7 KB · Views: 471
Joined
Mar 28, 2018
Messages
1,792 (0.82/day)
Location
Arizona
System Name Space Heater MKIV
Processor AMD Ryzen 7 5800X
Motherboard ASRock B550 Taichi
Cooling Noctua NH-U14S, 3x Noctua NF-A14s
Memory 2x32GB Teamgroup T-Force Vulcan Z DDR4-3600 C18 1.35V
Video Card(s) PowerColor RX 6800 XT Red Devil (2150MHz, 240W PL)
Storage 2TB WD SN850X, 4x1TB Crucial MX500 (striped array), LG WH16NS40 BD-RE
Display(s) Dell S3422DWG (34" 3440x1440 144Hz)
Case Phanteks Enthoo Pro M
Audio Device(s) Edifier R1700BT, Samson SR850
Power Supply Corsair RM850x, CyberPower CST135XLU
Mouse Logitech MX Master 3
Keyboard Glorious GMMK 2 96%
Software Windows 10 LTSC 2021, Linux Mint
Been a while since the last post on this thread... oh well.

I got my printer up and running again, this time in its own dedicated spot on a table I built in 8th grade with a dedicated computer controlling it (the $20 ThinkCentre).

Hopefully it'll get more use now that it isn't hogging my desk space.
 
Joined
Feb 22, 2019
Messages
757 (0.41/day)
Nice printer!

I got an Ender model for Christmas last year and have used it a fair amount.

My most recent print was a slim mITX case. $5 in material and it functions perfectly. I’ll grab pics soon... if I remember. :D
 
Joined
Mar 28, 2018
Messages
1,792 (0.82/day)
Location
Arizona
System Name Space Heater MKIV
Processor AMD Ryzen 7 5800X
Motherboard ASRock B550 Taichi
Cooling Noctua NH-U14S, 3x Noctua NF-A14s
Memory 2x32GB Teamgroup T-Force Vulcan Z DDR4-3600 C18 1.35V
Video Card(s) PowerColor RX 6800 XT Red Devil (2150MHz, 240W PL)
Storage 2TB WD SN850X, 4x1TB Crucial MX500 (striped array), LG WH16NS40 BD-RE
Display(s) Dell S3422DWG (34" 3440x1440 144Hz)
Case Phanteks Enthoo Pro M
Audio Device(s) Edifier R1700BT, Samson SR850
Power Supply Corsair RM850x, CyberPower CST135XLU
Mouse Logitech MX Master 3
Keyboard Glorious GMMK 2 96%
Software Windows 10 LTSC 2021, Linux Mint
Nice printer!

I got an Ender model for Christmas last year and have used it a fair amount.

My most recent print was a slim mITX case. $5 in material and it functions perfectly. I’ll grab pics soon... if I remember. :D
I've had this Anet A8 since September of 2018. I highly recommend it as a budget starter printer if you like tinkering with things. It has a low up-front cost, works well out of the box, and it's really easy to upgrade. I'd imagine with a Bowden extruder and head setup, better belts and bearings, and a sturdier frame (all of which aren't too expensive to make/buy), it could rival much higher end units in print quality.

Never really considered trying to print an ITX case; probably just assumed the 200x200mm bed wouldn't be big enough.
 
Joined
Mar 28, 2018
Messages
1,792 (0.82/day)
Location
Arizona
System Name Space Heater MKIV
Processor AMD Ryzen 7 5800X
Motherboard ASRock B550 Taichi
Cooling Noctua NH-U14S, 3x Noctua NF-A14s
Memory 2x32GB Teamgroup T-Force Vulcan Z DDR4-3600 C18 1.35V
Video Card(s) PowerColor RX 6800 XT Red Devil (2150MHz, 240W PL)
Storage 2TB WD SN850X, 4x1TB Crucial MX500 (striped array), LG WH16NS40 BD-RE
Display(s) Dell S3422DWG (34" 3440x1440 144Hz)
Case Phanteks Enthoo Pro M
Audio Device(s) Edifier R1700BT, Samson SR850
Power Supply Corsair RM850x, CyberPower CST135XLU
Mouse Logitech MX Master 3
Keyboard Glorious GMMK 2 96%
Software Windows 10 LTSC 2021, Linux Mint
Really wish there were more posts on this thread.

