• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

WCG-TPU Cruncher's Hardware/Tech Support Discussion Thread

Norton

Moderator - Returning from the Darkness
Staff member
Joined
Dec 21, 2011
Messages
14,108 (3.15/day)
Location
Northeast USA
System Name Main PC- Gamer- Main Cruncher/Folder and too many crunching/folding rigs
Processor Ryzen 5900X- Ryzen 5950X- Ryzen 3950X and etc...
Motherboard Asrock X570 Extreme4- MSI X570S Tomahawk MAX WiFi- MSI B450M Bazooka Max and etc...
Cooling Noctua NH-U14S (dual fan)- EK 360 AIO with push/pull fans- Corsair H115i RGB Pro XT and etc...
Memory 2x16GB GSkill FlareX 3200/c14- 4x8GB Corsair Vengeance 3600/c16- 2x16GB Team 3600/c18 and etc..
Video Card(s) MSI Gaming RX 6800- Asus RTX 3070 TUF OC- MSI Ventus GTX 1660Ti and etc...
Storage Main PC (1TB WD SN850- 2TB PNY CS 3040- 2TB Seagate Firecuda) and etc...
Display(s) Main PC (2x24" Dell UltraSharp U2414H)
Case Phanteks P600s- Seasonic Q704- Fractal Meshify C and etc...
Audio Device(s) Logitech Z625 THX 2.1 speakers
Power Supply EVGA 750 G3- SeaSonic DGC 750- EVGA P2 850 and etc...
Mouse G300s
Keyboard Corsair K65
VR HMD N/A
Software Windows 10 Pro or Ubuntu
Benchmark Scores Why sit on the Bench when you can get in the game and Crunch!!!
By popular demand.... OP under construction

Please use this thread for hardware related posts and assorted tech/support discussions related to crunching.

*Will expand this OP as the thread grows to link relevant info/important posts/etc...
 

stinger608

Dedicated TPU Cruncher & Folder
Joined
Nov 11, 2008
Messages
11,100 (1.98/day)
Location
Wyoming
System Name Dean Machine/2020 Ryzenfall
Processor Intel 4790K/AMD Ryzen 3700X
Motherboard MSI 1150 Gaming mATX/Gigabyte AORUS ELITE B550
Cooling Cooler Master Hyper 212 LED/SilverStone AH240 AIO
Memory 16 gigs Crucial Ballistix Tactical Tracer/16 gigs G.Skill TridentZ NEO DDR4
Video Card(s) Gigabyte 1660 Super/Gigabyte GTX 1660
Storage Crucial SSD 256 and 2TB spinner/Dual Samsung 980 Pro M2 NVME 4.0
Display(s) Overlord 27" 2560 x 1440
Case Corsair Air 540
Audio Device(s) On board
Power Supply Seasonic modular 850 watt Platinum/EVGA T2-850 Titanium
Software Windows 10 Pro/Windows 10 Pro
I for one think this is an excellent idea. More to the point than the "crunchers helping crunchers" thread.
 

Norton

Moderator - Returning from the Darkness
Staff member
Joined
Dec 21, 2011
Messages
14,108 (3.15/day)
Location
Northeast USA
System Name Main PC- Gamer- Main Cruncher/Folder and too many crunching/folding rigs
Processor Ryzen 5900X- Ryzen 5950X- Ryzen 3950X and etc...
Motherboard Asrock X570 Extreme4- MSI X570S Tomahawk MAX WiFi- MSI B450M Bazooka Max and etc...
Cooling Noctua NH-U14S (dual fan)- EK 360 AIO with push/pull fans- Corsair H115i RGB Pro XT and etc...
Memory 2x16GB GSkill FlareX 3200/c14- 4x8GB Corsair Vengeance 3600/c16- 2x16GB Team 3600/c18 and etc..
Video Card(s) MSI Gaming RX 6800- Asus RTX 3070 TUF OC- MSI Ventus GTX 1660Ti and etc...
Storage Main PC (1TB WD SN850- 2TB PNY CS 3040- 2TB Seagate Firecuda) and etc...
Display(s) Main PC (2x24" Dell UltraSharp U2414H)
Case Phanteks P600s- Seasonic Q704- Fractal Meshify C and etc...
Audio Device(s) Logitech Z625 THX 2.1 speakers
Power Supply EVGA 750 G3- SeaSonic DGC 750- EVGA P2 850 and etc...
Mouse G300s
Keyboard Corsair K65
VR HMD N/A
Software Windows 10 Pro or Ubuntu
Benchmark Scores Why sit on the Bench when you can get in the game and Crunch!!!
@twilyth how did those new coolers work out for your 14c Xeon setup?
 

