• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

What is your max infinity fabric on ryzen 5000? September 2021 edition

What is your max stable ram speed/infinity fabric?

  • 3666/1833 or lower

    Votes: 29 17.1%
  • 3733/1866

    Votes: 32 18.8%
  • 3800/1900

    Votes: 61 35.9%
  • 3866/1933

    Votes: 7 4.1%
  • 3933/1966

    Votes: 4 2.4%
  • 4000/2000

    Votes: 25 14.7%
  • 4066/2033

    Votes: 2 1.2%
  • 4133/2066

    Votes: 3 1.8%
  • 4200/2100 or above

    Votes: 7 4.1%

  • Total voters
    170
Joined
Sep 27, 2021
Messages
157 (0.17/day)
Location
Portugal
Processor Ryzen 7 5800x
Motherboard Msi b450 tomahawk max II
Cooling Artic liquid freezer II 240mm
Memory 2x8Gb B-die @3800 cl14/ 53ns on aida
Video Card(s) Evga 3060 ti ftw3
Storage M.2 Samsung 970 Evo Plus 250gb + 1tb ssd
Case Corsair 275r airflow
Audio Device(s) Hyperx
Power Supply Seasonic core gc 650w 80 plus gold
Mouse Zowie ec2-a
Keyboard Trust
Software Windows 10
Benchmark Scores Cinebench r20: 631/6232 Cinebench r23: 1628/15901 CPU-Z: 672/6960 SotTR:221FPS
1.45V is good for my suggestions :)


Error 0 is usually too low voltage on ram. Try upping by 0.02V, usually fixes it. 15 can be several things, tRFC maybe, but that can often be improved by a bit more volt.


Is the ram in the A2 and B2-slot? Usually this is a problem uf A1-B1 is used as they are the worst slots.
No. they are on a2 and b2. It's weird need to test it without xmp to see if I got errors.
 
Joined
Nov 7, 2021
Messages
27 (0.03/day)
Processor 5900x @ 4.6ghz 1.16v
Motherboard Aorus Elite X570
Cooling Custom Water Loop
Memory G.Skill 3600@ 3800 16-16-16-32 1.45v
Video Card(s) 6900XT Liquid Devil
Case Corsair 900D
Audio Device(s) Strix RAID DLX
Power Supply 1000W Seasonic Platinum
@Valantar mostly what i see is that u defintly get better more efficient results if u tend to clock your cpu at lower speads like 4.5 or 4.6ghz allcore. I am defintly lucky with 4.6ghz at 1.16v under full load, but i see that there is one core not willing to clock higher with slight increased voltage. 4.7ghz is not stable even at 1.25v, maybe needs as high as 1.3v and then the efficency is already getting lost and i get near the power consumption like using pbo. i think pbo always uses high voltages on all cores to maintain high boost posibilty on as much as cores as possible if the best cores are beeing used by some tasks and as i said to be able to get highest boosts for every user as the silicones are never the same
 
Joined
Aug 9, 2019
Messages
1,512 (0.89/day)
Processor Ryzen 5600X@4.85 CO
Motherboard Gigabyte B550m S2H
Cooling BeQuiet Dark Rock Slim
Memory Patriot Viper 4400cl19 2x8@4000cl16 tight subs
Video Card(s) Asus 3060ti TUF OC
Storage WD blue 1TB nvme
Display(s) Lenovo G24-10 144Hz
Case Corsair D4000 Airflow
Power Supply EVGA GQ 650W
Software Windows 10 home 64
Benchmark Scores CB20 4710@4.7GHz Aida64 50.4ns 4.8GHz+4000cl15 tuned ram SOTTR 1080p low 263fps avg CPU game
@Valantar mostly what i see is that u defintly get better more efficient results if u tend to clock your cpu at lower speads like 4.5 or 4.6ghz allcore. I am defintly lucky with 4.6ghz at 1.16v under full load, but i see that there is one core not willing to clock higher with slight increased voltage. 4.7ghz is not stable even at 1.25v, maybe needs as high as 1.3v and then the efficency is already getting lost and i get near the power consumption like using pbo. i think pbo always uses high voltages on all cores to maintain high boost posibilty on as much as cores as possible if the best cores are beeing used by some tasks and as i said to be able to get highest boosts for every user as the silicones are never the same
Still if you tune your curve optimizer max it will generally beat allcore OC.

