water in a sg05b?

[bamaland101]

well im getting a sg05b in as a trade, and i have a gtx285 with a mcw60 block on it, and a xspc rasa block for my cpu. was wondering being there isnt much room at all, what would you guys suggest i do radiator wise? would something like a rx120 single rad be enough to cool the GTX 285, and my i5 2400s?

I'll only be doing some light gaming but mainly streaming movies.

open to some suggestions

 

[cdawall]

http://www.techpowerup.com/forums/showthread.php?t=171574

I have a build thread with dual 120mm slim rads installed.

 

[bamaland101]

well i was hoping to be able to fit my slim dvdrw, a 2.5" boot drive, and a 1tb 3.5" hdd
but seems like i'll have to have the hdd in an external enclosure

 

[cdawall]

Yea good luck on that one. Height wise there is not physically enough room to mount a drive with a radiator.

 

[bamaland101]

after looking over your thread and checking out some rads online, i was considering having 2 of these laying sideways and had planned to move them as far right as they can go(away from gpu)
planned to mount a mcp350 pump above the gpu where the squared vent holes are at the back of the case via a custom mounting plate

by keeping the stock top on the pump i'll have to go from my fillport T-line with 3/8" tubing to pump then a 3/8" tubing from pump to my rasa cpu block, then 1/2" tubing to gpu and then on to the rad and back to the t fitting/pump
i doubt this will let me keep my 3.5" hdd but im pretty positive i can mount the 2.5" boot drive on the side of the psu and keep the slim dvdrw where it should be.

 

[cdawall]

They will be to thick IIRC. I have a non-stack model in my closet.