• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

What is your max infinity fabric on ryzen 5000? September 2021 edition

What is your max stable ram speed/infinity fabric?

  • 3666/1833 or lower

    Votes: 29 17.2%
  • 3733/1866

    Votes: 31 18.3%
  • 3800/1900

    Votes: 61 36.1%
  • 3866/1933

    Votes: 7 4.1%
  • 3933/1966

    Votes: 4 2.4%
  • 4000/2000

    Votes: 25 14.8%
  • 4066/2033

    Votes: 2 1.2%
  • 4133/2066

    Votes: 3 1.8%
  • 4200/2100 or above

    Votes: 7 4.1%

  • Total voters
    169
Joined
Aug 9, 2019
Messages
1,512 (0.89/day)
Processor Ryzen 5600X@4.85 CO
Motherboard Gigabyte B550m S2H
Cooling BeQuiet Dark Rock Slim
Memory Patriot Viper 4400cl19 2x8@4000cl16 tight subs
Video Card(s) Asus 3060ti TUF OC
Storage WD blue 1TB nvme
Display(s) Lenovo G24-10 144Hz
Case Corsair D4000 Airflow
Power Supply EVGA GQ 650W
Software Windows 10 home 64
Benchmark Scores CB20 4710@4.7GHz Aida64 50.4ns 4.8GHz+4000cl15 tuned ram SOTTR 1080p low 263fps avg CPU game
Ill check AIDA later , i tested CB single and im getting better results while the multi are the same.
Yes ill stick to 1867 , my RAM couldnt do stable CL14 at 1900 anyway (have to do CL15 with some timings increased) and i prefer a stable system for when im working on this system, im only trying to push its limits for fun but ofc if i find something stable i wont throw away the extra performance :)
RC and RFC are 'hard' timings. The value between no boot and 100% stable is very small. Example:
On my rev E
RC 54 no boot
RC 55 100% stable, no crashes, but many errors in TM5
RC 56 no errors

RFC 518 no boot
RFC 520 unstable
RFC 522 100% stable

RC and RFC are very important for performance, find lowest stable value for a nice boost. You probably have little gains left on RFC, but RC may do several numbers lower :)
 
  • Like
Reactions: izy
Joined
Aug 26, 2019
Messages
27 (0.02/day)
System Name 2K Beast
Processor 5800x3D
Motherboard x570s Aorus Pro AX
Cooling H100 at top with fans swapped for noctua :) 2x120 Cooler Master push 1x120 Noctua pull
Memory 32gb Gskill 3600gvk C16/16/16 @CL14/14/14 1.45v
Video Card(s) 7900xt 20gb Asus reference version
Storage 1x1tbm.2 (AORUS 7300) 1x2tb m.2 (970 evo plus) 1x4tb m.2 (P3+) 3x4tb seagate HDD, 1x8tb Seagate HDD
Display(s) 1xAOC Agon 27" 2560x1440 144hz 1x28" Samsung 4k 60hz 10bit
Case Silencio S600 (Steel side)
Audio Device(s) On Board Realtek, Altec Lansing 2.1 Speakers, EPOS GSP 670
Power Supply RM750X Corsair
Mouse g302 Logitech
Keyboard 815 Lightspeed Tactile Logitech
VR HMD Nil
Software Win 10 Pro x64
Benchmark Scores Timespy 22521
Gskill 3600 Sammy B die kit running at 4000 with 1.43v still with same timimgs as at 3600 xmp.
All other setting stock Power.
5800x3D, X570S Aorus Pro AX
 

Attachments

  • zen-timings.JPG
    zen-timings.JPG
    49.5 KB · Views: 316
Joined
Oct 16, 2018
Messages
953 (0.48/day)
Location
Uttar Pradesh, India
Processor AMD R7 1700X @ 4100Mhz
Motherboard MSI B450M MORTAR MAX (MS-7B89)
Cooling Phanteks PH-TC14PE
Memory Crucial Technology 16GB DR (DDR4-3600) - C9BLM:045M:E BL16G36C16U4W.M16FE1 X2 @ CL14
Video Card(s) XFX RX480 GTR 8GB @ 1408Mhz (AMD Auto OC)
Storage Samsung SSD 850 EVO 250GB
Display(s) Acer KG271 1080p @ 81Hz
Power Supply SuperFlower Leadex II 750W 80+ Gold
Keyboard Redragon Devarajas RGB
Software Microsoft Windows 10 (10.0) Professional 64-bit
Benchmark Scores https://valid.x86.fr/mvvj3a
Gskill 3600 Sammy B die kit running at 4000 with 1.43v still with same timimgs as at 3600 xmp.
All other setting stock Power.
5800x3D, X570S Aorus Pro AX
When you post Zentimings try not to cut of the bottom part off, that has the RAM model number.

