• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Vista Diablo2LOD Help!

error_f0rce

New Member
Joined
Jun 6, 2006
Messages
938 (0.14/day)
Location
Wisconsin, USA
Processor Intel Core i7-930 (D0) @ 4.0GHz (1.28v)
Motherboard GIGABYTE GA-X58A-UD3R
Cooling CoolIT ECO-R120 Advanced Liquid Cooling w/ x2 Scythe ULTRA-KAZE 3000rpm | Scythe Master controller
Memory Mushkin Enhanced Redline - 6GB DDR3 @ 1910MHz 8-10-8-29
Video Card(s) MSI N460GTX Twin Frozr II SOC GeForce GTX 460 768MB 192-bit GDDR5
Storage RAID-0 w/ 2x OCZ Agility 2 SSD 90GB SATA II 3.5" (r4.6Gb/s w4.2Gb/s)
Display(s) ASUS VW266H - 26" LCD
Case COOLER MASTER Storm Scout | x2 120mm Scythe ULTRA-KAZE | 140mm Scythe Slipstream KAZE Maru2
Power Supply Thermaltake Black Widow TR2 RX - 850w
I cannot run Diablo 2 LOD in software mode in Vista. I already have the latest patch installed. When I open the prog, it thinks about it for a couple seconds, spins up the CD and then nothing. It's running in task manager, but not on the tool bar. I found a couple suggestions online, i.e. "run diablo2.exe, then game.exe, then vid test and it will work", but these are not helping. Does anyone know something for sure that works?!

Thanks!
 

DaMulta

My stars went supernova
Joined
Aug 3, 2006
Messages
16,168 (2.50/day)
Location
Oklahoma T-Town
System Name Work in progress
Processor AMD 955---4Ghz
Motherboard MSi GD70
Cooling OcZ Phase/water
Memory Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card(s) CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Storage SSD 64GB
Display(s) Envision 24'' 1920x1200
Case Using the desk ATM
Audio Device(s) Sucky onboard for now :(
Power Supply 1000W TruePower Quattro
rightclick on the exe/ Set as run in XP mode, and click run as admin.
 

error_f0rce

New Member
Joined
Jun 6, 2006
Messages
938 (0.14/day)
Location
Wisconsin, USA
Processor Intel Core i7-930 (D0) @ 4.0GHz (1.28v)
Motherboard GIGABYTE GA-X58A-UD3R
Cooling CoolIT ECO-R120 Advanced Liquid Cooling w/ x2 Scythe ULTRA-KAZE 3000rpm | Scythe Master controller
Memory Mushkin Enhanced Redline - 6GB DDR3 @ 1910MHz 8-10-8-29
Video Card(s) MSI N460GTX Twin Frozr II SOC GeForce GTX 460 768MB 192-bit GDDR5
Storage RAID-0 w/ 2x OCZ Agility 2 SSD 90GB SATA II 3.5" (r4.6Gb/s w4.2Gb/s)
Display(s) ASUS VW266H - 26" LCD
Case COOLER MASTER Storm Scout | x2 120mm Scythe ULTRA-KAZE | 140mm Scythe Slipstream KAZE Maru2
Power Supply Thermaltake Black Widow TR2 RX - 850w
rightclick on the exe/ Set as run in XP mode, and click run as admin.

Cool, it works good for harware mode now, but it's a little sluggish... sooooooo, I'd like to try and run it in software 2D mode, but that's not working. Any suggestions for that?
 
Top