Unigine Benchmark Compilation

[H82LUZ73]

true but i have 2 cards properly configured in crossfire so i should be scoring higher

anyway win 7 install time bye bye

Try installing SP2 for Vista first .Also run just 1 card.Could be those crossfire bridges.I used 10.1 driver.

 

[Binge]

I'll see how much of a difference it makes running full screen in that same setup..
(because, yes. your score is crap )

I need you to rebench and make sure tessellation is on. If you turned it off at any point it may not be on by default. TBH your scores are a bit too high for a single 5850.

 

[jjFarking]

I need you to rebench and make sure tessellation is on. If you turned it off at any point it may not be on by default. TBH your scores are a bit too high for a single 5850.

?
Happy to do so, but I also posted the full-screen run, which was actually faster.
And yes, it's on by default for DX11

 

[ste2425]

ste2425|Palit 4850|625/993|664|E8200 @2.66 - heaven dx10

 

[Binge]

?
Happy to do so, but I also posted the full-screen run, which was actually faster.
And yes, it's on by default for DX11

I'm going to continue to be skeptical. and all you want but nobody gets scores that high in Heaven with a single 5850 and those clocks.

 

[jjFarking]

Heaven re-run

jjFarking|XFX 5850|775/1125|1416|X4 965@3913

Like I said: full-screen actually yields a higher score than windowed mode does..

 

[Binge]

I understand, but how are you the only one on the planet with a score that high?

 

[jjFarking]

I'm going to continue to be skeptical. and all you want but nobody gets scores that high in Heaven with a single 5850 and those clocks.

When I OCed my 5850 last month, I scored over 500 points higher :/
But, none of my games made any use of the higher clocks, so I put it back to CCC's 775/1125.
I'm starting to find the sweet point of my CPU/NB/RAM though, so maybe that has an impact.
In GTA IV, I average 59fps every time..
So I must be doing something right

 

[jjFarking]

I understand, but how are you the only one on the planet with a score that high?

Really?
I'm sure I've seen higher scores :/
I'm intrigued now!

 

[Binge]

Dude... you have tessellation off when you run the benchmark. I can see it when looking at your screenshot, the rocks are flat.

 

[H82LUZ73]

Ok some Tropics Dx10.1 run
H82LUZ|1 Palit and 1 Sapphire 4870 in crossfire|750/900|2125|Amd 9950BE @3.2

 

[jjFarking]

Dude... you have tessellation off when you run the benchmark. I can see it when looking at your screenshot, the rocks are flat.

That's partially because you're looking at a screenshot in jpg's renowned quality..
I don't really notice a great deal of difference in speed with tesselation on/off in Unigine, nor in DiRT2. What I do notice is a difference in the way flags/crowds/scenery looks with tesselation off.
Heaven run with tesselation off:

I can assure you that the way it looks on my monitor between tesselation on & off is rather substantial - rocks aren't flat & grass looks semi-believable, as opposed to flat everything..

 

[Binge]

That's partially because you're looking at a screenshot in jpg's renowned quality..
I don't really notice a great deal of difference in speed with tesselation on/off in Unigine, nor in DiRT2. What I do notice is a difference in the way flags/crowds/scenery looks with tesselation off.
Heaven run with tesselation off:
http://img24.imageshack.us/img24/1313/heavenbench5.jpg

I can assure you that the way it looks on my monitor between tesselation on & off is rather substantial - rocks aren't flat & grass looks semi-believable, as opposed to flat everything..

So I have to level with you man... even if it was a JPEG I could tell if you had tessellation on or off from that picture. Running the bench with Tessellation off and getting the same score is proof enough for me, and it should be proof enough for you that something is wrong.

BiNGE|Sapphire 5850|1010/1200|1034|i7 920 @ 4.2GHz

 

[H82LUZ73]

just did Sanctuary Dx10

H82LUZ|1 Palit and 1 Sapphire 4870 in crossfire|750/900|5746|Amd 9950BE @3.2

PS
DOF or Stero3D will crash the demo for me does this matter Binge?

crud wrong res..will redo my run ....