Here is my scores:
4.4@1.05V 60-65W load
4.5@1.09V 65-70W load
4.6@1.15V 75-80W load
4.7@1.23V 90-100W load
4.8@1.32V 115-125W+ load

Curve optimizer +200 pbo and -30x4/-29x2
4.85@1.34V single core
4.57-4.63@1.16-1.17V@76W

In idle temps with PBO+CO is 40-45C and voltage 0.83-0.85V.

The most comparable 4.6GHz is 45-50W idle and 1.15V.

As you see CO+PBO is superior to allcore OC since you get better single core at lower temp/consumption and very low temp/consumption in idle.
 
Joined
Nov 7, 2021
Messages
27 (0.03/day)
Processor 5900x @ 4.6ghz 1.16v
Motherboard Aorus Elite X570
Cooling Custom Water Loop
Memory G.Skill 3600@ 3800 16-16-16-32 1.45v
Video Card(s) 6900XT Liquid Devil
Case Corsair 900D
Audio Device(s) Strix RAID DLX
Power Supply 1000W Seasonic Platinum
Trc 48, tRFC 264, 272 or 280, twr 16, trtp 8, wtrs 4, wtrl 8 or 10, scl 4 on both. Try that, it should improve your scores quite a bit.
slightly better read speeds and more or less same latency, asking myself if i should use this setting as my daily or go for cl15 or even 14.. but as rares495 wrote i need at least 1.5 to 1.55v for that, questions ist that safe for daily rig
i'm testing the settings now on memtest64, temps are fine with additional fan at 42c

edit on the pbo post:
i can lower my pbo allcore as much minus 25 but it wont change much on the volts, it went down from 1.4v allcore 4.6ghz to 1.35v at 4.65ghz allcore pbo from CO zero to CO minus 25allcore maybe the bios is or was bugged as i used F36e and this bios also caused the problem wih the vddp and vddg settings not sticking. i think i have to give it a try again on the older bios again. Are you using any offset? or just voltage on auto and curve optimizer
 

Attachments

  • Unbenannt3800a.png
    Unbenannt3800a.png
    995.9 KB · Views: 172
Last edited:
Joined
Aug 9, 2019
Messages
1,512 (0.89/day)
Processor Ryzen 5600X@4.85 CO
Motherboard Gigabyte B550m S2H
Cooling BeQuiet Dark Rock Slim
Memory Patriot Viper 4400cl19 2x8@4000cl16 tight subs
Video Card(s) Asus 3060ti TUF OC
Storage WD blue 1TB nvme
Display(s) Lenovo G24-10 144Hz
Case Corsair D4000 Airflow
Power Supply EVGA GQ 650W
Software Windows 10 home 64
Benchmark Scores CB20 4710@4.7GHz Aida64 50.4ns 4.8GHz+4000cl15 tuned ram SOTTR 1080p low 263fps avg CPU game
slightly better read speeds and more or less same latency, asking myself if i should use this setting as my daily or go for cl15 or even 14.. but as rares495 wrote i need at least 1.5 to 1.55v for that, questions ist that safe for daily rig
i'm testing the settings now on memtest64, temps are fine with additional fan at 42c

edit on the pbo post:
i can lower my pbo allcore as much minus 25 but it wont change much on the volts, it went down from 1.4v allcore 4.6ghz to 1.35v at 4.65ghz allcore pbo from CO zero to CO minus 25allcore maybe the bios is or was bugged as i used F36e and this bios also caused the problem wih the vddp and vddg settings not sticking. i think i have to give it a try again on the older bios again. Are you using any offset? or just voltage on auto and curve optimizer
I don't use offset, just plain +200 pbo and -30 on 4 cores and -29 on 2. I recently changed it to +50 and -30 allcore since I like silence and +200 PBO makes CPU cooler aggressive.
 
