TPU's Rosetta Milestones and Daily Pie Thread

[phill]

Well here we are again with the Rosetta Pie Stats update for the 19th May 2022.....

And now for the milestones and stoners for the day.....

Sadly no stoners for the day but hopefully @Zachary85 might hit one soon enough if he's the only one able to get any work units!! Great work man for keeping going and hope its all going well! Hopefully everyone is having a good day and is alright Take care everyone, hope you enjoy the weekend!!

 

[phill]

Well here we are again for the 20th May 2022, Rosetta Pie Stats update......

And now for the milestones and stoners for the day.....

Sadly no stoners today but hopefully more so for tomorrow, we might actually have someone else being able to contribute along with Zachery85!! Would be nice I think to have some company on the stats
Hopefully everyone is doing well and is ok, hope everyone is having a good weekend so far!! Take care everyone, see you all again soon I hope!

 

[phill]

And here we go for the Rosetta Pie Stats for the 21st May 2022....

And now for the milestones and stoners for the day??......

Sadly no one today but hope to see someone on there soon Well, that's if anyone can get any work units to actually get some points....... Still here's hoping we can get some more points soon and some more members returning some work, if possible

Still, think that will do for the moment, best leave now or I'll really do some damage!! Take care everyone and all Hope to see you soon!!

 

[mstenholm]

And here we go for the Rosetta Pie Stats for the 21st May 2022....

Sadly no one today but hope to see someone on there soon Well, that's if anyone can get any work units to actually get some points....... Still here's hoping we can get some more points soon and some more members returning some work, if possible

Still, think that will do for the moment, best leave now or I'll really do some damage!! Take care everyone and all Hope to see you soon!!

Just got 8 split on two machines. I just hope they all run the full 8 hours.

 

[mstenholm]

Last change for some Rosetta before WCG kicks in. I just got 110 WUs.

Edit: @phill got them first, 72 to be precise, others seem to be less lucky.
These Roberta (rb_date in the name) are strange as always - 100% load on my 2700Xs is only 160-165W at the wall @50 degree C. WCG is 220W and 63-65 C. The programming is not using the processor fully for sure.

Edit 2: I hate Rosetta . The upside of one of my MSIs with new bios that errored out all but one WU is that I finally learned how to change the VDIMM. Delete AUTO, not enter, and write the wanted new value. 1.36V was good for two sticks but apparently not for four, at least not with Roberta WUs. Well my other MSI 2700X didn’t give me errors but shitty points. I still have to see if my 14 jobs on the 3900X come anywhere close to when it run four (90-110 points/hr), I doubt.

Ordered a Noctua AMD mounting mechanism for a D15 and 5950X to replace a 2700X today. I will report back in a week or so.

 

[phill]

I checked my 6700k and it showed a few work units, I was most happy!! Shut down for tonight but hopefully back on tomorrow all things being sunny

I think my 3900X I had pegged around 140w full system for 100% load for Rosetta or WCG (I think it might have been WCG....? Will have to check) which is about the same as the 6700k for a 1/3 of the threads... AMD is impressive in that regard for sure

Will report back as soon as I can tomorrow with some progress. Think they had done about 20% when I shut the PC down this evening...

 

[phill]

Well here we go for Rosetta Pie Stats updates for the 22nd May 2022.....

And now for the milestones and stoners for the day....

Sadly no stoners today but there's another chance I'm pretty sure coming up...
Well hopefully @Zachary85 isn't as lonely today but hopefully tomorrow there might be some more members there.... Here's hoping right?? I hope everyone is doing well and is alright Take care everyone!!

 

[phill]

And here we go for the 23rd May 2022 for the Rosetta Pie Stats update...........

And here we are again for the milestones and stoners for the day.........

@Zachary85 !!

Well done to our @Zachary85 for hitting his next milestone, congrats!! We'll hopefully see you up again not to long with some luck!!
I hope that everyone else is doing well and is ok?? I hope to see as I'm sure everyone who takes part in Rosetta, hopes to see their name on the next updates!! I believe our good @mstenholm has said that there's been a few work units floating about today so hopefully they don't all suck and will actually give us some points.... So problematic, so frustrating!!

Still, great news there @mstenholm for the 5950X, it's a beast!! Gone with 64GB of RAM for both of my 3950X and 5950X CPUs just in case.. WCG can get also quite hungry for RAM depending on what work you do... Be interested in how you get on with your CPU!! Wishing you all the best for getting a good one!!

Take care everyone, look forward to seeing you all tomorrow for another update!!

 

[Zachary85]

I'm heading out of town for a few days and I will be shutting down the PC while I'm gone.

