- Joined
- Feb 15, 2007
- Messages
- 1,925 (0.31/day)
Processor | Intel C2D E8500 @ 4.25GHz (1.36V) |
---|---|
Motherboard | Gigabyte GA-X38-DQ6 |
Cooling | (Temporary) Tuniq Tower 120 |
Memory | 2GB Transcend aXeram 1200+ |
Video Card(s) | HIS HD3870 CF Volt modded |
Storage | 3 Seagate 320Gb Barracuda in an Intel Matrix Raid array |
Display(s) | Sony GDM-FW900 24" Widescreen CRT (a.k.a "The Shiznotch") |
Case | Ultra Aluminus Full Tower |
Audio Device(s) | onboard Intel HD audio |
Power Supply | PC Power & Cooling Silencer 750 |
Software | XP MCE + Vista (HP) dual-boot |
Hey all,
I wanted to ask if there is any formula to determine the cooling efficiency of a watercooling setup. I'm asking because I' thinking of making the jump to water, but only if I'm gaining a marked increase in cooling over my Tuniq Tower 120 and my HR-03.
I'm trying to run my e6600 @ 3.8 to 4 GHz and my 1950XT at 750/1000 or higher.
I was thinking of a Danger Den TDX CPU block and a Danger Den Tyee for my 1950XT (I may, because of a package deal, add a block on the chipset.) This would run with a Liang 12V variable pumpthrough a Black Ice Xtreme II with a couple of 56CFM fans pushing through it.
If anyone has some advice/suggestions/experiences with this equipment, please let me know.
Cheers,
Bryan
I wanted to ask if there is any formula to determine the cooling efficiency of a watercooling setup. I'm asking because I' thinking of making the jump to water, but only if I'm gaining a marked increase in cooling over my Tuniq Tower 120 and my HR-03.
I'm trying to run my e6600 @ 3.8 to 4 GHz and my 1950XT at 750/1000 or higher.
I was thinking of a Danger Den TDX CPU block and a Danger Den Tyee for my 1950XT (I may, because of a package deal, add a block on the chipset.) This would run with a Liang 12V variable pumpthrough a Black Ice Xtreme II with a couple of 56CFM fans pushing through it.
If anyone has some advice/suggestions/experiences with this equipment, please let me know.
Cheers,
Bryan