Check for WHEA errors using HWINFO64. You can probably tighten up those timings alot for better performance.

Although 5800X3D does not need fast RAM to perform it can help in some games.
If you want to run that daily you should test with TM5 25 cycles to make sure its stable else you may get data corruption or random reboots.
 

izy

Joined
Jun 30, 2022
Messages
924 (1.45/day)
Run aida to see if performance is the same. Too low IOD usually doesn't affect stability, but it will reduce performance. Example on my setup:
4000 IOD aida ns:
1.04v 53.7ns
1.03v 54ns
1.02v 55-56ns
1.01v 57-59ns

100% stable, just slower.

Kerp 1867 is you get WHEA19 above :) There is little benefit above 1900 since you must raise VDD18 which can't be done on all MBs. I used to run 4000 (I never get WHEA19), but it reqUIRES 1.88V VDD18, which increases CPU-temp by 5-10C vs 1.6v VDD18 I can run at 3800. Performance with 4000 is only about 2% better so not worth it.

Ypu could try lowering WR/RTP btw: keep WR twice of RTP.
14/7
12/6
10/5
May work and give slight boost. RFC and RC may also go lower. RC maybe 52-54, RFC 520, 528 or 536. My previos rev E kit could do 522 at 3733.
Yeah , my ns was 68 69 , i went back to auto on IOD , ill play a bit with the voltages / timings later see if there are any gains there :)
 
Joined
Aug 26, 2019
Messages
27 (0.02/day)
System Name 2K Beast
Processor 5800x3D
Motherboard x570s Aorus Pro AX
Cooling H100 at top with fans swapped for noctua :) 2x120 Cooler Master push 1x120 Noctua pull
Memory 32gb Gskill 3600gvk C16/16/16 @CL14/14/14 1.45v
Video Card(s) 7900xt 20gb Asus reference version
Storage 1x1tbm.2 (AORUS 7300) 1x2tb m.2 (970 evo plus) 1x4tb m.2 (P3+) 3x4tb seagate HDD, 1x8tb Seagate HDD
Display(s) 1xAOC Agon 27" 2560x1440 144hz 1x28" Samsung 4k 60hz 10bit
Case Silencio S600 (Steel side)
Audio Device(s) On Board Realtek, Altec Lansing 2.1 Speakers, EPOS GSP 670
Power Supply RM750X Corsair
Mouse g302 Logitech
Keyboard 815 Lightspeed Tactile Logitech
VR HMD Nil
Software Win 10 Pro x64
Benchmark Scores Timespy 22521
When you post Zentimings try not to cut of the bottom part off, that has the RAM model number.

Check for WHEA errors using HWINFO64. You can probably tighten up those timings alot for better performance.

Although 5800X3D does not need fast RAM to perform it can help in some games.
If you want to run that daily you should test with TM5 25 cycles to make sure its stable else you may get data corruption or random reboots.
I've run AIDA64 stress test for over 90 minutes with no issues I'll look at the timings.

I've re-snipped the Zen timings with the RAM part included. :)

Will Memtest / TM5

Appreciate the tips :)
 

Attachments

  • zen-timing2.JPG
    zen-timing2.JPG
    52.3 KB · Views: 260
Last edited:
Joined
Apr 16, 2008
Messages
80 (0.01/day)
I've run AIDA64 stress test for over 90 minutes with no issues I'll look at the timings.

I've re-snipped the Zen timings with the RAM part included. :)

Will Memtest / TM5

Appreciate the tips :)

What production date is your CPU? I have a 2208PGS

EDIT: and if that's WHEA error free at that IF speed you have a great chip on your hands
 
Last edited:
Joined
Oct 16, 2018
Messages
953 (0.48/day)
Location
Uttar Pradesh, India
Processor AMD R7 1700X @ 4100Mhz
Motherboard MSI B450M MORTAR MAX (MS-7B89)
Cooling Phanteks PH-TC14PE
Memory Crucial Technology 16GB DR (DDR4-3600) - C9BLM:045M:E BL16G36C16U4W.M16FE1 X2 @ CL14
Video Card(s) XFX RX480 GTR 8GB @ 1408Mhz (AMD Auto OC)
Storage Samsung SSD 850 EVO 250GB
Display(s) Acer KG271 1080p @ 81Hz
Power Supply SuperFlower Leadex II 750W 80+ Gold
Keyboard Redragon Devarajas RGB
Software Microsoft Windows 10 (10.0) Professional 64-bit
Benchmark Scores https://valid.x86.fr/mvvj3a
Joined
Aug 26, 2019
Messages
27 (0.02/day)
System Name 2K Beast
Processor 5800x3D
Motherboard x570s Aorus Pro AX
Cooling H100 at top with fans swapped for noctua :) 2x120 Cooler Master push 1x120 Noctua pull
Memory 32gb Gskill 3600gvk C16/16/16 @CL14/14/14 1.45v
Video Card(s) 7900xt 20gb Asus reference version
Storage 1x1tbm.2 (AORUS 7300) 1x2tb m.2 (970 evo plus) 1x4tb m.2 (P3+) 3x4tb seagate HDD, 1x8tb Seagate HDD
Display(s) 1xAOC Agon 27" 2560x1440 144hz 1x28" Samsung 4k 60hz 10bit
Case Silencio S600 (Steel side)
Audio Device(s) On Board Realtek, Altec Lansing 2.1 Speakers, EPOS GSP 670
Power Supply RM750X Corsair
Mouse g302 Logitech
Keyboard 815 Lightspeed Tactile Logitech
VR HMD Nil
Software Win 10 Pro x64
Benchmark Scores Timespy 22521
What production date is your CPU? I have a 2208PGS

EDIT: and if that's WHEA error free at that IF speed you have a great chip on your hands
No errors from Memtest, MT5 or AIDA64. What does WHEA stand for? Nevermind googled it basically BSOD. None of those either. Stable as hell.

How do I find production date. CPU Z doesn't show it.

PS Not cracking my cooler to look on CPU :p
 
  • Haha
Reactions: izy

izy

Joined
Jun 30, 2022
Messages
924 (1.45/day)
No errors from Memtest, MT5 or AIDA64. What does WHEA stand for? Nevermind googled it basically BSOD. None of those either. Stable as hell.

How do I find production date. CPU Z doesn't show it.

PS Not cracking my cooler to look on CPU :p
Open HWINFO while you stress testing and you can see if you get WHEAs or not.
 

freeagent

Moderator
Staff member
Joined
Sep 16, 2018
Messages
7,420 (3.67/day)
Location
Winnipeg, Canada
System Name Altered Beast
Processor AMD R9 5900X/5800X3D
Motherboard Asus Crosshair VIII Dark Hero
Cooling Thermalright Phantom Spirit 120 EVO, 1x T30
Memory 2x8 G.Skill Trident Z Royal 3200C14, 2x8GB G.Skill Trident Z Black and White 3200 C14
Video Card(s) Zotac 4070 Ti Trinity OC
Storage WD SN850X 2TB, SN850 1TB, SN770 1TB - Asus Hyper M.2, 2x SN770 1TB
Display(s) LG 50UP7100
Case Fractal Torrent Compact RGB
Audio Device(s) JBL 2.1 Deep Bass
Power Supply EVGA SuperNova 750w G+, Monster HDP1800
Mouse Logitech G502 Hero
Keyboard Logitech G213
VR HMD Oculus 3
Software Yes
Benchmark Scores Yes
My max stable FCLK 2022 version:

5600X 2000MHz (2/25/21)
5800X3D 1933MHz (9/28/22)
5900X 1900MHz (5/24/21)

They can all go further, sometimes much further... but they wouldn't be stable.

I won't be buying anymore AM4 CPUs unless they make something pretty kick axe, but I doubt it.
 
Joined
Apr 16, 2008
Messages
80 (0.01/day)
No errors from Memtest, MT5 or AIDA64. What does WHEA stand for? Nevermind googled it basically BSOD. None of those either. Stable as hell.

How do I find production date. CPU Z doesn't show it.

PS Not cracking my cooler to look on CPU :p

For WHEA errors you need to go into Event Viewer and look for them. You can make a custom search filter for them, too. It's the only for sure way. With HWinfo it will only show errors if they occur while it's running. In my case I could open up HWinfo and not see any errors for hours and hours. Run OCCT for an hour not see an error. So the only for sure way is to look in Event Viewer because they are always logged.

Search 'By source' 'Event sources:' and you can scroll down to WHEA-Logger.

I wouldn't be surprised if you have them. If you do you'll see Event ID 18 which is usually a voltage issue, or Event ID 19 which is Bus/Interconnect Error, which is the most common.
 
Last edited:
Joined
Aug 26, 2019
Messages
27 (0.02/day)
System Name 2K Beast
Processor 5800x3D
Motherboard x570s Aorus Pro AX
Cooling H100 at top with fans swapped for noctua :) 2x120 Cooler Master push 1x120 Noctua pull
Memory 32gb Gskill 3600gvk C16/16/16 @CL14/14/14 1.45v
Video Card(s) 7900xt 20gb Asus reference version
Storage 1x1tbm.2 (AORUS 7300) 1x2tb m.2 (970 evo plus) 1x4tb m.2 (P3+) 3x4tb seagate HDD, 1x8tb Seagate HDD
Display(s) 1xAOC Agon 27" 2560x1440 144hz 1x28" Samsung 4k 60hz 10bit
Case Silencio S600 (Steel side)
Audio Device(s) On Board Realtek, Altec Lansing 2.1 Speakers, EPOS GSP 670
Power Supply RM750X Corsair
Mouse g302 Logitech
Keyboard 815 Lightspeed Tactile Logitech
VR HMD Nil
Software Win 10 Pro x64
Benchmark Scores Timespy 22521
For WHEA errors you need to go into Event Viewer and look for them. You can make a custom search filter for them, too. It's the only for sure way. With HWinfo it will only show errors if they occur while it's running. In my case I could open up HWinfo and not see any errors for hours and hours. Run OCCT for an hour not see an error. So the only for sure way is to look in Event Viewer because they are always logged.

Search 'By source' 'Event sources:' and you can scroll down to WHEA-Logger.

I wouldn't be surprised if you have them. If you do you'll see Event ID 18 which is usually a voltage issue, or Event ID 19 which is Bus/Interconnect Error, which is the most common.
Thankyou am getting a lot of Event ID 19 errors. But everything runs fine. Any suggestions? Do i start bumping voltages as I have only done that to the RAM at this stage.
 

izy

Joined
Jun 30, 2022
Messages
924 (1.45/day)
Thankyou am getting a lot of Event ID 19 errors. But everything runs fine. Any suggestions? Do i start bumping voltages as I have only done that to the RAM at this stage.
Mine does the same (everything works fine) and i couldnt get rid of WHEAs without going to 1867MHZ FCLK (i didnt try with unsafe high voltages) but on the good side i could OC my RAM better running CL14.
 
Joined
Apr 16, 2008
Messages
80 (0.01/day)
Thankyou am getting a lot of Event ID 19 errors. But everything runs fine. Any suggestions? Do i start bumping voltages as I have only done that to the RAM at this stage.

The only thing, in my experience, that fixed/helped, was to lower the IF speed. I have borderline stability at 1900 with never getting any WHEA errors while gaming but it will throw maybe 1 WHEA 19 error while running OCCT. I left it at 1900 for the longest time but was always having trouble with OCing my GPU. Kept getting Wattman crashes, weird frame dropping issues, etc. I've recently dropped down to 1866/3733MHz and so far the system seems a lot more stable!

I did try lowering VDDG IOD, and CCD and that's when I got a WHEA 18 error. Too low of vSOC voltage will also do it too but usually my system wouldn't boot in the first place.

I'd drop down to 1866 and start from there. With my chip I can do vSOC 1.018 at 1866 & 1900. The odd thing is if I get close to 1.08 I start getting weird audio issues.
 