theonedub

habe fidem
Joined
Apr 30, 2009
Messages
8,025 (1.48/day)
Location
Northern CA, USA
System Name Erakith || AsRock NUCS
Processor AMD ThreadRipper 2990WX ES (32c/64t 3.5ghz@1.02v) || Intel i7 1360P Raptor Lake-P
Motherboard MSI X399 MEG Creation || AsRock OE
Cooling EK Supremacy TR4 Full Nickel, D5 w/ EK Top, 2X EK-CoolStream XTX 360 & Photon 270 Res || OE
Memory 32GB (4x8GB) Corsair Vengeance PRO RGB DDR4 3000|| 2x16GB Corsair DDR4
Video Card(s) Vega 64 EK FC|| Intel Iris Xe
Storage 250gb WD Black NVMe & (2) 2TB Intel 660p NVMe || 2TB Corsair MP600 Pro
Display(s) 34" Dell Ultrasharp U3415W
Case CaseLabs Merlin SM8 || Aluminum Unibody
Power Supply Corsair HX1000
Mouse Corsair Harpoon Wireless RGB
Keyboard Corsair Strafe RGB w/ Cherry MX Silent
Software Windows 10 Pro x64 || WIndows 11 Pro x64
Benchmark Scores WCG & F@H Only
Its all my fault :laugh: Seriously though, this is a long time coming. Should be helpful although it make take some traffic away from the Team thread.
 

manofthem

WCG-TPU Team All-Star!
Joined
Jan 9, 2011
Messages
10,960 (2.27/day)
Location
Florida
Processor 3900X @ 4.0
Motherboard Asus ROG Strix X570-E
Cooling DeepCool Castle 360EX
Memory G Skill Trident Z Neo 32GB 3600
Video Card(s) RX 5700 XT Pulse
Storage Sabrent Rocket Q 1TB
Display(s) LG 34UC88
Case Thermaltake P3
Power Supply Super Flower Leadex III 750w
Mouse Logitech G900
Keyboard G Skill KM570 MX Silver
Software Windows 10 Pro
Just for clarification: is this thread designed mainly for hardware assistance, or are all generic hardware discussions to be directed here as well?

For example, if someone wants to share that they added a new rig to their fleet with an epic build (just sharing/rig done), would it be better suited here or team thread?
 

Norton

Moderator - Returning from the Darkness
Staff member
Joined
Dec 21, 2011
Messages
14,108 (3.15/day)
Location
Northeast USA
System Name Main PC- Gamer- Main Cruncher/Folder and too many crunching/folding rigs
Processor Ryzen 5900X- Ryzen 5950X- Ryzen 3950X and etc...
Motherboard Asrock X570 Extreme4- MSI X570S Tomahawk MAX WiFi- MSI B450M Bazooka Max and etc...
Cooling Noctua NH-U14S (dual fan)- EK 360 AIO with push/pull fans- Corsair H115i RGB Pro XT and etc...
Memory 2x16GB GSkill FlareX 3200/c14- 4x8GB Corsair Vengeance 3600/c16- 2x16GB Team 3600/c18 and etc..
Video Card(s) MSI Gaming RX 6800- Asus RTX 3070 TUF OC- MSI Ventus GTX 1660Ti and etc...
Storage Main PC (1TB WD SN850- 2TB PNY CS 3040- 2TB Seagate Firecuda) and etc...
Display(s) Main PC (2x24" Dell UltraSharp U2414H)
Case Phanteks P600s- Seasonic Q704- Fractal Meshify C and etc...
Audio Device(s) Logitech Z625 THX 2.1 speakers
Power Supply EVGA 750 G3- SeaSonic DGC 750- EVGA P2 850 and etc...
Mouse G300s
Keyboard Corsair K65
VR HMD N/A
Software Windows 10 Pro or Ubuntu
Benchmark Scores Why sit on the Bench when you can get in the game and Crunch!!!
Just for clarification: is this thread designed mainly for hardware assistance, or are all generic hardware discussions to be directed here as well?

For example, if someone wants to share that they added a new rig to their fleet with an epic build (just sharing/rig done), would it be better suited here or team thread?

Thinking we bring most hardware/tech discussions here which would include:
- assistance requests (hardware/software)
- general hardware discussions
- sharing that epic build, etc...

