- Joined
- Aug 11, 2011
- Messages
- 4,355 (0.94/day)
- Location
- Mexico
| System Name | Dell-y Driver |
|---|---|
| Processor | Core i5-10400 |
| Motherboard | Asrock H410M-HVS |
| Cooling | Intel 95w stock cooler |
| Memory | 2x8 A-DATA 2999Mhz DDR4 |
| Video Card(s) | UHD 630 |
| Storage | 1TB WD Green M.2 - 4TB Seagate Barracuda |
| Display(s) | Asus PA248 1920x1200 IPS |
| Case | Dell Vostro 270S case |
| Audio Device(s) | Onboard |
| Power Supply | Dell 220w |
| Software | Windows 10 64bit |
I came across a cheap 6950 with broken fans. I found cheap replacements on eBay but they are 2 pin fans. I think adapting the plug wouldn't be a problem (1 minute of sanding should do the job) but is there any drawback to this? apart from not being able to control them, that is.
The replacement fans use less current than the originals so I don't think I'll overload the VRMs or anything.
The replacement fans use less current than the originals so I don't think I'll overload the VRMs or anything.