Joined
Nov 7, 2021
Messages
27 (0.03/day)
Processor 5900x @ 4.6ghz 1.16v
Motherboard Aorus Elite X570
Cooling Custom Water Loop
Memory G.Skill 3600@ 3800 16-16-16-32 1.45v
Video Card(s) 6900XT Liquid Devil
Case Corsair 900D
Audio Device(s) Strix RAID DLX
Power Supply 1000W Seasonic Platinum
I don't use offset, just plain +200 pbo and -30 on 4 cores and -29 on 2. I recently changed it to +50 and -30 allcore since I like silence and +200 PBO makes CPU cooler aggressive.
okay, first i run some tests for the mem to get it stable and use it some days on daily average tasks to avoid running into RAM problems while tuning on the CPU, then i try pbo again.
Any thoughts on running 1.55v on b-die DR for daily use?
 

tabascosauz

Moderator
Supporter
Staff member
Joined
Jun 24, 2015
Messages
7,457 (2.33/day)
Location
Western Canada
System Name ab┃ob
Processor 7800X3D┃5800X3D
Motherboard B650E PG-ITX┃B550-I Strix
Cooling PA120+T30┃AXP120x67
Memory 64GB 6000CL30┃32GB 3600CL14
Video Card(s) RTX 4070 Ti Eagle┃RTX A2000
Storage 8TB of SSDs┃1TB SN550
Display(s) 43" QN90B / 32" M32Q / 27" S2721DGF
Case Caselabs S3┃Lone Industries L5
Power Supply Corsair HX1000┃HDPlex
okay, first i run some tests for the mem to get it stable and use it some days on daily average tasks to avoid running into RAM problems while tuning on the CPU, then i try pbo again.
Any thoughts on running 1.55v on b-die DR for daily use?

1.55V is fine if you keep it cool. Which means a lot of airflow. Either you're running a hurricane through your case with extremely powerful fans, or have a push-pull downdraft cooler like me, or have dedicated ghetto fans for memory, or have your B-die waterblocked.

Why do you need 1.55V for 3800CL16 though? Even CL15 shouldn't need 1.55V.

No. they are on a2 and b2. It's weird need to test it without xmp to see if I got errors.

Turn on Geardown. Or drop to 2T.

You're never going to get anywhere by bruteforcing 1T no GDM with just VDIMM.
 
Joined
Nov 7, 2021
Messages
27 (0.03/day)
Processor 5900x @ 4.6ghz 1.16v
Motherboard Aorus Elite X570
Cooling Custom Water Loop
Memory G.Skill 3600@ 3800 16-16-16-32 1.45v
Video Card(s) 6900XT Liquid Devil
Case Corsair 900D
Audio Device(s) Strix RAID DLX
Power Supply 1000W Seasonic Platinum
1.55V is fine if you keep it cool. Which means a lot of airflow. Either you're running a hurricane through your case with extremely powerful fans, or have a push-pull downdraft cooler like me, or have dedicated ghetto fans for memory, or have your B-die waterblocked.

Why do you need 1.55V for 3800CL16 though? Even CL15 shouldn't need 1.55V.



Turn on Geardown. Or drop to 2T.