Today I printed some CPU cases. I printed them out of PLA, and each one took about 40 minutes to print with the infill set to 20%.


Even though they are designed for 115X chips, 775 chips fit just fine in them. Here they are holding my Pentium E5200 and Core 2 Duo E8600.

I calculate the material cost to be about $0.25 (based on $20 for a 330 meter spool of PLA). Cheaper than buying CPU clamshells on Amazon.

Thingiverse link for STL: https://www.thingiverse.com/thing:2441017
 
Last edited:
Joined
Mar 28, 2018
Messages
1,792 (0.82/day)
Location
Arizona
System Name Space Heater MKIV
Processor AMD Ryzen 7 5800X
Motherboard ASRock B550 Taichi
Cooling Noctua NH-U14S, 3x Noctua NF-A14s
Memory 2x32GB Teamgroup T-Force Vulcan Z DDR4-3600 C18 1.35V
Video Card(s) PowerColor RX 6800 XT Red Devil (2150MHz, 240W PL)
Storage 2TB WD SN850X, 4x1TB Crucial MX500 (striped array), LG WH16NS40 BD-RE
Display(s) Dell S3422DWG (34" 3440x1440 144Hz)
Case Phanteks Enthoo Pro M
Audio Device(s) Edifier R1700BT, Samson SR850
Power Supply Corsair RM850x, CyberPower CST135XLU
Mouse Logitech MX Master 3
Keyboard Glorious GMMK 2 96%
Software Windows 10 LTSC 2021, Linux Mint
Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
My printer has been in pieces all winter, but I got some parts in and am piecing it back together. Last thing I made was an Atari for a Raspberry Pi 3 for a RetroPie system. It's printed out of carbon fiber PLA with a little paint. The wood grain is drawer liner sticky paper and I got the Atari logo from a nice gent on Etsy.

122561


STL's: https://www.thingiverse.com/thing:2269086
 
Last edited:
Joined
Mar 28, 2018
Messages
1,792 (0.82/day)
Location
Arizona
System Name Space Heater MKIV
Processor AMD Ryzen 7 5800X
Motherboard ASRock B550 Taichi
Cooling Noctua NH-U14S, 3x Noctua NF-A14s
Memory 2x32GB Teamgroup T-Force Vulcan Z DDR4-3600 C18 1.35V
Video Card(s) PowerColor RX 6800 XT Red Devil (2150MHz, 240W PL)
Storage 2TB WD SN850X, 4x1TB Crucial MX500 (striped array), LG WH16NS40 BD-RE
Display(s) Dell S3422DWG (34" 3440x1440 144Hz)
Case Phanteks Enthoo Pro M
Audio Device(s) Edifier R1700BT, Samson SR850
Power Supply Corsair RM850x, CyberPower CST135XLU
Mouse Logitech MX Master 3
Keyboard Glorious GMMK 2 96%
Software Windows 10 LTSC 2021, Linux Mint
Printed stands for my newly acquired Klipsch ProMedia speakers...





Very simple, but they help to aim the speakers at my ears instead of my chest. Each stand took about an hour and a half to print.

My post on Thingiverse

The project file for these stands

In other news, my first spool of PLA filament is about to run out. I've had it for 15 months. I've learned the hard way that PLA filament needs to be kept in sealed bags with desiccant when not in use; otherwise it gets really brittle. I'm planning on getting this spool of OVERTURE brand PLA. Anyone have experience with it?
 
Joined
Mar 28, 2018
Messages
1,792 (0.82/day)
Location
Arizona
System Name Space Heater MKIV
Processor AMD Ryzen 7 5800X
Motherboard ASRock B550 Taichi
Cooling Noctua NH-U14S, 3x Noctua NF-A14s
Memory 2x32GB Teamgroup T-Force Vulcan Z DDR4-3600 C18 1.35V
Video Card(s) PowerColor RX 6800 XT Red Devil (2150MHz, 240W PL)
Storage 2TB WD SN850X, 4x1TB Crucial MX500 (striped array), LG WH16NS40 BD-RE
Display(s) Dell S3422DWG (34" 3440x1440 144Hz)
Case Phanteks Enthoo Pro M
Audio Device(s) Edifier R1700BT, Samson SR850
Power Supply Corsair RM850x, CyberPower CST135XLU
Mouse Logitech MX Master 3
Keyboard Glorious GMMK 2 96%
Software Windows 10 LTSC 2021, Linux Mint
Guess I'm taking this thread over :ohwell:.

