TPU's F@H Team

[bogmali]

Forget the box!!!!

GO mmaakk's style: NAKED

+1

 

[mmaakk]

 

[mike047]

Just put a 260 on.....waiting for work

 

[oily_17]

Well I have been down for about a day or so with some problems and just noticed these new 5514 wu's, 430 pointers.

They seem to be even less ppd than the 511 point wu's.Will have to keep an eye on the heat out put as well

 

[BUCK NASTY]

Well I have been down for about a day or so with some problems and just noticed these new 5514 wu's, 430 pointers.

They seem to be even less ppd than the 511 point wu's.Will have to keep an eye on the heat out put as well

Yea, I saw you have been down for a few days. Anything we can help with?

 

[oily_17]

Yea, I saw you have been down for a few days. Anything we can help with?

Thanks Buck!! but all is good so far.

Been swapping out some parts and installing new OS's, just trying to tidy this mess up

Have to do some more rewiring work in the attic, as I have now moved two rigs up there (the wife could not stand the noise in our spare room )


Got myself a K9A2 Platinum, so hope to add a couple more 260's to the mix by next month

 

[BUCK NASTY]

Thanks Buck!! but all is good so far.

Been swapping out some parts and installing new OS's, just trying to tidy this mess up

Have to do some more rewiring work in the attic, as I have now moved two rigs up there (the wife could not stand the noise in our spare room )


Got myself a K9A2 Platinum, so hope to add a couple more 260's to the mix by next month

Excellent, nothing like more fuel for the TPU fire!

http://img.techpowerup.org/090519/Naked_Rigs.jpg

+2

 

[bogmali]

I had to remove the GTX275 last night from folding but was replaced by 2 9800GTX+. I'm making room for a GTX295 coming in next week along with another Core i7 courtesy of Loonym

 

[oily_17]

That's what I was hoping to do...4x GTX260's on the one board, just wasn't sure about the space, but it is looking good

Plus it will take up less space and I may be able to add another board down the line.

 

[bogmali]

That's what I was hoping to do...4x GTX260's on the one board, just wasn't sure about the space.

Look at my tech bench setup. That is a K9A2 with 2 8800GTS/2 8800GS Look at the spacing of each card. The GTS is a dual-slot while the GS is single. The problem that you're going to run into with 4x GTX260 (even with just 2) is the length of that card is going to cover your SATA ports (only thing I hate about the K9A2) and your panel connectors. My 2nd K9A2 has a 9800GX2 ATM and that is the only card I can put in there because the 9800GTX+'s covered up the ports:shadedshu so when I get my 295, I'm putting the GTS20 in there since they're shorter than the 9800GTX+'s.

 

[oily_17]

@bogmali....I was thinking that they would cover the sata ports...wonder if you could get a 90* angled sata cable squeezed in there.

Is mmaakk running 4 double slot cards on his, where does that sata cable go??

 

[bogmali]

@bogmali....I was thinking that they would cover the sata ports...wonder if you could get a 90* angled sata cable squeezed in there.

Is mmaakk running 4 double slot cards on his, where does that sata cable go??

I tried with a 90 degree angle SATA cable but I couldn't get it to boot with the angled side plugged into the board I remove the 9800 and switched the cable and everything is gravy

 

[oily_17]

Yeah, I may just grab another 2 9600GSO's and put those on instead.

Have to get a CPU for it first..this has me bugged now..cant wait till get it fired up

EDIT:will PM mmaakk, I cant tell from the pic how his sata cable is installed ??

 

[Hayder_Master]

im in under my name hayder.master

 

[bogmali]

im in under my name hayder.master

Welcome

 

[bogmali]

Yeah, I may just grab another 2 9600GSO's and put those on instead.

Have to get a CPU for it first..this has me bugged now..cant wait till get it fired up

EDIT:will PM mmaakk, I cant tell from the pic how his sata cable is installed ??

I'm going to mix my 9800GX2 along with 2 GTS250 with my other K9A2 for my 2nd farm, hope I have enough juice in my PSU to power those bad boys

 

[oily_17]

Welcome hayder.master.