Crunchers Helping Crunchers we'll reserve for:
- "hey anyone got a couple of (insert name of item) that they're willing to part with?"
- "I have a (insert name of item)- anybody want it?"

Team thread
No real restrictions... general Team discussions/BS/etc...

Thoughts?
 

manofthem

WCG-TPU Team All-Star!
Joined
Jan 9, 2011
Messages
10,960 (2.27/day)
Location
Florida
Processor 3900X @ 4.0
Motherboard Asus ROG Strix X570-E
Cooling DeepCool Castle 360EX
Memory G Skill Trident Z Neo 32GB 3600
Video Card(s) RX 5700 XT Pulse
Storage Sabrent Rocket Q 1TB
Display(s) LG 34UC88
Case Thermaltake P3
Power Supply Super Flower Leadex III 750w
Mouse Logitech G900
Keyboard G Skill KM570 MX Silver
Software Windows 10 Pro
Thinking we bring most hardware/tech discussions here which would include:
- assistance requests (hardware/software)
- general hardware discussions
- sharing that epic build, etc...

Crunchers Helping Crunchers we'll reserve for:
- "hey anyone got a couple of (insert name of item) that they're willing to part with?"
- "I have a (insert name of item)- anybody want it?"

Team thread
No real restrictions... general Team discussions/BS/etc...

Thoughts?

Yeah that's cool. I can dig it :laugh:
 
Joined
Oct 6, 2014
Messages
1,424 (0.41/day)
System Name octo1
Processor dual Xeon 2687W ES
Motherboard Supermicro
Cooling dual Noctua NH-D14
Memory generic ECC reg
Video Card(s) 2 HD7950
Storage generic
Case Rosewill Thor
@twilyth how did those new coolers work out for your 14c Xeon setup?
I haven't tried them yet. I'm thinking I might save them for the next build. I haven't decided yet.
 
