- Joined
- Apr 20, 2008
- Messages
- 637 (0.11/day)
- Location
- Canada
System Name | Tahiti Treat |
---|---|
Processor | i7 4770K @ 4500MHz |
Motherboard | Asus Maximus VI Hero |
Cooling | Custom H20 |
Memory | Patriot Viper 8GB @ 1866MHz |
Video Card(s) | 2X Sapphire 7870XT (Tahiti Core) @ 1150/1500 CrossFire |
Storage | 2 x Intel 120GB 520 Series SSD Raid0 # 2x Seagate 1TB Raid0 # 1 WD 2TB EARS |
Display(s) | 3 x 22" Eyefinity |
Case | Cosmos S Custom |
Audio Device(s) | Asus X-FI |
Power Supply | Corsair AX860i |
Software | Win7 64Bit Ultimate |
Benchmark Scores | http://www.3dmark.com/3dm11/6848547 |
I have the Phantom case.
The side panel has the mesh at the bottom front corner that houses the two 120mm fans.
I want to place the decal in this corner and it will cover the mesh in places.
My plan is to grab some stick pins and slightly heat them and poke holes to perforate the decal.
Anyone tried this and can comment or recommend a better way in doing this. I only have the one decal so no room for error. I suppose I could go buy something to practice on.
If I have not made my idea clear enough I can provide some pictures to aid in my mumblings.
The side panel has the mesh at the bottom front corner that houses the two 120mm fans.
I want to place the decal in this corner and it will cover the mesh in places.
My plan is to grab some stick pins and slightly heat them and poke holes to perforate the decal.
Anyone tried this and can comment or recommend a better way in doing this. I only have the one decal so no room for error. I suppose I could go buy something to practice on.
If I have not made my idea clear enough I can provide some pictures to aid in my mumblings.