 

[phill]

Well hi everyone!! Hope everyone is doing well and is ok?? Here we go for the Rosetta Pie Stats update for the 24th May 2022.....

And now for the milestones and stoners for the day.....

Well sadly no one today but never mind
I hope everyone is doing well and is ok?? I've been able to crunch a bit today thankfully so, hopefully I might have some points on the board tomorrow! Chance would be nice.... I trust everyone has had a good day today?? Here's hoping to catching up with you all tomorrow for another update!! Take care everyone!! Hope to see you for the next one!

 

[Nordic]

I downloaded a lot of Rosetta today.

 

[mstenholm]

I downloaded a lot of Rosetta today.

Yes you did, 268 to be precise. These jobs are power hungry - my two 2700X machines pull 235 and 250 W from the wall and that is with air cooling and stock settings. The stock 3900X with 16 jobs and water cooling pulls 215 W. @phill and @Nordic any change you have some numbers? Or other members?

 

[Nordic]

Yes you did, 268 to be precise. These jobs are power hungry - my two 2700X machines pull 235 and 250 W from the wall and that is with air cooling and stock settings. The stock 3900X with 16 jobs and water cooling pulls 215 W. @phill and @Nordic any change you have some numbers? Or other members?

Without pulling my kill-a-watt out, I can only say that HWINFO says I am using 195w CPU package info. Despite my hefty overclock running 4500mhz in multi threaded benchmarks, my CPU is only running at ~4060mhz with Rosetta work, likely due to heat constraints. With quality air cooling I am at 90c.

I have been meaning to set up water cooling for this system. My performance is thermally limited in both benchmarks and boinc.

 

[phill]

Yes you did, 268 to be precise. These jobs are power hungry - my two 2700X machines pull 235 and 250 W from the wall and that is with air cooling and stock settings. The stock 3900X with 16 jobs and water cooling pulls 215 W. @phill and @Nordic any change you have some numbers? Or other members?

I'll grab some for you tomorrow @mstenholm I had the system on before the message and will need to venture upstairs to grab a watt meter so will do that and plug in tomorrow Will report back for you I have pegged my 3900X's at 3.6GHz (or more so, 1.00 to 1.15vcore) just due to heat and wattage. Didn't see the need to have it running more than and max out overclocks, just 'wears' out the hardware and puts a massive strain on it as well. I always try to keep temps (air or water) about 50C when using Bonic, I don't want it higher if its running 247 so to speak at 100% load all the time I try to protect it since they ain't gonna replace my hardware if it goes bang Besides, I'm not honestly sure if it will help with the points that much with how much energy/electric you'll eat through. My full custom looped 5950X and 3090 will eat 150w idle before any CPU load. That does however cover two D5 pumps, 12 140mm EK Vardar fans, plus about 6 SSDs (two NVME and four SATA SSDs.. not that they would add much power wise.) oh and an optical drive too I think that's all that's in there....

Without pulling my kill-a-watt out, I can only say that HWINFO says I am using 195w CPU package info. Despite my hefty overclock running 4500mhz in multi threaded benchmarks, my CPU is only running at ~4060mhz with Rosetta work, likely due to heat constraints. With quality air cooling I am at 90c.

I have been meaning to set up water cooling for this system. My performance is thermally limited in both benchmarks and boinc.

I'd definitely considering lowering the overclock when running WCG or Rosetta, high temps like that I can't imagine will help the hardware all that much and its rather warm at 90C.. Had it when I first had my 3900X, messed about with the voltage settings and at best I was hitting around 40C under 100% load where in the summer months it might hit 50C maybe as high as 55C depending on the temps we had.

Just my 2p

 

[Nordic]

I'll grab some for you tomorrow @mstenholm I had the system on before the message and will need to venture upstairs to grab a watt meter so will do that and plug in tomorrow Will report back for you I have pegged my 3900X's at 3.6GHz (or more so, 1.00 to 1.15vcore) just due to heat and wattage. Didn't see the need to have it running more than and max out overclocks, just 'wears' out the hardware and puts a massive strain on it as well. I always try to keep temps (air or water) about 50C when using Bonic, I don't want it higher if its running 247 so to speak at 100% load all the time I try to protect it since they ain't gonna replace my hardware if it goes bang Besides, I'm not honestly sure if it will help with the points that much with how much energy/electric you'll eat through. My full custom looped 5950X and 3090 will eat 150w idle before any CPU load. That does however cover two D5 pumps, 12 140mm EK Vardar fans, plus about 6 SSDs (two NVME and four SATA SSDs.. not that they would add much power wise.) oh and an optical drive too I think that's all that's in there....