Joined
Apr 3, 2012
Messages
4,355 (1.00/day)
Location
St. Paul, MN
System Name Bay2- Lowerbay/ HP 3770/T3500-2+T3500-3+T3500-4/ Opti-Con/Orange/White/Grey
Processor i3 2120's/ i7 3770/ x5670's/ i5 2400/Ryzen 2700/Ryzen 2700/R7 3700x
Motherboard HP UltraSlim's/ HP mid size/ Dell T3500 workstation's/ Dell 390/B450 AorusM/B450 AorusM/B550 AorusM
Cooling All stock coolers/Grey has an H-60
Memory 2GB/ 4GB/ 12 GB 3 chan/ 4GB sammy/T-Force 16GB 3200/XPG 16GB 3000/Ballistic 3600 16GB
Video Card(s) HD2000's/ HD 2000/ 1 MSI GT710,2x MSI R7 240's/ HD4000/ Red Dragon 580/Sapphire 580/Sapphire 580
Storage ?HDD's/ 500 GB-er's/ 500 GB/2.5 Samsung 500GB HDD+WD Black 1TB/ WD Black 500GB M.2/Corsair MP600 M.2
Display(s) 1920x1080/ ViewSonic VX24568 between the rest/1080p TV-Grey
Case HP 8200 UltraSlim's/ HP 8200 mid tower/Dell T3500's/ Dell 390/SilverStone Kublai KL06/NZXT H510 W x2
Audio Device(s) Sonic Master/ onboard's/ Beeper's!
Power Supply 19.5 volt bricks/ Dell PSU/ 525W sumptin/ same/Seasonic 750 80+Gold/EVGA 500 80+/Antec 650 80+Gold
Mouse cheap GigaWire930, CMStorm Havoc + Logitech M510 wireless/iGear usb x2/MX 900 wireless kit 4 Grey
Keyboard Dynex, 2 no name, SYX and a Logitech. All full sized and USB. MX900 kit for Grey
Software Mint 18 Sylvia/ Opti-Con Mint KDE/ T3500's on Kubuntu/HP 3770 is Win 10/Win 10 Pro/Win 10 Pro/Win10
Benchmark Scores World Community Grid is my benchmark!!
Joined
Apr 3, 2012
Messages
4,355 (1.00/day)
Location
St. Paul, MN
System Name Bay2- Lowerbay/ HP 3770/T3500-2+T3500-3+T3500-4/ Opti-Con/Orange/White/Grey
Processor i3 2120's/ i7 3770/ x5670's/ i5 2400/Ryzen 2700/Ryzen 2700/R7 3700x
Motherboard HP UltraSlim's/ HP mid size/ Dell T3500 workstation's/ Dell 390/B450 AorusM/B450 AorusM/B550 AorusM
Cooling All stock coolers/Grey has an H-60
Memory 2GB/ 4GB/ 12 GB 3 chan/ 4GB sammy/T-Force 16GB 3200/XPG 16GB 3000/Ballistic 3600 16GB
Video Card(s) HD2000's/ HD 2000/ 1 MSI GT710,2x MSI R7 240's/ HD4000/ Red Dragon 580/Sapphire 580/Sapphire 580
Storage ?HDD's/ 500 GB-er's/ 500 GB/2.5 Samsung 500GB HDD+WD Black 1TB/ WD Black 500GB M.2/Corsair MP600 M.2
Display(s) 1920x1080/ ViewSonic VX24568 between the rest/1080p TV-Grey
Case HP 8200 UltraSlim's/ HP 8200 mid tower/Dell T3500's/ Dell 390/SilverStone Kublai KL06/NZXT H510 W x2
Audio Device(s) Sonic Master/ onboard's/ Beeper's!
Power Supply 19.5 volt bricks/ Dell PSU/ 525W sumptin/ same/Seasonic 750 80+Gold/EVGA 500 80+/Antec 650 80+Gold
Mouse cheap GigaWire930, CMStorm Havoc + Logitech M510 wireless/iGear usb x2/MX 900 wireless kit 4 Grey
Keyboard Dynex, 2 no name, SYX and a Logitech. All full sized and USB. MX900 kit for Grey
Software Mint 18 Sylvia/ Opti-Con Mint KDE/ T3500's on Kubuntu/HP 3770 is Win 10/Win 10 Pro/Win 10 Pro/Win10
Benchmark Scores World Community Grid is my benchmark!!
Joined
Nov 10, 2006
Messages
4,665 (0.74/day)
Location
Washington, US
System Name Rainbow
Processor Intel Core i7 8700k
Motherboard MSI MPG Z390M GAMING EDGE AC
Cooling Corsair H115i, 2x Noctua NF-A14 industrialPPC-3000 PWM
Memory G. Skill TridentZ RGB 4x8GB (F4-3600C16Q-32GTZR)
Video Card(s) ZOTAC GeForce RTX 3090 Trinity
Storage 2x Samsung 950 Pro 256GB | 2xHGST Deskstar 4TB 7.2K
Display(s) Samsung C27HG70
Case Xigmatek Aquila
Power Supply Seasonic 760W SS-760XP
Mouse Razer Deathadder 2013
Keyboard Corsair Vengeance K95
Software Windows 10 Pro
Benchmark Scores 4 trillion points in GmailMark, over 144 FPS 2K Facebook Scrolling (Extreme Quality preset)
Hmm. Should have posted here with my 3930k issues. I originally thought it was proc heat related, but it's locking up even at idle. I bought a Cooler Master Nepton 280L to cram in my little mATX case. The Scythe Mugen Max on it now does a pretty decent job (except for the hottest of summer days), but I suspect airflow over the motherboard is pretty minimal. I'm hoping the Nepton will keep that proc chilly while also providing some nice airflow over the motherboard.

Edit: Next suspicion is PSU.
 
Last edited:

Norton

Moderator - Returning from the Darkness
Staff member
Joined
Dec 21, 2011
Messages
14,108 (3.15/day)
Location
Northeast USA
System Name Main PC- Gamer- Main Cruncher/Folder and too many crunching/folding rigs
Processor Ryzen 5900X- Ryzen 5950X- Ryzen 3950X and etc...
Motherboard Asrock X570 Extreme4- MSI X570S Tomahawk MAX WiFi- MSI B450M Bazooka Max and etc...
Cooling Noctua NH-U14S (dual fan)- EK 360 AIO with push/pull fans- Corsair H115i RGB Pro XT and etc...
Memory 2x16GB GSkill FlareX 3200/c14- 4x8GB Corsair Vengeance 3600/c16- 2x16GB Team 3600/c18 and etc..
Video Card(s) MSI Gaming RX 6800- Asus RTX 3070 TUF OC- MSI Ventus GTX 1660Ti and etc...
Storage Main PC (1TB WD SN850- 2TB PNY CS 3040- 2TB Seagate Firecuda) and etc...
Display(s) Main PC (2x24" Dell UltraSharp U2414H)
Case Phanteks P600s- Seasonic Q704- Fractal Meshify C and etc...
Audio Device(s) Logitech Z625 THX 2.1 speakers
Power Supply EVGA 750 G3- SeaSonic DGC 750- EVGA P2 850 and etc...
Mouse G300s
Keyboard Corsair K65
VR HMD N/A
Software Windows 10 Pro or Ubuntu
Benchmark Scores Why sit on the Bench when you can get in the game and Crunch!!!
I actually have an ole HAF 932 still in the original box. I will probably attempt to use that first. :rockout:

Thanks everyone for the suggestions.