 

[Binge]

just did Sanctuary Dx10

H82LUZ|1 Palit and 1 Sapphire 4870 in crossfire|750/900|7915|Amd 9950BE @3.2

PS
DOF or Stero3D will crash the demo for me does this matter Binge?

crud wrong res..will redo my run ....

you're not supposed to have DOF or Stereo3D, please READ MY POSTS.

 

[jjFarking]

So I have to level with you man... even if it was a JPEG I could tell if you had tessellation on or off from that picture. Running the bench with Tessellation off and getting the same score is proof enough for me, and it should be proof enough for you that something is wrong.

http://i651.photobucket.com/albums/uu239/BiNGEaNiNjA/Unigine.jpg

BiNGE|Sapphire 5850|1010/1200|1034|i7 920 @ 4.2GHz

I'm starting to wonder as well now
Am checking it in wireframe to see if there's an issue somewhere..
Will recheck in DiRT 2 as well, to see if there's anything suss happening there..

Whilst I do notice a quality difference, there's not as much of a difference as I first thought (I just actually sat through the benchmark, which I normally don't do).

I'll check back with whatever results I come up with.
For now, remove my results until you & I both are sure my card is actually employing tesselation correctly..

As of now though, I'm really a little annoyed if there's a problem..

Cheers for picking up on that

 

[Binge]

This is what the stairway and wall should look like.

Not

 

[jjFarking]

This is what the stairway and wall should look like.

http://img.techpowerup.org/100116/Capture.jpg

Not
http://img691.imageshack.us/img691/3862/heavenbench4.jpg

Yup, I just noticed that with an earlier screenshot I had of a month or so ago.
I think I've got a faulty card..
As it is, I cannot use OpenCL & DirectCompute - it's always one or the other, no matter what drivers/hotfix/SDK I use.
I've already been in touch with XFX about it, but they reckon that any issues I have are driver related, not hardware..
Strange thing is, that DiRT 2 most certainly employs tesselation. The only time I really notice a performance degradation is with the crowds being on Ultra setting - all others slow it down only marginally..
There's got to be a bug in there somewhere

 

[jjFarking]

OK.. I'm now officially starting to get screen flickering every so often.
Also, DXDIAG shows that I'm using DX11, but the DDI is 10.1
Something's amiss.
Whatever's gone astray between now and a month or so ago, it's stuffing up my card, or the drivers for it .. or both

 

[Binge]

I was getting window flicker in the tropics demo but only in windowed mode.

 

[jjFarking]

I was getting window flicker in the tropics demo but only in windowed mode.

OK, firstly my apologies if this is going off-topic a little..
Just did a complete removal of all ATI drivers (with Driver Sweeper)
Installed the 9.12 hotfix drivers.. and no Tessellation

Checked Heaven benchmark, used free camera mode and switched back & forth with wire-frame on, to see if the tessellation on/off toggle made a difference. It didn't.
DiRT 2 has the same issue with the crowds now, where the quality setting has no effect at all on the crowds, or indeed anything in the game that uses DX11

As I've been playing GTA IV mainly (which doesn't use DX11 of course), I hadn't really noticed any changes.
Until you pointed out the tessellation in my screenie, I had no idea.
Thanks Binge. At least I know I have an issue that needs serious investigation.
Guess I'll have to have another word or two with XFX support :shadedshu

meh


EDIT: the flicker I had is gone for now though (was doing that in everything, except GTA)

 

[Binge]

why are so many people posting results using x8AA x4AF?

 

[crazyeyesreaper]

i dont know why Binge but may try a list that goes down for things to set ie

Anti Aliasing 4x
Anisotriopic FIltering 8x
etc etc because obviously ppl are seeing AA and AF and getting the frigging backwards for some reason

 

[Binge]

i dont know why Binge but may try a list that goes down for things to set ie

Anti Aliasing 4x
Anisotriopic FIltering 8x
etc etc because obviously ppl are seeing AA and AF and getting the frigging backwards for some reason

I spelled it out, hopefully that'll fix all the issues.

 

[Deleted member 74752]

rickss69|5870|900/1250|2132|i5 670 @ 3.47GHz