GIGGLA
New Member
- Joined
- Nov 15, 2004
- Messages
- 156 (0.02/day)
System Name | PsychoTron |
---|---|
Processor | Intel Q9450 @ 3.2 |
Motherboard | Asus p5e (x38) @ 400 fsb Rampage Formula Bios |
Cooling | Arctic Freezer Pro Antec 900 Case Fans |
Memory | 4gb G.Skill ddr2-1000 |
Video Card(s) | MSI 280GTX @ 702/1404/1200 |
Storage | 2X Seagate 500gb Raid-0 @7200rpm |
Display(s) | 24" Dell Widescreen LCD 1920x1200 5ms |
Case | Antec 900 |
Audio Device(s) | Onboard Supreme FX 2 |
Power Supply | 750 watt pc power & cooling Crossfire edition |
Software | Windows Vista Home Premium SP2 64-bit |
Hi all, I have a Netgear wireless USB adapter WG111v3. It has stopped working with my Windows Vista64 PC, it is detected but the driver won't install properly and the light on the device does'nt light up. It works fine on my other machine with Windows XP.
It's not the device but the pc. It stopped working once before (another time) on the Vista machine and I fixed it by using system restore. This time though I don't have a restore point far enough back.
I've tried uninstalling/reinstalling from cd and from updated firmware download, the correct steps. I've also tried updating the driver in device manager directly from driver folder.
The light on the device should always light up immediately whenever first plugging in, not so now. Any insight much appreciated!
It's not the device but the pc. It stopped working once before (another time) on the Vista machine and I fixed it by using system restore. This time though I don't have a restore point far enough back.
I've tried uninstalling/reinstalling from cd and from updated firmware download, the correct steps. I've also tried updating the driver in device manager directly from driver folder.
The light on the device should always light up immediately whenever first plugging in, not so now. Any insight much appreciated!