You're never going to get anywhere by bruteforcing 1T no GDM with just VDIMM.
i ment 1.55 for further experimentin lowering the timings, running the above setting at 1.45 now.
I got about 14fans in my Corsair 900D on Top 3x 140mm just above the RAMs and there is a little 60mm Fan on the grahpics card blowing directly on the DIMMs :D
no hurricane all silent keeping the water still on a very low delta :)
 
Joined
Aug 9, 2019
Messages
1,512 (0.89/day)
Processor Ryzen 5600X@4.85 CO
Motherboard Gigabyte B550m S2H
Cooling BeQuiet Dark Rock Slim
Memory Patriot Viper 4400cl19 2x8@4000cl16 tight subs
Video Card(s) Asus 3060ti TUF OC
Storage WD blue 1TB nvme
Display(s) Lenovo G24-10 144Hz
Case Corsair D4000 Airflow
Power Supply EVGA GQ 650W
Software Windows 10 home 64
Benchmark Scores CB20 4710@4.7GHz Aida64 50.4ns 4.8GHz+4000cl15 tuned ram SOTTR 1080p low 263fps avg CPU game
okay, first i run some tests for the mem to get it stable and use it some days on daily average tasks to avoid running into RAM problems while tuning on the CPU, then i try pbo again.
Any thoughts on running 1.55v on b-die DR for daily use?
If you have good cooling on them, a fan directly above that can be fine. Some airflow in your rig is nice to have.

No. they are on a2 and b2. It's weird need to test it without xmp to see if I got errors.
1T and no gdm often needs adjusting cad etc. 2T is my general advice. Gdm for those who like even numbers ;)
 
Joined
May 12, 2006
Messages
1,554 (0.24/day)
Location
The Gulag Casino
System Name ROG 7900X3d By purecain
Processor AMD Ryzen 7 7900X3D
Motherboard ASUS Crosshair X670E Hero
Cooling Noctua NH U12A
Memory 64Gb G.Skill Trident Z5 neo RGB 6400@6000mhz@1.41v
Video Card(s) Aorus RTX4090 Extreme Waterforce
Storage 990Pro2Tb-1TbSamsung Evo M.2/ 2TbSamsung QVO/ 1TbSamsung Evo780/ 120gbKingston Now
Display(s) LG 65UN85006LA 65" Smart 4K Ultra HD HDR LED TV
Case Thermaltake CoreX71 Limited Edition Etched Tempered Glass Door
Audio Device(s) On board/NIcomplete audio 6
Power Supply Seasonic FOCUS 1000w 80+
Mouse M65 RGB Elite
Keyboard K95 RGB Platinum
Software Windows11pro
Benchmark Scores [url=https://valid.x86.fr/gtle1y][img]https://valid.x86.fr/cache/banner/gtle1y-6.png[/img][/url]
T



This is what i have stable for now. I havnt tried overclocking the cores individually yet, still working out which are the best cores. :toast:
ZenTimings_Screenshot.png
 
Joined
Sep 27, 2021
Messages
157 (0.17/day)
Location
Portugal
Processor Ryzen 7 5800x
Motherboard Msi b450 tomahawk max II
Cooling Artic liquid freezer II 240mm
Memory 2x8Gb B-die @3800 cl14/ 53ns on aida
Video Card(s) Evga 3060 ti ftw3
Storage M.2 Samsung 970 Evo Plus 250gb + 1tb ssd
Case Corsair 275r airflow
Audio Device(s) Hyperx
Power Supply Seasonic core gc 650w 80 plus gold
Mouse Zowie ec2-a
Keyboard Trust
Software Windows 10
Benchmark Scores Cinebench r20: 631/6232 Cinebench r23: 1628/15901 CPU-Z: 672/6960 SotTR:221FPS
Turn on Geardown.

You're never going to get anywhere by bruteforcing 1T no GDM with just VDIMM.