That should work just fine- a HAF 932 can even fit a 4P Opteron board with some modifications ;)
 

stinger608

Dedicated TPU Cruncher & Folder
Joined
Nov 11, 2008
Messages
11,100 (1.98/day)
Location
Wyoming
System Name Dean Machine/2020 Ryzenfall
Processor Intel 4790K/AMD Ryzen 3700X
Motherboard MSI 1150 Gaming mATX/Gigabyte AORUS ELITE B550
Cooling Cooler Master Hyper 212 LED/SilverStone AH240 AIO
Memory 16 gigs Crucial Ballistix Tactical Tracer/16 gigs G.Skill TridentZ NEO DDR4
Video Card(s) Gigabyte 1660 Super/Gigabyte GTX 1660
Storage Crucial SSD 256 and 2TB spinner/Dual Samsung 980 Pro M2 NVME 4.0
Display(s) Overlord 27" 2560 x 1440
Case Corsair Air 540
Audio Device(s) On board
Power Supply Seasonic modular 850 watt Platinum/EVGA T2-850 Titanium
Software Windows 10 Pro/Windows 10 Pro
That should work just fine- a HAF 932 can even fit a 4P Opteron board with some modifications ;)

I actually had a 4P Opteron system in that case a couple of years ago. It was a tight fit but it worked. Hopefully the mounting screw holes line up to the normal case design. Can't remember if it is the same now or not.
 
Joined
Nov 10, 2006
Messages
4,665 (0.74/day)
Location
Washington, US
System Name Rainbow
Processor Intel Core i7 8700k
Motherboard MSI MPG Z390M GAMING EDGE AC
Cooling Corsair H115i, 2x Noctua NF-A14 industrialPPC-3000 PWM
Memory G. Skill TridentZ RGB 4x8GB (F4-3600C16Q-32GTZR)
Video Card(s) ZOTAC GeForce RTX 3090 Trinity
Storage 2x Samsung 950 Pro 256GB | 2xHGST Deskstar 4TB 7.2K
Display(s) Samsung C27HG70
Case Xigmatek Aquila
Power Supply Seasonic 760W SS-760XP
Mouse Razer Deathadder 2013
Keyboard Corsair Vengeance K95
Software Windows 10 Pro
Benchmark Scores 4 trillion points in GmailMark, over 144 FPS 2K Facebook Scrolling (Extreme Quality preset)
Hmm. Still seeing really high temps on the 3930k rig. Ambient temperatures around here today are ~75F. Load temps are 75-80c. CPU voltage doesn't appear to be going over 1.3v. CPU-World reports the T-max at 66.8c, which seems really low. It should be running completely stock right now with a Scythe Mugen Max (from Sneeky, so I would assume it's the exact same one used in his tests.)
From that TweakTown review, the Cooler Master Nepton 280L I recently picked up should only bring a 4c reduction in temps.

Ninja edit: I came home and the rig had rebooted. Not sure if it was heat related or if Win 10 Preview just decided it was going to do updates while I was out.

So, am I doing something wrong, or are these 6-core i7s actually this hard to keep cool?