I'd definitely considering lowering the overclock when running WCG or Rosetta, high temps like that I can't imagine will help the hardware all that much and its rather warm at 90C.. Had it when I first had my 3900X, messed about with the voltage settings and at best I was hitting around 40C under 100% load where in the summer months it might hit 50C maybe as high as 55C depending on the temps we had.

Just my 2p

I don't want to turn on the overclock before gaming. It isn't a dedicated cruncher. If it was I would undervolt it. 90c is well below the max safe specifications. AMD chips are designed to overclock themselves to the thermal limit.

 

[phill]

And here we go for the Rosetta Pie Stats update for the 25th May 2022!!

And now for the milestones and stoners for the day......

And sadly no more stoners today but another time perhaps It seems we have a few more points coming in today which is amazing, great support there guys!! If I can get my 6700k over the 2 million points contributed, I'll switch it out with my other 3900X and get that crunching it as well I think Then the rest of the hardware I got can go towards WCG and folding

Awesome efforts today guys, hope to see you and some more members back tomorrow for the next update!! Take care everyone!! See you soon hopefully, hope that you've all had a great day!!

 

[Toothless]

So one of my cats turned on the dual x5675 server and it pulled Rosetta tasks. Guess I'm gonna have some points.

I'm at work. That server was off when I left.

 

[phill]

Well here we are again everyone, Rosetta Pie Stats update for the 26th May 2022....

And now for the milestones and stoners for the day??.....

@Nordic !!!
@Arjai !!
@xrobwx71 !!

Well done everyone for the support today for the contribution, its a brilliant day and always is when we actually have some work to return!! Great work everyone and massive thanks to the continued support to this upside down and upsetting work.. I'd like to think it'll get better but I'm not sure...

Still, take care everyone and massive thanks again for the support. Massive respect and appreciation!! Hope to see you all again tomorrow for another update!!

 

[phill]

Well here we are for the Rosetta Pie Stats update for the 27th May 2022......

And now for the milestones and stoners for the day....

Sadly no one today but with contributions like FAH for Rosetta, I REALLY don't think there's any issues here!! Wow everyone, what a solid contribution for the day!! That's outstanding, I'm very impressed !! I hope we can keep going at this level, here's hoping shall we??

With some luck my 6700k should have enough points soon so that I can shut it down and retire that so I can my other AMD systems can hopefully get back and working Here's hoping that WCG comes back online soon as well, so I can get some more running too!! Might have to watch that power draw......

Amazing efforts everyone, massive respect and thanks to you all supporting team TPU in Rosetta

 

[mstenholm]

A small warning to people with ADL, Adler Lake running Windows 10 - Rosetta is a case story of programs that doesn’t work well with Windows 10, like WCG. Funny enough Python jobs seem to work fine in this case of mixed Python and ordinary Rosetta.

I’m on my IPAD and my only working PC with Windows not busy doing Rosetta is hidden under plastic due to my office is under renovation . In short you have to open the link to see what I about - Rosetta is only using 41% of the CPU cycles (run time 69309 s, cpu time 28529 s as an example).

12600K/Windows 10 not optimal for Rosetta

Edit: I found a 12700KF/Windows 10 that ran normal Rosetta but not at 100% and here there wasn’t the same problem. Anyway if you want to try out your new ADL then check the result. Well you ought to check with any CPU.

 

[phill]

Well here we go for some Rosetta Stats Updates for the 28th May 2022....

And now for the milestones and stoners for the day.....

@Nordic !!

Well done there James for the hitting the next milestone, hope to see you back again soon!! Another outstanding day everyone, really superb contributions for today and a great contribution from team TPU!! Nice one everyone, hopefully tomorrow is another day like today

I hope everyone is doing well and is alright Hopefully get to see you all again tomorrow for team another update

 

[mstenholm]

I can see that you missed a milestone @phill, your own 2 mill for the 6700k.
Time for retirement for a more efficient 3900X?

 

[phill]

I can see that you missed a milestone @phill, your own 2 mill for the 6700k.
Time for retirement for a more efficient 3900X?

Sure is sir, got the last few work units to clear from the machine and then it'll be 3900X in replacement

 

[Nordic]

I have been meaning to sell my 3900x and x570 motherboard. It has been almost a year without putting it online. It has lost a lot of value as I waited. I am considering pulling it out for crunching now.

 

[phill]

Here we go for the Rosetta Pie Stats update for the 29th May 2022!!.......

And now for the milestones and stoners for the day??......

@xrobwx71 !!

Great work to @xrobwx71 for hitting his next milestone!! Great stuff indeed and as for everyone's contributions what an amazing sight!! Very nice scores from everyone today, TPU has had some great days recently, long may it continue!!

I hope everyone is doing well and is alright Hope to hear from you all soon!!