This is what I need to got it without errors. Thanks now it runs fine, it's time to some oc since this is a good kit
 
Joined
Aug 9, 2019
Messages
1,512 (0.89/day)
Processor Ryzen 5600X@4.85 CO
Motherboard Gigabyte B550m S2H
Cooling BeQuiet Dark Rock Slim
Memory Patriot Viper 4400cl19 2x8@4000cl16 tight subs
Video Card(s) Asus 3060ti TUF OC
Storage WD blue 1TB nvme
Display(s) Lenovo G24-10 144Hz
Case Corsair D4000 Airflow
Power Supply EVGA GQ 650W
Software Windows 10 home 64
Benchmark Scores CB20 4710@4.7GHz Aida64 50.4ns 4.8GHz+4000cl15 tuned ram SOTTR 1080p low 263fps avg CPU game
T



This is what i have stable for now. I havnt tried overclocking the cores individually yet, still working out which are the best cores. :toast:
View attachment 224404
What voltage on ram? If you are at 1.45V try 16 16 16 ras 32 rc 48 rrds 4 faw 16 wtrs 4 wtrl 10 rfc 272 rdrdscl 4 wrwrscl 4 rtp 8 rdwr 10 wrrd 3. If you are below 1.45V try increasing to 1.45V.

Procodt 43 or 48, 53 is too high. Set vddp to 880mv, 1098 is way too high.
 
Joined
Sep 27, 2021
Messages
157 (0.17/day)
Location
Portugal
Processor Ryzen 7 5800x
Motherboard Msi b450 tomahawk max II
Cooling Artic liquid freezer II 240mm
Memory 2x8Gb B-die @3800 cl14/ 53ns on aida
Video Card(s) Evga 3060 ti ftw3
Storage M.2 Samsung 970 Evo Plus 250gb + 1tb ssd
Case Corsair 275r airflow
Audio Device(s) Hyperx
Power Supply Seasonic core gc 650w 80 plus gold
Mouse Zowie ec2-a
Keyboard Trust
Software Windows 10
Benchmark Scores Cinebench r20: 631/6232 Cinebench r23: 1628/15901 CPU-Z: 672/6960 SotTR:221FPS
Hey guys thanks for your help now they run without errors on an 30min occt. I got it at 3800 CL18 but I think I can get it to CL16.
Here some ss of my timmings now and Aida benchmark. I will go to improve it and give updates
 

Attachments

  • ZenTimings_Screenshot.png
    ZenTimings_Screenshot.png
    32.5 KB · Views: 123
  • cachemem.png
    cachemem.png
    86.2 KB · Views: 134

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.21/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
okay @tabascosauz i guess i stay with the board, do you guys think i run into problems clocking the CPU to 4.8 to 4.9ghz if needed? i know it as an inferior VRM design but i am actually more likely to overclock efficiently then bruteforce method. Now im actually very fine with manual oc all@46 at 1.16v under load
@Taraquin ill try that this evening, thank you. Do you think i am in range with the RAM Volts with that values or do i need to set up? Its set to 1.45v hw info showing 1.47v

greetings
I think 4.7 is considered the ceiling for all core, with higher only achieved by PBO boosting lower core counts

If you can get a low voltage OC at 4.7, it's definitely worth considering. Seeing how i get 4.4-5.05 depending on PBO settings and amount of cores loaded, it comes down to whether you need that little bit of extra ST, or more MT performance.
 
Joined
Aug 9, 2019
Messages
1,512 (0.89/day)
Processor Ryzen 5600X@4.85 CO
Motherboard Gigabyte B550m S2H
Cooling BeQuiet Dark Rock Slim
Memory Patriot Viper 4400cl19 2x8@4000cl16 tight subs
Video Card(s) Asus 3060ti TUF OC
Storage WD blue 1TB nvme
Display(s) Lenovo G24-10 144Hz
Case Corsair D4000 Airflow
Power Supply EVGA GQ 650W
Software Windows 10 home 64
Benchmark Scores CB20 4710@4.7GHz Aida64 50.4ns 4.8GHz+4000cl15 tuned ram SOTTR 1080p low 263fps avg CPU game
Hey guys thanks for your help now they run without errors on an 30min occt. I got it at 3800 CL18 but I think I can get it to CL16.
Here some ss of my timmings now and Aida benchmark. I will go to improve it and give updates
Keep 1.45V dimm, try 16 16 16 ras 32 rc 48 rrds 4 rrdl 6 faw 16 wtrs 4 wtrl 8 or 10 rfc 280 or 272 wr 16 rtp 8 rdrd/wrwrscl 4 cwl 16 rest on auto

Set ccd volt and vddp to 900mv, iod to 1020mv. I'm quite sure that will work :)

These are lax timings that should work on most B-die.
 