upload_2015-8-9_15-27-6.png


upload_2015-8-9_15-28-17.png
 

Norton

Moderator - Returning from the Darkness
Staff member
Joined
Dec 21, 2011
Messages
14,108 (3.15/day)
Location
Northeast USA
System Name Main PC- Gamer- Main Cruncher/Folder and too many crunching/folding rigs
Processor Ryzen 5900X- Ryzen 5950X- Ryzen 3950X and etc...
Motherboard Asrock X570 Extreme4- MSI X570S Tomahawk MAX WiFi- MSI B450M Bazooka Max and etc...
Cooling Noctua NH-U14S (dual fan)- EK 360 AIO with push/pull fans- Corsair H115i RGB Pro XT and etc...
Memory 2x16GB GSkill FlareX 3200/c14- 4x8GB Corsair Vengeance 3600/c16- 2x16GB Team 3600/c18 and etc..
Video Card(s) MSI Gaming RX 6800- Asus RTX 3070 TUF OC- MSI Ventus GTX 1660Ti and etc...
Storage Main PC (1TB WD SN850- 2TB PNY CS 3040- 2TB Seagate Firecuda) and etc...
Display(s) Main PC (2x24" Dell UltraSharp U2414H)
Case Phanteks P600s- Seasonic Q704- Fractal Meshify C and etc...
Audio Device(s) Logitech Z625 THX 2.1 speakers
Power Supply EVGA 750 G3- SeaSonic DGC 750- EVGA P2 850 and etc...
Mouse G300s
Keyboard Corsair K65
VR HMD N/A
Software Windows 10 Pro or Ubuntu
Benchmark Scores Why sit on the Bench when you can get in the game and Crunch!!!
@xvi maybe the voltage is a little too high?
 
  • Like
Reactions: xvi
Joined
Nov 10, 2006
Messages
4,665 (0.74/day)
Location
Washington, US
System Name Rainbow
Processor Intel Core i7 8700k
Motherboard MSI MPG Z390M GAMING EDGE AC
Cooling Corsair H115i, 2x Noctua NF-A14 industrialPPC-3000 PWM
Memory G. Skill TridentZ RGB 4x8GB (F4-3600C16Q-32GTZR)
Video Card(s) ZOTAC GeForce RTX 3090 Trinity
Storage 2x Samsung 950 Pro 256GB | 2xHGST Deskstar 4TB 7.2K
Display(s) Samsung C27HG70
Case Xigmatek Aquila
Power Supply Seasonic 760W SS-760XP
Mouse Razer Deathadder 2013
Keyboard Corsair Vengeance K95
Software Windows 10 Pro
Benchmark Scores 4 trillion points in GmailMark, over 144 FPS 2K Facebook Scrolling (Extreme Quality preset)
@xvi maybe the voltage is a little too high?
Intel ARK lists stock voltage up to 1.35v, so that seems within spec, but it should be... wait a minute. That 3.8GHz boost clock is only for 1-2 cores. I bet that's my problem. Still, it seems a lot harder to keep cool than the 8-core FX rig. 4.8GHz and high voltage is easier to keep cool than a 6-core Intel at stock volts and near stock speeds?

upload_2015-8-9_15-59-58.png


Also, I just noticed that it's supposed to be 3.8GHz boost clock, not 4.0GHz so it's technically not at stock speeds, but close enough.
 
Last edited:
Joined
Oct 6, 2014
Messages
1,424 (0.41/day)
System Name octo1
Processor dual Xeon 2687W ES
Motherboard Supermicro
Cooling dual Noctua NH-D14
Memory generic ECC reg
Video Card(s) 2 HD7950
Storage generic
Case Rosewill Thor
Temps from 71 to 79C seem like a pretty broad range. Is there an even coat of TIM on the IHS and did you bolt the HSF down evenly? You need to tighten each screw a quarter turn and go around several times to make sure you have even pressure.
 
  • Like
Reactions: xvi
Joined
Nov 10, 2006
Messages
4,665 (0.74/day)
Location
Washington, US
System Name Rainbow
Processor Intel Core i7 8700k
Motherboard MSI MPG Z390M GAMING EDGE AC
Cooling Corsair H115i, 2x Noctua NF-A14 industrialPPC-3000 PWM
Memory G. Skill TridentZ RGB 4x8GB (F4-3600C16Q-32GTZR)
Video Card(s) ZOTAC GeForce RTX 3090 Trinity
Storage 2x Samsung 950 Pro 256GB | 2xHGST Deskstar 4TB 7.2K
Display(s) Samsung C27HG70
Case Xigmatek Aquila
Power Supply Seasonic 760W SS-760XP
Mouse Razer Deathadder 2013
Keyboard Corsair Vengeance K95
Software Windows 10 Pro
Benchmark Scores 4 trillion points in GmailMark, over 144 FPS 2K Facebook Scrolling (Extreme Quality preset)
Temps from 71 to 79C seem like a pretty broad range. Is there an even coat of TIM on the IHS and did you bolt the HSF down evenly? You need to tighten each screw a quarter turn and go around several times to make sure you have even pressure.
Yeah, for just about everything, I tighten in a cross pattern and then retighten at least once all around. For the Scythe Mugen Max, there's only two bolts (see here for mounting mechanism) and they were both tightened down as far as they'd go (they have a stop built-in). I've actually just finished swapping the Mugen for the Nepton 280L (which was a pain to get in the little mATX case especially since the 140mm holes didn't line up very well). Attached is the TIM spread from the Mugen. I had a hard time tracking down a photo of the 3930k's die, but I think it's a very, very large square that occupies a healthy majority of the IHS. I think coverage may have been minimal and only the center seems to have had good contact. Spread around the edge of the bubble seems thick.