My new filament spool arrived a few days ago and I've printed several things since it arrived.



...like this CPU delidding tool. It needs a few more parts in order to work.



I just printed this case for my Raspberry Pi 3B.




As for the filament, it seems to be similar quality to the HATCHBOX stuff despite being $7 cheaper. It included a build surface for my printer.
 

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
Hey guys newbie here that just purchased a Anent A8 with no skills
 
Joined
Jan 5, 2006
Messages
17,693 (2.66/day)
System Name AlderLake / Laptop
Processor Intel i7 12700K P-Cores @ 5Ghz / Intel i3 7100U
Motherboard Gigabyte Z690 Aorus Master / HP 83A3 (U3E1)
Cooling Noctua NH-U12A 2 fans + Thermal Grizzly Kryonaut Extreme + 5 case fans / Fan
Memory 32GB DDR5 Corsair Dominator Platinum RGB 6000MHz CL36 / 8GB DDR4 HyperX CL13
Video Card(s) MSI RTX 2070 Super Gaming X Trio / Intel HD620
Storage Samsung 980 Pro 1TB + 970 Evo 500GB + 850 Pro 512GB + 860 Evo 1TB x2 / Samsung 256GB M.2 SSD
Display(s) 23.8" Dell S2417DG 165Hz G-Sync 1440p / 14" 1080p IPS Glossy
Case Be quiet! Silent Base 600 - Window / HP Pavilion
Audio Device(s) Panasonic SA-PMX94 / Realtek onboard + B&O speaker system / Harman Kardon Go + Play / Logitech G533
Power Supply Seasonic Focus Plus Gold 750W / Powerbrick
Mouse Logitech MX Anywhere 2 Laser wireless / Logitech M330 wireless
Keyboard RAPOO E9270P Black 5GHz wireless / HP backlit
Software Windows 11 / Windows 10
Benchmark Scores Cinebench R23 (Single Core) 1936 @ stock Cinebench R23 (Multi Core) 23006 @ stock
Guess I'm taking this thread over :ohwell:.

My new filament spool arrived a few days ago and I've printed several things since it arrived.



...like this CPU delidding tool. It needs a few more parts in order to work.



I just printed this case for my Raspberry Pi 3B.




As for the filament, it seems to be similar quality to the HATCHBOX stuff despite being $7 cheaper. It included a build surface for my printer.

So how many days of printing for just these 2 things?...
 
Joined
Mar 28, 2018
Messages
1,792 (0.82/day)
Location
Arizona
System Name Space Heater MKIV
Processor AMD Ryzen 7 5800X
Motherboard ASRock B550 Taichi
Cooling Noctua NH-U14S, 3x Noctua NF-A14s
Memory 2x32GB Teamgroup T-Force Vulcan Z DDR4-3600 C18 1.35V
Video Card(s) PowerColor RX 6800 XT Red Devil (2150MHz, 240W PL)
Storage 2TB WD SN850X, 4x1TB Crucial MX500 (striped array), LG WH16NS40 BD-RE
Display(s) Dell S3422DWG (34" 3440x1440 144Hz)
Case Phanteks Enthoo Pro M
Audio Device(s) Edifier R1700BT, Samson SR850
Power Supply Corsair RM850x, CyberPower CST135XLU
Mouse Logitech MX Master 3
Keyboard Glorious GMMK 2 96%
Software Windows 10 LTSC 2021, Linux Mint
So how many days of printing for just these 2 things?...
If I remember, the Pi case probably took 30 min to an hour, and the delidding tool took a couple hours.

Hey guys newbie here that just purchased a Anent A8 with no skills
I'd recommend starting with PLA filament. It's cheap, prints at a lower temp, is safe to use without extreme ventilation, and has a sweet smell when it melts.

