- Joined
- Mar 18, 2010
- Messages
- 590 (0.11/day)
- Location
- Sacramento, Ca
| System Name | GFNmachine |
|---|---|
| Processor | i7 3770k @ 4.4 GHz |
| Motherboard | Gigabyte Z77X-UD3H |
| Cooling | CooliT Vantage |
| Memory | 4x 4 GB G.Skill Ripjaws 1600 MHz DDR3 CL9 |
| Video Card(s) | Galaxy GTX 670 |
| Storage | 1TB WD Black + 200GB WD Black |
| Display(s) | Asus VH242H 24'' @ 1920x1080 |
| Case | Cooler Master CM 690 (Painted black inside) |
| Audio Device(s) | Realtek HD |
| Power Supply | Corsair HX850W |
| Software | Windows 7 Ultimate 64-bit / Ubuntu 12.10 |
I've tried to google this stuff but didn't find anything useful. So, I recently upgraded to Gigabyte Z77X-UD3H and the first thing I noticed is that CCC thinks I am not running CF even when I am. Also, GPU-Z report that CF is disabled. The only time CCC acts normally is when I right click on the tray icon and go to the first card (see image attached).
PS: I have 2 crossfire bridges and I have installed drivers and rebooted several times (registry cleaned and all). These cards have be tested and used with 0 problems on the old motherboard for years, also with the same driver from AMD.
EDIT: Anyone who knows this gigabyte mobo, is there an option I have to enable in the bios?
PS: I have 2 crossfire bridges and I have installed drivers and rebooted several times (registry cleaned and all). These cards have be tested and used with 0 problems on the old motherboard for years, also with the same driver from AMD.
EDIT: Anyone who knows this gigabyte mobo, is there an option I have to enable in the bios?
Attachments
-
gpuz 1st.gif -
gpuz 2nd.gif -
CCC cf.PNG -
device manager.PNG -
CCC tray.jpg
