- Joined
- Jan 24, 2009
- Messages
- 435 (0.08/day)
- Location
- New York
System Name | Unobtainium |
---|---|
Processor | 3600X |
Motherboard | Gigabyte X570S Aorus Elite AX |
Cooling | DH15 Chromax Black |
Memory | 32GB Ripjaws 3200MHz |
Video Card(s) | EVGA 3080 Ti FTW Ultra w/ Alphacool Eiswolf |
Storage | 500GB SN750 | 3.84TB Micron 7450| 4TB SP XS70 |
Display(s) | Asus 144Hz display + LG Ultrafine 4k |
Case | Evolv X |
Audio Device(s) | Schiit Hel + AKG Q701s |
Power Supply | Seasonic FOCUS PX-750 |
Mouse | Logitech G502 Hero |
Keyboard | Filco Majestouch II |
Software | Windows 11 |
Currently I have a side view window on my case which I added myself:
I have also modified the top 140mm fan port for the use of a 120mm fan and a couple other small modifications for better cable management. Here are the results afterward:
Before you say anything: I cannot orient my heat sink to front -back since I have an Ultra Kaze 3000RPM on it. My RAM gets in the way and stuff D: But in the end it works out quite well.
The case looks rough and it will be repainted black along with the interior as well. I will post once I have finished with that. The edges where I cut my view panel will be filed down.
Tell me what you think. I know it isn't as extravagant as some other people's mods, but I like it. It is about 75-80% finished. After everything gets painted, I will be eventually adding in blue cold cathodes.
I would give myself an 8/10 thus far seeing as how it is my first case mod.
For my cables, I would give myself a 9/10 since they are not perfect but far better than before.
Air Flow Rates and fans:
2 74CFM 120mm LED fans (front)
1 ~60CFM 120mm LED (side)
2 110CFM 120mm SlipStream (top and rear)
In: 208CFM
Out: 220CFM
Current Temps:
Idle:
Mobo: 32C
Core 1: 32C
Core 2: 33C
GPU Core: 40-41 (flips back and forth)
HD 1: 28C
HD 2: 26C
Load:
Mobo: 34C (5 runs of ITB)
Core 1: 63C (5 runs of Intel Burn Test)
Core 2: 63C (5 runs Intel Burn Test)
GPU Core: 65C
HD 1: 28C
HD 2: 26C
Update PICS:
UPDATED PICS:
pics!
pics!!
pics!!!
pics!!!!
pics!!!!!
pics!!!!!!
pics!!!!!!!
Sorry about the some of the picture quality D:
Case Panel off:
Case Panel On!:
In teh dark (sorry about the picture quality):
Teh Front:
Teh Back (The paint job isn't perfect but it isn't all that noticable if you do not pay attention to it ):
Teh Top (notice the awesome wooden 140mm to 120mm bracket I made!):
Innards:
Bottom cathode converter box hidden with on and off switches for top and bottom cathodes :
Top cathode converter box hidden away ninja style:
Bottom Cathodes:
Top Cathodes:
Bottom cathode wiring:
Exhaust fan wiring hole :
Front panel under-the-motherboard routing hole:
Front panel wiring slipped through hole ninja style:
Meh mess o' wire hidden from site ninja:
Semi-overview of wiring:
OH NOEZ!
e-e damn ding from installing PSU (it is always a pain in the ass to get it in, but it is now even harder!):
Damn handles didn't turn out well but oh well:
Setup of AWESOMENESS!
Rate my please!
I have also modified the top 140mm fan port for the use of a 120mm fan and a couple other small modifications for better cable management. Here are the results afterward:
Before you say anything: I cannot orient my heat sink to front -back since I have an Ultra Kaze 3000RPM on it. My RAM gets in the way and stuff D: But in the end it works out quite well.
The case looks rough and it will be repainted black along with the interior as well. I will post once I have finished with that. The edges where I cut my view panel will be filed down.
Tell me what you think. I know it isn't as extravagant as some other people's mods, but I like it. It is about 75-80% finished. After everything gets painted, I will be eventually adding in blue cold cathodes.
I would give myself an 8/10 thus far seeing as how it is my first case mod.
For my cables, I would give myself a 9/10 since they are not perfect but far better than before.
Air Flow Rates and fans:
2 74CFM 120mm LED fans (front)
1 ~60CFM 120mm LED (side)
2 110CFM 120mm SlipStream (top and rear)
In: 208CFM
Out: 220CFM
Current Temps:
Idle:
Mobo: 32C
Core 1: 32C
Core 2: 33C
GPU Core: 40-41 (flips back and forth)
HD 1: 28C
HD 2: 26C
Load:
Mobo: 34C (5 runs of ITB)
Core 1: 63C (5 runs of Intel Burn Test)
Core 2: 63C (5 runs Intel Burn Test)
GPU Core: 65C
HD 1: 28C
HD 2: 26C
Update PICS:
UPDATED PICS:
pics!
pics!!
pics!!!
pics!!!!
pics!!!!!
pics!!!!!!
pics!!!!!!!
Sorry about the some of the picture quality D:
Case Panel off:
Case Panel On!:
In teh dark (sorry about the picture quality):
Teh Front:
Teh Back (The paint job isn't perfect but it isn't all that noticable if you do not pay attention to it ):
Teh Top (notice the awesome wooden 140mm to 120mm bracket I made!):
Innards:
Bottom cathode converter box hidden with on and off switches for top and bottom cathodes :
Top cathode converter box hidden away ninja style:
Bottom Cathodes:
Top Cathodes:
Bottom cathode wiring:
Exhaust fan wiring hole :
Front panel under-the-motherboard routing hole:
Front panel wiring slipped through hole ninja style:
Meh mess o' wire hidden from site ninja:
Semi-overview of wiring:
OH NOEZ!
e-e damn ding from installing PSU (it is always a pain in the ass to get it in, but it is now even harder!):
Damn handles didn't turn out well but oh well:
Setup of AWESOMENESS!
Rate my please!
Last edited by a moderator: