[FS][US] Water cooling part sell off

[terroralpha]

hello,

I repurposed this listing for water cooling parts. i have over 100 fittings and adapters, and I'm getting out of the custom builds business. need to reduce my inventory by 3 fold at least. note the prices on the fittings are negotiable if you take more than couple

i hit the limit in attachments here, more pictures in google drive: https://drive.google.com/drive/folders/1Uxph5GY04Dy14U8aIdD-kzUKgh6-nr7m?usp=sharing


PUMPS:

i have two unused EK D5 PWM bare pumps. Serial numbers start with 201610, meaning they were manufactured in October 2016. i can throw in swiftech pump top/mount with 1/2" barb ends for free.
$65 for each one


--------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------

FITTINGS:

“New” fittings are brand new in factory packaging
“Used” fittings have no corrosion or discoloration. Some had a little paint chip from installation/removal and most of the o-ring have been replaced with phobya o-rings i got from performance PCs.. i'm only selling fittings that i would use myself. for example, i have some primochill "Ghost" fittings which are total shit, those i'm throwing out.
-Prices are per item. shipping is $3 for fittings (price for first class mail w/ tracking). if you buy more i think i can ship it for free, depends on weight, but in any case should not be more than a few dollars to ship.


---1/2 ID, 3/4 OD compression fittings:

Koolance 90* single rotary “elbow” compression in black (Part No. FIT-L13X19-BK)
5x used $4 each (9.5/10 condition)

Bitspower straight, single rotary compression in black (Part No. BP-MBRCPF-CC5V2)
1x new $7


---3/8 ID, 1/2 OD compression fittings:

bitspower straight, non-rotary compression, "CC2 Ultimate" in black (Part No. BP-MBCPF-CC2U)
8x new $7 each


---3/8 ID, 5/8 OD compression fittings: (my favorite size for tubing)

EK straight compression in black (Part No. 3831109846513)
7x new $6 each
3x used 4$ each (9/10 condition)

EK straight compression in black nickel (Part No. 3831109846409)
1x used $3 (the compression part is losing it's color to oxidation, i'm too lazy to clean it)

Bitspower straight, non-rotary compression, in black (Part No. BP-MBCPF-CC3)
12x used $4 each (8/10 condition, most have new o-rings)
4x heavily used $1 each (4/10 condition. zero corrosion but a lot of the paint came off, so lots of the brass is visible)

Bitspower 90* DOUBLE rotary compression, in black
2x used $7 each (7/10 condition, some paint near G 1/4 connection came off)

Bitspower 45* DOUBLE rotary compression, in black
1x used $7 (7/10 condition, some paint near G 1/4 connection came off)

Alphacool 90* rotary compression, in black (Part No. 17081)
1x used $2 (6/10 condition, some scratches visible when looking up close, but still usable. a sharpie can fix this up in jiffy)

Monsoon Free Center compression in silver w/ black o-rings
set of 5 for $15. unused left over from builds, missing some packaging, comes with twist tool.

Monsoon Free Center compression in blue w/ black o-rings
set of 5 for $15. unused left over from builds, missing some packaging, comes with twist tool. i have a sixth blue fitting like this, but it's all scratched up. i'll throw it in for free and you can decide if you want to use it or toss it.


---extensions/bends/adapters

EK 90* DOUBLE rotary adapter in Black Nickel (Part No. 3831109845318)
1x New $7

Bitspower 90* DOUBLE rotary adapter in Matte Black (Part No. BP-MB90R2)
1x new $11

Bitspower 45* non-rotary adapter in Matte Black (Part No. BP-MBWP-C30)
1x new $6 (bag was ripped but fitting was not used)
1x used $2 (7/10 condition, some paint near G 1/4 connection came off)




--------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------

Radiator:

EK-CoolStream XE 240 (Double) radiator. couldn't use it, it didn't fit the intended case. if you do want this rad, account for any fans and attachments you want to put on this thing.

asking price: $60 shipped

--------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------

G.SKILL TridentZ RGB 16GB (2 x 8GB) DDR4 3200MHz (F4-3200C14D-16GTZR). extra set left over from builds. not used at all

asking price $200 ($270 on newegg)

--------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------

 

[cdawall]

Subscribing to watch the radiator.

 

[terroralpha]

added 2 sets of DDR4 RAM, including an RGB set

 

[xkm1948]

Bump for your PSU. I just got the exact same one. Amazing PSU for sure

 

[terroralpha]

Bump for your PSU. I just got the exact same one. Amazing PSU for sure

yea, these things are ridiculous. no matter how hard the power draw surges, and OCed Skylake-X does like lots of power, the voltages across all rails just do not budge. Seasonic over engineered these like old school american and german industrial tools use to be. i love not having to worry about my PSU blowing up. worth every penny and then some.

 

[terroralpha]

updated part numbers, quantities, and pictures

 

[jboydgolfer]

If the ram is still available, do you have a pic of it? I didnt see one ,unless its not showing cuz im on mobile in which case ill see it in the morning.

 

[Totally]

It's the second pic, the warranty sticker peeking through the packaging on the bottom right. Though there aren't any pics of the ek fittings, only the koolance and bitspower fittings are shown.

 

[terroralpha]

If the ram is still available, do you have a pic of it? I didnt see one ,unless its not showing cuz im on mobile in which case ill see it in the morning.

it was the second picture, i took a picture of the back of the box showing the exact model number. that way you know it's Samsung B Die version (CL 14) rather than the Hynix version that doesn't work with ryzen (CL16). i added a picture from the front

It's the second pic, the warranty sticker peeking through the packaging on the bottom right. Though there aren't any pics of the ek fittings, only the koolance and bitspower fittings are shown.

sorry, i thought the picture of the EK fittings was up. the original picture i tried to upload may have been over 2MB and TPU rejected it without me noticing. i took another and uploaded that.

if anyone if interested in any specific item, i can take much better pictures and post them. i just didn't have too much time to do this and it came out very crude. 2 days after posting this stuff, i only got around to fixing spelling errors and updating model numbers today


EDIT: added more bitspower fittings. i have more to add, just have to finish sorting what i need or don't need. if no one is interested in making offers, i'll probably move them to ebay in lots by size.