Joined
Sep 4, 2020
Messages
26 (0.02/day)
System Name Blacky
Processor Ryzen 5 5600
Motherboard NZXT B550 N7 black
Cooling Arctic cooling liquid freezer II 360 Argb
Memory 4x corsair vengance pro
Video Card(s) RTX 3080 Neptune OC 10G
Storage 2TB HDD Seagate+2tb patiot vp4100+256gb s40g
Display(s) Viewsonic VX2428J
Case pccooler c3 500tg black + nzxt fan
Power Supply MSI a1000g
Mouse CM Mastermosue pro l
Keyboard DIY 87 rgb outemu silent white
for daily only 1.45v and everything auto
 

Attachments

  • cachemem.png
    cachemem.png
    86.1 KB · Views: 134
  • ZenTimings_Screenshot_27274047.1107959.png
    ZenTimings_Screenshot_27274047.1107959.png
    32.1 KB · Views: 127
Joined
Nov 5, 2021
Messages
40 (0.05/day)
Error 0 is usually too low voltage on ram. Try upping by 0.02V, usually fixes it. 15 can be several things, tRFC maybe, but that can often be improved by a bit more volt.
whats the maximum safe voltage i can go to? i don't want to go too high. ive heard 1.5v, ill go up by 0.02 and see how it goes
 
Joined
Aug 9, 2019
Messages
1,512 (0.89/day)
Processor Ryzen 5600X@4.85 CO
Motherboard Gigabyte B550m S2H
Cooling BeQuiet Dark Rock Slim
Memory Patriot Viper 4400cl19 2x8@4000cl16 tight subs
Video Card(s) Asus 3060ti TUF OC
Storage WD blue 1TB nvme
Display(s) Lenovo G24-10 144Hz
Case Corsair D4000 Airflow
Power Supply EVGA GQ 650W
Software Windows 10 home 64
Benchmark Scores CB20 4710@4.7GHz Aida64 50.4ns 4.8GHz+4000cl15 tuned ram SOTTR 1080p low 263fps avg CPU game
whats the maximum safe voltage i can go to? i don't want to go too high. ive heard 1.5v, ill go up by 0.02 and see how it goes
1.45V on B-die is considered totally safe. 1.5V is also considered safe, but you must have some airflow if you overclock\tweak a lot at 1.5V or it will overheat and get errors. B-die is very temp sensitive once tweaked\OCed and can throw error at below 50C. 50C can`t kill the ram so temp itself is not the issue.
 
Joined
Nov 5, 2021
Messages
40 (0.05/day)
1.45V on B-die is considered totally safe. 1.5V is also considered safe, but you must have some airflow if you overclock\tweak a lot at 1.5V or it will overheat and get errors. B-die is very temp sensitive once tweaked\OCed and can throw error at below 50C. 50C can`t kill the ram so temp itself is not the issue.
Alright cool its running atm. It spat 2 errors at me but again I didn't launch it in admin mode, unsure why this happens but ‍♂️. Dram temps are at about 55c according to hwinfo.
This is hynix djr though
Edit :I went out and came back and it's currently on its 8th run and given 1 error with code 13
 