For the Nepton, I went with the "X Method" for applying TIM just to try to promote a large spread. It's considerably later in the day and ambient temps have dropped a bit, but we're at 60c now and temps seem more even. Going from 70-80c down to 60-65c, that Scythe may not have been playing well with the 3930k. =/

upload_2015-8-9_21-4-24.png
upload_2015-8-9_21-24-4.png


Ninja Edit: Attached screenshot showing before and after load temps on graph.
 

Attachments

  • 20150809_182750-small.jpg
    20150809_182750-small.jpg
    421.4 KB · Views: 697
  • 20150809_183153-small.jpg
    20150809_183153-small.jpg
    248 KB · Views: 720
Last edited:
Joined
Oct 6, 2014
Messages
1,424 (0.41/day)
System Name octo1
Processor dual Xeon 2687W ES
Motherboard Supermicro
Cooling dual Noctua NH-D14
Memory generic ECC reg
Video Card(s) 2 HD7950
Storage generic
Case Rosewill Thor
Those are much better temps but still big difference between lowest and highest.

Do you spread the TIM out with your finger or just put it down in a pattern? Because the pattern method doesn't insure even coverage.

I normally put down 4 or 5 small dots about the size of a lower case 'o'. Then I spread it out with my finger. You have to get it so that you can just barely see the metal of the IHS. I gauge this by touching the surface of the chip with my finger tip. If it raises a visible print, I know there's enough in that area. If it doesn't, I know I need more. If pressing with your finger makes some TIM squish out and leaves a dimple, you've got too much.

I probably didn't explain that well. It's something you just get a sense for after a while.
 
  • Like
Reactions: xvi

t_ski

Former Staff
Joined
Apr 11, 2006
Messages
11,960 (1.83/day)
System Name My i7 Beast
Processor Intel Core i7 6800K
Motherboard Asus X99-A II
Cooling Nickel-plated EK Supremacy EVO, D5 with XSPC Bayres & BIX Quad Radiator
Memory 4 x 8GB EVGA SuperSC DDR4-3200
Video Card(s) EVGA 1080 SuperClocked
Storage Samsung 950 Pro 256GB m.2 SSD + 480GB Sandisk storage SSD
Display(s) Three Asus 24" VW246H LCD's
Case Silverstone TJ07
Audio Device(s) Onboard
Power Supply Corsair AX1200
Keyboard Corsair K95
Software Windows 10 x64 Pro
Yeah, for just about everything, I tighten in a cross pattern and then retighten at least once all around. For the Scythe Mugen Max, there's only two bolts (see here for mounting mechanism) and they were both tightened down as far as they'd go (they have a stop built-in). I've actually just finished swapping the Mugen for the Nepton 280L (which was a pain to get in the little mATX case especially since the 140mm holes didn't line up very well). Attached is the TIM spread from the Mugen. I had a hard time tracking down a photo of the 3930k's die, but I think it's a very, very large square that occupies a healthy majority of the IHS. I think coverage may have been minimal and only the center seems to have had good contact. Spread around the edge of the bubble seems thick.

For the Nepton, I went with the "X Method" for applying TIM just to try to promote a large spread. It's considerably later in the day and ambient temps have dropped a bit, but we're at 60c now and temps seem more even. Going from 70-80c down to 60-65c, that Scythe may not have been playing well with the 3930k. =/

View attachment 67250 View attachment 67252

Ninja Edit: Attached screenshot showing before and after load temps on graph.

Going by the attached pics of the heatsink and TIM spread, I would have rotated the heatsink 90 degrees. It looks like the outer two heatpipes weren't being utilized.

Those are much better temps but still big difference between lowest and highest.

Do you spread the TIM out with your finger or just put it down in a pattern? Because the pattern method doesn't insure even coverage.