@ bogmali...that is another problem I may just run two psu for my set up, although I have an Antec Signature 850W in another build...more swapping of parts might be called for.

 

[bogmali]

I'm currently running a Corsair TX850 on that one.

 

[Hayder_Master]

Welcome

Welcome hayder.master.

@ bogmali...that is another problem I may just run two psu for my set up, although I have an Antec Signature 850W in another build...more swapping of parts might be called for.

thanx a lot kindly guys , im very happy , glad , proud cuz you make me folding and to join with TPU team , god bless you guys

 

[bogmali]

thanx a lot kindly guys , im very happy , glad , proud cuz you make me folding and to join with TPU team , god bless you guys

You're more than welcome

Out of curiosity, where in Iraq are you from?

 

[BUCK NASTY]

I tried with a 90 degree angle SATA cable but I couldn't get it to boot with the angled side plugged into the board I remove the 9800 and switched the cable and everything is gravy

It can be done on a K9A2 Platinum. BTW, it's the best multi-GPU folding MOBO ever made.

 

[oily_17]

Thanks Buck, thats a tight fit in there.

 

[pepsi71ocean]

Having trouble with the CPU version of F@H. it is not sending the results, it has been say9ing Attempting to send results for 3 days now. any ideas?

The GPU version works just fine, but im not sure why the CPU one doesn't want to work.

[23:40:23] + Attempting to send results [May 23 23:40:23 UTC]
[23:40:23] Core required: FahCore_78.exe
[23:40:23] Core found.
[23:40:23] Working on queue slot 09 [May 23 23:40:23 UTC]
[23:40:23] + Working ...
[23:40:24]
[23:40:24] *------------------------------*
[23:40:24] Folding@Home Gromacs Core
[23:40:24] Version - Server reports packet it received an incomplete payload.
[23:40:24] (May be due to packet loss during network transmission or a corrupted file.)
[23:40:24] - Error: Could not transmit unit 07 (completed May 20) to work server.


[23:40:24] + Attempting to send results [May 23 23:40:24 UTC]
[23:40:24] - Couldn't send HTTP request to server
[23:40:24] (Got status 503)
[23:40:24] + Could not connect to Work Server (results)
[23:40:24] (171.67.108.17:8080)
[23:40:24] + Retrying using alternative port
[23:40:24] 1.90 (March 8, 2006)
[23:40:24]
[23:40:24] Preparing to commence simulation
[23:40:24] - Ensuring status. Please wait.
[23:40:24] - Couldn't send HTTP request to server
[23:40:24] (Got status 503)
[23:40:24] + Could not connect to Work Server (results)
[23:40:24] (171.67.108.17:80)
[23:40:24] Could not transmit unit 07 to Collection server; keeping in queue.
[23:40:41] - Looking at optimizations...
[23:40:41] - Working with standard loops on this execution.
[23:40:41] - Previous termination of core was improper.
[23:40:41] - Files status OK
[23:41:04] - Expanded 9250792 -> 47924691 (decompressed 53.7 percent)
[23:41:07]
[23:41:07] Project: 2613 (Run 68, Clone 13, Gen 69)
[23:41:07]
[23:41:07] Entering M.D.
[23:41:31] (Starting from checkpoint)
[23:41:31] Protein: p2613_TETHERED VESICLES
[23:41:31]
[23:41:31] Writing local files
[23:41:31] Completed 20676 out of 125000 steps (17%)

 

[oily_17]

Seems like you have a corrupted work unit

[23:40:24] Version - Server reports packet it received an incomplete payload.
[23:40:24] (May be due to packet loss during network transmission or a corrupted file.)
[23:40:24] - Error: Could not transmit unit 07 (completed May 20) to work server.

Just delete the work unit from the queue and you should be ok.

EDIT:If it is just the 1 WU then it probably is corrupt but if you keep getting the "503 error" then it is due to a server being down probably.

 

[trt740]

Just put a 260 on.....waiting for work

I know that 260gtx it's my old beast and my new 285gtx was junk so i'm outta the game tell a replacement comes back.