I use Repetier-Host for controlling mine, but it can read GCODE files off of a microSD card.

A lot of people recommend putting custom firmware on the A8 such as Marlin or Skynet. Some printers (like mine) can't be flashed over USB and you need a programmer for it.

I'd start by printing a better fan duct and some toppers for the leadscrews (assuming you've already assembled it and gotten it working).
 

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
Printer just arrived

20200214_174938.jpg


Going to spend the night putting it together
 
Joined
Mar 28, 2018
Messages
1,792 (0.82/day)
Location
Arizona
System Name Space Heater MKIV
Processor AMD Ryzen 7 5800X
Motherboard ASRock B550 Taichi
Cooling Noctua NH-U14S, 3x Noctua NF-A14s
Memory 2x32GB Teamgroup T-Force Vulcan Z DDR4-3600 C18 1.35V
Video Card(s) PowerColor RX 6800 XT Red Devil (2150MHz, 240W PL)
Storage 2TB WD SN850X, 4x1TB Crucial MX500 (striped array), LG WH16NS40 BD-RE
Display(s) Dell S3422DWG (34" 3440x1440 144Hz)
Case Phanteks Enthoo Pro M
Audio Device(s) Edifier R1700BT, Samson SR850
Power Supply Corsair RM850x, CyberPower CST135XLU
Mouse Logitech MX Master 3
Keyboard Glorious GMMK 2 96%
Software Windows 10 LTSC 2021, Linux Mint
Printer just arrived

View attachment 144848

Going to spend the night putting it together
Good luck. It's a tricky one to assemble, but it's extremely easy to upgrade.

I ended up having to lubricate the leadscrews on mine to keep the y-axis from getting stuck.

That top part looks like the support for the bed. I guess that piece isn't made of metal anymore.
 

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
Good luck. It's a tricky one to assemble, but it's extremely easy to upgrade.

I ended up having to lubricate the leadscrews on mine to keep the y-axis from getting stuck.

That top part looks like the support for the bed. I guess that piece isn't made of metal anymore.
Man i have been at this for hours and still not finished

The manual isn't very detailed or straight forward

Also received a Tronxy P802E not a Anent A8
20200214_192337_HDR.jpg


20200214_212131_HDR.jpg


20200214_222000_HDR.jpg


20200214_230244.jpg
 
Joined
Mar 28, 2018
Messages
1,792 (0.82/day)
Location
Arizona
System Name Space Heater MKIV
Processor AMD Ryzen 7 5800X
Motherboard ASRock B550 Taichi
Cooling Noctua NH-U14S, 3x Noctua NF-A14s
Memory 2x32GB Teamgroup T-Force Vulcan Z DDR4-3600 C18 1.35V
Video Card(s) PowerColor RX 6800 XT Red Devil (2150MHz, 240W PL)
Storage 2TB WD SN850X, 4x1TB Crucial MX500 (striped array), LG WH16NS40 BD-RE
Display(s) Dell S3422DWG (34" 3440x1440 144Hz)
Case Phanteks Enthoo Pro M
Audio Device(s) Edifier R1700BT, Samson SR850
Power Supply Corsair RM850x, CyberPower CST135XLU
Mouse Logitech MX Master 3
Keyboard Glorious GMMK 2 96%
Software Windows 10 LTSC 2021, Linux Mint
Man i have been at this for hours and still not finished

The manual isn't very detailed or straight forward

Also received a Tronxy P802E not a Anent A8
View attachment 144856

View attachment 144857

View attachment 144858

View attachment 144859
It's certainly coming together. Looks very similar to the A8.

Yeah, the lackluster instructions are a common complaint with the A8 and similar printers. It took a few hours for me to assemble my A8 (though I already had experience since my old job trained me on it)
 

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
It's certainly coming together. Looks very similar to the A8.

Yeah, the lackluster instructions are a common complaint with the A8 and similar printers. It took a few hours for me to assemble my A8 (though I already had experience since my old job trained me on it)
I think its a A8 clone based off what I've found on google. But for $70 no biggie

I stopped off on it as i got tired and had to be yo work in like hours :roll:

Hopefully tonight i can finish it. I've been looking at several videos piecing them together to help assemble this but even than it's not 100%
 
Top