I normally put down 4 or 5 small dots about the size of a lower case 'o'. Then I spread it out with my finger. You have to get it so that you can just barely see the metal of the IHS. I gauge this by touching the surface of the chip with my finger tip. If it raises a visible print, I know there's enough in that area. If it doesn't, I know I need more. If pressing with your finger makes some TIM squish out and leaves a dimple, you've got too much.

I probably didn't explain that well. It's something you just get a sense for after a while.

This goes against everything we ever learned from Arctic Silver :(
 
Joined
Jul 2, 2008
Messages
8,066 (1.41/day)
Location
Hillsboro, OR
System Name Main/DC
Processor i7-3770K/i7-2600K
Motherboard MSI Z77A-GD55/GA-P67A-UD4-B3
Cooling Phanteks PH-TC14CS/H80
Memory Crucial Ballistix Sport 16GB (2 x 8GB) LP /4GB Kingston DDR3 1600
Video Card(s) Asus GTX 660 Ti/MSI HD7770
Storage Crucial MX100 256GB/120GB Samsung 830 & Seagate 2TB(died)
Display(s) Asus 24' LED/Samsung SyncMaster B1940
Case P100/Antec P280 It's huge!
Audio Device(s) on board
Power Supply SeaSonic SS-660XP2/Seasonic SS-760XP2
Software Win 7 Home Premiun 64 Bit
Joined
Nov 10, 2006
Messages
4,665 (0.74/day)
Location
Washington, US
System Name Rainbow
Processor Intel Core i7 8700k
Motherboard MSI MPG Z390M GAMING EDGE AC
Cooling Corsair H115i, 2x Noctua NF-A14 industrialPPC-3000 PWM
Memory G. Skill TridentZ RGB 4x8GB (F4-3600C16Q-32GTZR)
Video Card(s) ZOTAC GeForce RTX 3090 Trinity
Storage 2x Samsung 950 Pro 256GB | 2xHGST Deskstar 4TB 7.2K
Display(s) Samsung C27HG70
Case Xigmatek Aquila
Power Supply Seasonic 760W SS-760XP
Mouse Razer Deathadder 2013
Keyboard Corsair Vengeance K95
Software Windows 10 Pro
Benchmark Scores 4 trillion points in GmailMark, over 144 FPS 2K Facebook Scrolling (Extreme Quality preset)
I used to spread my TIM, but stopped out of fear for air bubbles. Spread method is still valid?
 

t_ski

Former Staff
Joined
Apr 11, 2006
Messages
11,960 (1.83/day)
System Name My i7 Beast
Processor Intel Core i7 6800K
Motherboard Asus X99-A II
Cooling Nickel-plated EK Supremacy EVO, D5 with XSPC Bayres & BIX Quad Radiator
Memory 4 x 8GB EVGA SuperSC DDR4-3200
Video Card(s) EVGA 1080 SuperClocked
Storage Samsung 950 Pro 256GB m.2 SSD + 480GB Sandisk storage SSD
Display(s) Three Asus 24" VW246H LCD's
Case Silverstone TJ07
Audio Device(s) Onboard
Power Supply Corsair AX1200
Keyboard Corsair K95
Software Windows 10 x64 Pro
I'm still using a "dot" or "line" of paste, depending on the CPU die
 
  • Like
Reactions: xvi
Joined
Nov 10, 2006
Messages
4,665 (0.74/day)
Location
Washington, US
System Name Rainbow
Processor Intel Core i7 8700k
Motherboard MSI MPG Z390M GAMING EDGE AC
Cooling Corsair H115i, 2x Noctua NF-A14 industrialPPC-3000 PWM
Memory G. Skill TridentZ RGB 4x8GB (F4-3600C16Q-32GTZR)
Video Card(s) ZOTAC GeForce RTX 3090 Trinity
Storage 2x Samsung 950 Pro 256GB | 2xHGST Deskstar 4TB 7.2K
Display(s) Samsung C27HG70
Case Xigmatek Aquila
Power Supply Seasonic 760W SS-760XP
Mouse Razer Deathadder 2013
Keyboard Corsair Vengeance K95
Software Windows 10 Pro
Benchmark Scores 4 trillion points in GmailMark, over 144 FPS 2K Facebook Scrolling (Extreme Quality preset)
So, here's something weird. I'm seeing throttling now. Temps are tens of degrees lower than they used to be, but despite that, it's throttling until I ramp up fan speed. Throttling happens on all cores at once. Nothing (measurable) is getting hot! o.0

upload_2015-8-10_18-30-21.png
 
Top