Joined
Aug 26, 2019
Messages
27 (0.02/day)
System Name 2K Beast
Processor 5800x3D
Motherboard x570s Aorus Pro AX
Cooling H100 at top with fans swapped for noctua :) 2x120 Cooler Master push 1x120 Noctua pull
Memory 32gb Gskill 3600gvk C16/16/16 @CL14/14/14 1.45v
Video Card(s) 7900xt 20gb Asus reference version
Storage 1x1tbm.2 (AORUS 7300) 1x2tb m.2 (970 evo plus) 1x4tb m.2 (P3+) 3x4tb seagate HDD, 1x8tb Seagate HDD
Display(s) 1xAOC Agon 27" 2560x1440 144hz 1x28" Samsung 4k 60hz 10bit
Case Silencio S600 (Steel side)
Audio Device(s) On Board Realtek, Altec Lansing 2.1 Speakers, EPOS GSP 670
Power Supply RM750X Corsair
Mouse g302 Logitech
Keyboard 815 Lightspeed Tactile Logitech
VR HMD Nil
Software Win 10 Pro x64
Benchmark Scores Timespy 22521
Mine does the same (everything works fine) and i couldnt get rid of WHEAs without going to 1867MHZ FCLK (i didnt try with unsafe high voltages) but on the good side i could OC my RAM better running CL14.
Setting all voltages to normal I've gotten to 1867/3733 with no errors. Will try faster if doesn't work I'll give the ram more juice and see if I can get to cas 14/14/14
 

freeagent

Moderator
Staff member
Joined
Sep 16, 2018
Messages
7,420 (3.67/day)
Location
Winnipeg, Canada
System Name Altered Beast
Processor AMD R9 5900X/5800X3D
Motherboard Asus Crosshair VIII Dark Hero
Cooling Thermalright Phantom Spirit 120 EVO, 1x T30
Memory 2x8 G.Skill Trident Z Royal 3200C14, 2x8GB G.Skill Trident Z Black and White 3200 C14
Video Card(s) Zotac 4070 Ti Trinity OC
Storage WD SN850X 2TB, SN850 1TB, SN770 1TB - Asus Hyper M.2, 2x SN770 1TB
Display(s) LG 50UP7100
Case Fractal Torrent Compact RGB
Audio Device(s) JBL 2.1 Deep Bass
Power Supply EVGA SuperNova 750w G+, Monster HDP1800
Mouse Logitech G502 Hero
Keyboard Logitech G213
VR HMD Oculus 3
Software Yes
Benchmark Scores Yes
Looks like core0 is a ripper :rockout:


ripper.png
 
Joined
Aug 26, 2019
Messages
27 (0.02/day)
System Name 2K Beast
Processor 5800x3D
Motherboard x570s Aorus Pro AX
Cooling H100 at top with fans swapped for noctua :) 2x120 Cooler Master push 1x120 Noctua pull
Memory 32gb Gskill 3600gvk C16/16/16 @CL14/14/14 1.45v
Video Card(s) 7900xt 20gb Asus reference version
Storage 1x1tbm.2 (AORUS 7300) 1x2tb m.2 (970 evo plus) 1x4tb m.2 (P3+) 3x4tb seagate HDD, 1x8tb Seagate HDD
Display(s) 1xAOC Agon 27" 2560x1440 144hz 1x28" Samsung 4k 60hz 10bit
Case Silencio S600 (Steel side)
Audio Device(s) On Board Realtek, Altec Lansing 2.1 Speakers, EPOS GSP 670
Power Supply RM750X Corsair
Mouse g302 Logitech
Keyboard 815 Lightspeed Tactile Logitech
VR HMD Nil
Software Win 10 Pro x64
Benchmark Scores Timespy 22521
Thanks for the tips everyone. looks like my best without WHEA's is 1900/3800 ram wouldn't stay below cas16 without issues even with voltage to 1.45. So it's all running at Standard Voltages both with improved inf & ram clocks :) Pretty happy with that as it's my first time OC'ing anything in years!
 

rzfndrkt

New Member
Joined
Jan 17, 2023
Messages
3 (0.01/day)
This is my result with stock DOCP timing. VSOC 1.1v. VDIMM 1.4v. Frequency manual. FCLK manual . Anyone can help me to tighten timings? Im stuck at tRFC. I followed the github DDR4 OC Guide
 

Attachments

  • taiphon.jpg
    taiphon.jpg
    207.8 KB · Views: 168
  • OC RAM.jpg
    OC RAM.jpg
    130.1 KB · Views: 180

izy

Joined
Jun 30, 2022
Messages
924 (1.45/day)
This is my result with stock DOCP timing. VSOC 1.1v. VDIMM 1.4v. Frequency manual. FCLK manual . Anyone can help me to tighten timings? Im stuck at tRFC. I followed the github DDR4 OC Guide
You dont get WHEA errors at that speed?
 