Last edited:
Joined
Aug 9, 2019
Messages
1,512 (0.89/day)
Processor Ryzen 5600X@4.85 CO
Motherboard Gigabyte B550m S2H
Cooling BeQuiet Dark Rock Slim
Memory Patriot Viper 4400cl19 2x8@4000cl16 tight subs
Video Card(s) Asus 3060ti TUF OC
Storage WD blue 1TB nvme
Display(s) Lenovo G24-10 144Hz
Case Corsair D4000 Airflow
Power Supply EVGA GQ 650W
Software Windows 10 home 64
Benchmark Scores CB20 4710@4.7GHz Aida64 50.4ns 4.8GHz+4000cl15 tuned ram SOTTR 1080p low 263fps avg CPU game
Alright cool its running atm. It spat 2 errors at me but again I didn't launch it in admin mode, unsure why this happens but ‍♂️. Dram temps are at about 55c according to hwinfo.
This is hynix djr though
Edit :I went out and came back and it's currently on its 8th run and given 1 error with code 13
I'm not sure how DJR handles heat. I know B-die and D-die is sensitive, rev E don't care. Post a zentimings screenshot? Error 13 can be too little voltage.
 
Joined
Aug 9, 2019
Messages
1,512 (0.89/day)
Processor Ryzen 5600X@4.85 CO
Motherboard Gigabyte B550m S2H
Cooling BeQuiet Dark Rock Slim
Memory Patriot Viper 4400cl19 2x8@4000cl16 tight subs
Video Card(s) Asus 3060ti TUF OC
Storage WD blue 1TB nvme
Display(s) Lenovo G24-10 144Hz
Case Corsair D4000 Airflow
Power Supply EVGA GQ 650W
Software Windows 10 home 64
Benchmark Scores CB20 4710@4.7GHz Aida64 50.4ns 4.8GHz+4000cl15 tuned ram SOTTR 1080p low 263fps avg CPU game
Joined
Nov 5, 2021
Messages
40 (0.05/day)
Did you get less errors after increasing voltage? Try upping to 1.48V.
i think i only got the 1 error code 13 over 11 runs, previously i had 2. I was a little concerned though about the ram temps as one dimm was at 59c
 
Joined
Aug 9, 2019
Messages
1,512 (0.89/day)
Processor Ryzen 5600X@4.85 CO
Motherboard Gigabyte B550m S2H
Cooling BeQuiet Dark Rock Slim
Memory Patriot Viper 4400cl19 2x8@4000cl16 tight subs
Video Card(s) Asus 3060ti TUF OC
Storage WD blue 1TB nvme
Display(s) Lenovo G24-10 144Hz
Case Corsair D4000 Airflow
Power Supply EVGA GQ 650W
Software Windows 10 home 64
Benchmark Scores CB20 4710@4.7GHz Aida64 50.4ns 4.8GHz+4000cl15 tuned ram SOTTR 1080p low 263fps avg CPU game
i think i only got the 1 error code 13 over 11 runs, previously i had 2. I was a little concerned though about the ram temps as one dimm was at 59c
Try running 1.42V, see if that does the same? Maybe just one timing is a bit off.
 
Joined
Nov 5, 2021
Messages
40 (0.05/day)
Try running 1.42V, see if that does the same? Maybe just one timing is a bit off.
so i ran it overnight with 20 runs. got 8 errors, i forgot to screenshot it but most were error 0, one error 5 and an error 14 that i seen. Max ram temp was 54c
going to retry at 1.47v with a fan on the ram to see if its temp related

so i ran it overnight with 20 runs. got 8 errors, i forgot to screenshot it but most were error 0, one error 5 and an error 14 that i seen. Max ram temp was 54c
going to retry at 1.47v with a fan on the ram to see if its temp related
@Taraquin so i reran the test twice, once with no fan on the ram and once with a fan on it. (attached is a photo of the run with the fan OFF).
1.47v both times.
second run got 1 error 4 and that was it so it seems heat makes it worse but doesn't solve it.
error 1.47v.png


not sure why it added to the last post but yeah.
 
Last edited:
Top