Joined
Aug 9, 2019
Messages
1,512 (0.89/day)
Processor Ryzen 5600X@4.85 CO
Motherboard Gigabyte B550m S2H
Cooling BeQuiet Dark Rock Slim
Memory Patriot Viper 4400cl19 2x8@4000cl16 tight subs
Video Card(s) Asus 3060ti TUF OC
Storage WD blue 1TB nvme
Display(s) Lenovo G24-10 144Hz
Case Corsair D4000 Airflow
Power Supply EVGA GQ 650W
Software Windows 10 home 64
Benchmark Scores CB20 4710@4.7GHz Aida64 50.4ns 4.8GHz+4000cl15 tuned ram SOTTR 1080p low 263fps avg CPU game
This is my result with stock DOCP timing. VSOC 1.1v. VDIMM 1.4v. Frequency manual. FCLK manual . Anyone can help me to tighten timings? Im stuck at tRFC. I followed the github DDR4 OC Guide
RAS 40
RC 60
RRDS 4
RRDL 6
FAW 16
RFC 560 (600)
WR 16
WRWRSCL 4
RDRDSCL 4
CWL 16
RTP 8
RDWR 10
WRRD 1
 
Joined
Aug 9, 2019
Messages
1,512 (0.89/day)
Processor Ryzen 5600X@4.85 CO
Motherboard Gigabyte B550m S2H
Cooling BeQuiet Dark Rock Slim
Memory Patriot Viper 4400cl19 2x8@4000cl16 tight subs
Video Card(s) Asus 3060ti TUF OC
Storage WD blue 1TB nvme
Display(s) Lenovo G24-10 144Hz
Case Corsair D4000 Airflow
Power Supply EVGA GQ 650W
Software Windows 10 home 64
Benchmark Scores CB20 4710@4.7GHz Aida64 50.4ns 4.8GHz+4000cl15 tuned ram SOTTR 1080p low 263fps avg CPU game
I edited my post, i got WHEA errors with OCCT AVX2
Most people get WHEA19 above 3800, some even at 3733, but if you get rare WHEA19 it doesn't matter that much. If you get lots of them the potentially slows down your system.
 

rzfndrkt

New Member
Joined
Jan 17, 2023
Messages
3 (0.01/day)
Most people get WHEA19 above 3800, some even at 3733, but if you get rare WHEA19 it doesn't matter that much. If you get lots of them the potentially slows down your system.
No WHEA erros at 3800 (test occt avx2). Stock DOCP timing
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.21/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
This is my result with stock DOCP timing. VSOC 1.1v. VDIMM 1.4v. Frequency manual. FCLK manual . Anyone can help me to tighten timings? Im stuck at tRFC. I followed the github DDR4 OC Guide

Looking at your images, you've got it pretty close to the best you might be getting

Higher DRAM voltage (and cooling the RAM) might help you get lower timings by a small amount, but if you get WHEA errors, black screen crashes etc you'll need to raise VSOC instead - dont confuse DRAM errors with SoC/IF errors

SoC at 1.08v is low, my setup will boot with that but i get random crashes/errors glitches all over the place, raising it slowly reduces how often they happen til around the 1.125v mark, 1.125v to 1.15v let me go from 3600 to 3866
 
Joined
Oct 29, 2022
Messages
51 (0.10/day)
Location
Romania
Run aida to see if performance is the same. Too low IOD usually doesn't affect stability, but it will reduce performance. Example on my setup:
4000 IOD aida ns:
1.04v 53.7ns
1.03v 54ns
1.02v 55-56ns
1.01v 57-59ns

100% stable, just slower.

Kerp 1867 is you get WHEA19 above :) There is little benefit above 1900 since you must raise VDD18 which can't be done on all MBs. I used to run 4000 (I never get WHEA19), but it reqUIRES 1.88V VDD18, which increases CPU-temp by 5-10C vs 1.6v VDD18 I can run at 3800. Performance with 4000 is only about 2% better so not worth it.

Ypu could try lowering WR/RTP btw: keep WR twice of RTP.
14/7
12/6
10/5
May work and give slight boost. RFC and RC may also go lower. RC maybe 52-54, RFC 520, 528 or 536. My previos rev E kit could do 522 at 3733.
Hi guys need help, I can't find VDD18 on my board, MSI Tomahawk X570, only VDD IP8 I can change value to 1.900, does any owners can tell, thx
 

Attachments

  • Screenshot 2021-01-04 173719.jpg
    Screenshot 2021-01-04 173719.jpg
    161.3 KB · Views: 87
  • IMG-20230212-WA0000.jpg
    IMG-20230212-WA0000.jpg
    125.4 KB · Views: 76
Top